Shadowhawk S1007 Flashlight Instruction Manual

Introduction

The Shadowhawk S1007 is a high-performance rechargeable LED flashlight designed for various lighting needs, from everyday use to emergency situations. It incorporates advanced technology to provide powerful illumination, durability, and user-friendly features. This manual provides comprehensive instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.

Figure 1: Shadowhawk S1007 Flashlight and included accessories.

Setup

1. Unboxing and Initial Inspection

Carefully open the protective case and remove all components. Inspect the flashlight and accessories for any visible damage. Ensure all items listed in the 'What's in the Box' section are present.

2. Battery Installation

The Shadowhawk S1007 supports dual power supply options: a rechargeable Lithium Ion battery (included) or three AAA batteries (included with holder). For initial setup, install the provided rechargeable battery.

1. Unscrew the tail cap of the flashlight counter-clockwise.
2. Insert the rechargeable Lithium Ion battery with the positive (+) end facing towards the flashlight head (towards the LED).
3. Securely screw the tail cap back on clockwise until snug.

Figure 2: Dual power supply options for the Shadowhawk S1007.

3. Initial Charging

Before first use, fully charge the flashlight. The LCD digital display will show the charging progress.

1. Locate the USB-C charging port on the flashlight body (usually covered by a rubber flap).
2. Connect the provided USB-C cable to the flashlight's charging port.
3. Plug the other end of the USB-C cable into a compatible USB power source (e.g., wall adapter, computer USB port).
4. The LCD display will show the battery percentage increasing during charging. A full charge typically takes 3-5 hours.

Figure 3: Charging the Shadowhawk S1007 via USB-C.

Operating Instructions

1. Power On/Off

Press the power button located on the flashlight body to turn the flashlight on. The LCD display will activate, showing the current battery percentage. To turn off the flashlight from any mode, press and hold the power button for 3 seconds.

2. Switching Light Modes

The flashlight offers 5 lighting modes. With the flashlight on, short press the power button to cycle through the modes in the following order:

• High: Maximum brightness (2000 Lumens).
• Medium: Moderate brightness.
• Low: Lowest brightness, ideal for extended runtime (up to 12 hours).
• Strobe: Flashing light for signaling or disorientation.
• SOS: International Morse code signal for emergencies.

Figure 4: The 5 lighting modes of the Shadowhawk S1007.

3. Adjustable Focus (Zoom Function)

The flashlight features an adjustable focus mechanism to switch between a wide floodlight and a narrow spotlight beam.

• Floodlight (Wide Beam): Pull the flashlight head outwards to expand the beam, illuminating a wider area (e.g., a 2160 sq ft room).
• Spotlight (Narrow Beam): Push the flashlight head inwards to concentrate the beam, providing a long-range focus (up to 3937 feet).

Figure 5: Adjusting the flashlight beam from wide to narrow.

4. USB Output (Emergency Power Bank)

The flashlight can serve as an emergency power bank to charge other devices.

1. Open the rubber flap covering the USB ports.
2. Connect your device's charging cable (USB-A end) to the USB output port on the flashlight.
3. The flashlight will begin charging your device.

Figure 6: USB input and output ports for charging and power bank function.

5. Official Product Videos

Maintenance

1. General Care and Cleaning

The Shadowhawk S1007 is made of aviation-grade aluminum alloy and is IP67 waterproof, making it highly durable. To maintain its condition:

• Wipe the flashlight body with a soft, damp cloth to remove dirt or debris.
• Avoid using harsh chemicals or abrasive materials that could damage the finish or lens.
• Ensure the USB port cover is securely closed when not in use to maintain its waterproof rating.

Figure 7: The flashlight's IP67 waterproof feature.

2. Battery Care

To prolong battery life and ensure safe operation:

• Charge the battery fully before long-term storage.
• Store the flashlight in a cool, dry place away from direct sunlight and extreme temperatures.
• If using AAA batteries, remove them if the flashlight will not be used for an extended period to prevent leakage.

Troubleshooting

1. Flashlight Not Turning On

• Ensure the battery is correctly installed with the positive (+) end facing the flashlight head.
• Check the battery level on the LCD display. If low, charge the flashlight fully.
• Verify that the tail cap is securely tightened.

2. Charging Issues

• Ensure the USB-C cable is properly connected to both the flashlight and the power source.
• Try a different USB-C cable or power adapter.
• If the flashlight emits smoke or unusual odors during charging, immediately disconnect it from the power source and discontinue use. Contact customer support for assistance.

3. Dim or Flickering Light

• Charge the battery fully. Low battery can cause dimming or flickering.
• Ensure the flashlight head and tail cap are securely tightened.
• Clean the lens with a soft, lint-free cloth.

Specifications

What's in the Box

• 1 x Shadowhawk S1007 Flashlights High Lumens
• 1 x Rechargeable Battery and USB-C Cable
• 3 x AAA Battery and Holder
• Lanyard
• Holster
• 1 x Operation Manual and Gift box

Figure 8: Contents of the Shadowhawk S1007 kit.

Warranty

The Shadowhawk S1007 flashlight comes with a limited warranty. Please refer to the Operation Manual included in the gift box for specific terms and conditions.

Support

For any questions or assistance regarding your Shadowhawk S1007 high-powered flashlight, please feel free to contact our 24/7 customer service. We are dedicated to solving your problems.