1. Introduction
Thank you for choosing the Senhozi Matte Black Bidet Sprayer with Hot and Cold Mixing Valve. This product is designed to provide a hygienic and comfortable cleansing experience with adjustable water temperature and spray patterns. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Image: Senhozi Matte Black Bidet Sprayer with Hot and Cold Mixing Valve, showcasing its sleek design.
2. Safety Information
- Always turn off the main water supply before beginning any installation or maintenance.
- Ensure all connections are tight to prevent leaks. Do not overtighten.
- Verify water temperature before use to avoid scalding or discomfort.
- Do not use abrasive cleaners or harsh chemicals on the product finish.
- If you are unsure about any installation steps, consult a qualified plumber.
3. Package Contents
Please verify that all components are present before installation:
- Handheld Bidet Sprayer Head (x1)
- Hot and Cold Mixing Valve (x1)
- Metal Braided Hose (x1)
- Mounting Screw Bag (x1)
- Decorative Plate (x1)
- Teflon Tape (x1)
Image: Exploded view of the bidet sprayer kit components, including the sprayer head, mixing valve, hose, and accessories.
4. Specifications
| Feature | Description |
|---|---|
| Brand | Senhozi |
| Model Name | SE-0002-2-BK |
| Color | Matte Black |
| Material | Brass, Stainless Steel |
| Mounting Type | Wall Mount |
| Number of Handles | 1 |
| Special Features | 360 Swivel, Adjustable, Dual Function Sprayer |
| Hose Length | 47 inches (Metal Braided) |
| Product Dimensions | 5.31"D x 4.3"W x 2.47"H |
5. Setup and Installation
Professional installation is recommended. Ensure the main water supply is turned off before proceeding.
Step 1: Prepare Wall for Mixer Installation
Refer to the essential dimension diagram to determine the optimal position for the mixer. Mark the drilling points on the wall. After drilling the holes, insert the self-tapping rubber anchors into the wall.
Image: Diagram showing how to measure and mark the wall for the mixer's position and insert wall anchors.
Step 2: Connect Water Pipes to Mixer
Connect the hot and cold water pipes to the inlet ports of the mixing valve. You have two options:
- Option 1 (Using NPT Accessories): Roll several cycles of Teflon tape onto the NPT accessories, then connect them to the hot and cold water inlet pipes.
- Option 2 (Without NPT Accessories): If your plumbing setup does not require NPT accessories, connect the hot and cold water pipes directly to the mixing valve.
Image: Diagram illustrating the connection of hot and cold water pipes using NPT accessories and Teflon tape.
Image: Diagram illustrating the direct connection of hot and cold water pipes to the mixing valve without NPT accessories.
Step 3: Install Decorative Plate and Shower Holder
- Step 3A: Place the decorative plate onto the faucet body, ensuring it sits flush against the wall.
- Step 3B: Insert the brass connector into the shower holder.
Image: Diagram showing the decorative plate being placed onto the faucet body.
Image: Diagram showing the brass connector being inserted into the shower holder.
Step 4: Connect Hose and Handle
- Step 4A: Securely attach the shower hose to both the bidet sprayer head and the shower connector on the mixing valve.
- Step 4B: Install the handle onto the cartridge of the mixing valve.
Image: Diagram showing the shower hose connected to the bidet sprayer and the mixing valve's connector.
Image: Diagram showing the handle being installed onto the mixing valve's cartridge.
After completing all connections, slowly turn on the main water supply and check for any leaks. Tighten connections as needed.
Image: The Senhozi bidet sprayer fully installed and mounted on the wall next to a toilet.
6. Operating Instructions
Adjusting Water Temperature
The mixing valve allows you to control the water temperature. Rotate the handle on the mixing valve to blend hot and cold water to your desired temperature. Test the water temperature before directing the spray.
Image: Diagram illustrating the hot and cold water mixing function of the valve.
Using the Sprayer and Adjusting Spray Patterns
The handheld bidet sprayer offers two spray functions: a soft spray and a jet spray. To activate the spray, press the lever on the sprayer head. To switch between spray patterns, rotate the nozzle at the tip of the sprayer head.
- Soft Spray: Ideal for gentle cleansing.
- Jet Spray: Provides stronger pressure for thorough cleaning.
Image: Hand holding the bidet sprayer, demonstrating the soft spray and jet spray options.
Image: Close-up of the bidet sprayer head, showing how to rotate the nozzle to change spray patterns.
After each use, release the lever and ensure the water flow has stopped completely. Return the sprayer to its holder.
7. Maintenance
Cleaning
To maintain the finish and performance of your bidet sprayer:
- Clean regularly with a soft cloth and mild soap.
- Avoid using abrasive cleaners, scouring pads, or chemicals containing ammonia, bleach, or alcohol, as these can damage the finish.
- For mineral deposits on the nozzle, gently wipe with a cloth dampened with vinegar, then rinse thoroughly with water.
Leak Prevention
Periodically check all connections for tightness. If a leak occurs, turn off the water supply, tighten the connection, and re-check. If leaks persist, inspect the O-rings and washers for damage and replace if necessary.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Water leaks from connections | Loose connections, damaged washers/O-rings | Tighten connections. Replace worn washers or O-rings. Ensure Teflon tape was applied correctly. |
| No water flow or weak spray | Water supply off, clogged nozzle, kinked hose | Ensure main water supply is on. Clean nozzle holes. Straighten hose. |
| Water temperature is not adjustable | Hot/cold water supply issues, mixing valve malfunction | Check hot and cold water supply lines. Ensure mixing valve handle is functioning correctly. |
| Sprayer lever is stiff | Mineral buildup, internal component issue | Clean the sprayer head. If problem persists, contact customer support. |
9. Warranty and Support
Senhozi products are manufactured to high-quality standards. For specific warranty details or technical support, please refer to the product packaging or contact Senhozi customer service through the retailer where the product was purchased. Please have your model number (SE-0002-2-BK) available when contacting support.