Introduction
Thank you for choosing the VITCOCO Portable Electric Travel Bidet. This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your new device. Please read this manual thoroughly before first use and retain it for future reference.
Product Overview
The VITCOCO Portable Electric Travel Bidet is designed for personal hygiene on the go, offering a convenient and effective cleaning solution. Its compact size, rechargeable battery, and waterproof design make it ideal for travel, postpartum care, baby care, and daily use.
Components
- Main Bidet Unit (with nozzle and control buttons)
- 200ml Water Bottle
- Bottle Adapter (for connecting standard mineral water bottles)
- USB Charging Cable
- Storage Pouch
Figure 1: Overview of the VITCOCO Portable Electric Travel Bidet and its included accessories.
Key Features
- Rechargeable Battery: Equipped with a Lithium-Ion battery, rechargeable via USB. A full charge provides approximately 60 uses.
- Two Spray Modes: Offers two pressure settings (weak and strong) for customized cleaning.
- 180° Rotatable Nozzle: The nozzle can be rotated 180 degrees for optimal angle and reach.
- IPX7 Waterproof: The entire unit is waterproof, allowing for easy cleaning and use in wet environments.
- Bottle Adapter: Allows connection to various standard mineral water bottles for increased water capacity.
Figure 2: The bidet features a 180-degree rotatable nozzle and two spray modes for versatile use.
Figure 3: The included adapter allows connection to various standard water bottles, expanding water capacity.
Setup and Charging
Initial Charging
Before first use, fully charge the bidet unit. Connect the provided USB charging cable to the bidet's charging port and a compatible USB power source (e.g., mobile phone charger, USB power bank, car USB charger, laptop USB port). The charging indicator light will show charging status.
Figure 4: The bidet can be conveniently charged via the included USB cable using various common USB power sources.
Assembling the Bidet
- Ensure the bidet unit is fully charged.
- Twist the main bidet unit onto the provided 200ml water bottle or a compatible mineral water bottle using the adapter if necessary. Ensure it is securely fastened to prevent leaks.
- Fill the bottle with clean water (preferably 10-50 degrees Celsius warm water for comfort).
- Extend the nozzle by rotating it 180 degrees until it clicks into place.
Figure 5: Step-by-step assembly and preparation for using the bidet.
Operating Instructions
Once assembled and filled with water:
- Position the bidet unit with the nozzle pointing towards the area to be cleaned.
- Press the power button once for the first spray mode (gentle).
- Press the power button a second time for the second spray mode (strong).
- To turn off the bidet, press the power button a third time.
- Adjust the angle of the nozzle as needed during use for effective cleaning.
The bidet is suitable for various personal hygiene needs, including:
- General daily cleansing
- Postpartum care
- Baby care (diaper changes)
- Travel and outdoor activities
- Hemorrhoid relief and wound cleaning
Figure 6: The bidet provides convenient personal hygiene for various situations.
Figure 7: The bidet offers comfortable and gentle cleansing, suitable for sensitive skin and baby care.
Maintenance and Cleaning
Due to its IPX7 waterproof rating, the entire bidet unit can be washed. For optimal hygiene and longevity:
- After each use, empty any remaining water from the bottle.
- Rinse the bidet unit and bottle with clean water. You may use mild soap if necessary.
- Ensure the water temperature for cleaning does not exceed 50 degrees Celsius (122 degrees Fahrenheit).
- Allow all components to air dry completely before reassembling or storing.
- Store the bidet in its provided storage pouch in a cool, dry place.
Figure 8: The compact design ensures easy portability and storage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No spray or weak spray |
|
|
| Water leakage |
|
|
| Bidet does not turn on |
|
|
Specifications
| Feature | Detail |
|---|---|
| Model Number | JSQ-BL |
| Manufacturer | VITCOCO |
| Item Weight | 10.9 ounces |
| Product Dimensions | 2.09 x 2.09 x 6.3 inches |
| Battery Type | 1 Lithium Ion battery (required) |
| Waterproof Rating | IPX7 |
| Water Bottle Capacity | 200ml (included) |
Warranty and Support
For warranty information or technical support, please contact VITCOCO customer service. Refer to the product packaging or the official VITCOCO website for contact details.
For additional resources and product information, visit the official VITCOCO store: VITCOCO Store on Amazon.
