Qfun STL321S 3-10 Mil Thermal Laminator Machine User Manual

1. Important Safety Instructions

Please read all instructions carefully before using the laminator. Retain this manual for future reference.

• Do not operate the laminator with a damaged power cord or plug.
• Keep the laminator away from water or other liquids to prevent electric shock.
• Ensure the laminator is placed on a stable, flat surface with adequate ventilation.
• Do not insert objects other than laminating pouches into the feed slot.
• Unplug the laminator when not in use or before cleaning.
• Keep out of reach of children. The laminator operates at high temperatures.

2. Package Contents

Verify that all items are present in the package:

• Qfun STL321S Thermal Laminator Machine
• Assorted Laminating Sheets (30 sheets)
• Cool Down Tray Prongs
• Cleaning Sheet
• Instruction Manual (this document)

3. Product Overview

Familiarize yourself with the components of your Qfun laminator.

Figure 3.1: Front view of the Qfun STL321S Laminator in operation, showing documents entering and exiting the machine.

Control Panel and Indicators

Figure 3.2: Detailed view of the laminator's control panel, featuring the REV button, thickness options (10MIL, 7MIL, 5MIL, 3MIL), POWER indicator, and READY indicator.

• POWER Switch: Located at the back of the unit, turns the laminator on/off.
• REV Button: Reverses the rollers to clear paper jams.
• Thickness Options (3MIL, 5MIL, 7MIL, 10MIL): Buttons to select the desired laminating pouch thickness.
• POWER Indicator: Illuminates when the machine is powered on.
• READY Indicator: Illuminates green when the laminator has reached the selected operating temperature.
• Feed Slot: Where laminating pouches are inserted.
• Exit Slot: Where laminated documents emerge.

4. Setup

1. Unpack: Carefully remove the laminator and all accessories from the packaging.
2. Placement: Place the laminator on a flat, stable, and heat-resistant surface. Ensure there is enough space behind the machine for laminated documents to exit freely.
3. Connect Power: Plug the power cord into a standard electrical outlet.
4. Install Cool Down Tray (Optional): Insert the provided prongs into the designated slots at the back of the laminator to create a cool-down tray for finished documents.

5. Operating Instructions

5.1 Power On and Warm-up

1. Flip the POWER switch located at the back of the laminator to the 'ON' position. The POWER indicator light on the control panel will illuminate.
2. Select the desired laminating pouch thickness (e.g., 3MIL, 5MIL, 7MIL, 10MIL) by pressing the corresponding button.
3. The laminator will begin to warm up. The READY indicator light will flash during warm-up and turn solid green once the machine has reached the optimal temperature for the selected thickness. Warm-up time is approximately 60-90 seconds for 3 mil pouches.

5.2 Laminating Process

Figure 5.1: Examples of documents and items suitable for lamination with the Qfun STL321S, such as menus, certificates, and infographics.

1. Place your document or item centrally into a laminating pouch, leaving a small margin around the edges. Ensure the pouch is clean and free of dust.
2. Once the READY light is solid green, carefully insert the sealed edge of the laminating pouch into the feed slot. Ensure the pouch is inserted straight and centered.
3. The laminator will automatically feed the pouch through. Do not pull or push the pouch during the lamination process.
4. Once the laminated document exits the machine, place it on the cool-down tray or a flat surface to cool and harden. Avoid touching the hot laminated item immediately.

5.3 Jam-Free Operation (REV Button)

The Qfun STL321S features a reversible motor to help clear misfed or jammed documents.

Figure 5.2: Visual guide on common causes of paper jams (slanted insertion, incorrect placement, oversized film) and how the REV button helps resolve them.

• If a laminating pouch becomes jammed or misfed, immediately press and hold the REV button.
• The rollers will reverse, allowing you to gently pull the pouch out of the feed slot.
• Once the pouch is removed, inspect it for damage. If reusable, re-insert it correctly.

5.4 Automatic Shut-off

For safety and energy conservation, the laminator is equipped with an intelligent 30-minute automatic shutdown function. If the machine is idle for 30 minutes, it will automatically power off.

6. Maintenance

6.1 Cleaning the Rollers

Figure 6.1: The cool-down tray and the included cleaning sheet, essential for maintaining the laminator's rollers.

• To prevent glue residue buildup and ensure optimal performance, use the provided cleaning sheet periodically.
• With the laminator warmed up, feed the cleaning sheet through the machine as you would a regular laminating pouch.
• Repeat this process if necessary until the rollers are clean.

6.2 Storage

When not in use, ensure the laminator is unplugged and completely cooled down. Store it in a dry, dust-free environment.

7. Troubleshooting

8. Specifications

9. Warranty and Support

Qfun offers comprehensive support for your laminator:

• Lifetime Technical Support: Assistance with any technical questions or issues.
• 2-Year After-sales Service: Coverage for manufacturing defects and operational issues.
• 30-Day Refund: If you are not satisfied with your purchase, you may be eligible for a refund within 30 days.

For any questions or assistance, please contact Qfun customer service. Refer to your purchase documentation for specific contact details.