Comfytemp Wireless TENS Unit Instruction Manual

1. Introduction

The Comfytemp Wireless TENS Unit is a muscle stimulator designed for pain relief and muscle relaxation. This device offers a convenient and comfortable therapy experience without the hassle of wires, making it ideal for on-the-go use. It features dual control options, allowing operation via a remote control with 30 modes and 20 intensity levels, or directly via physical buttons on the unit with 5 modes. The unit comes with premium electrode pads designed for secure adhesion and reusability, targeting various body areas for effective pain management.

Figure 1: Comfytemp Wireless TENS Unit, showing the main device, remote control, and various electrode pads.

2. Package Contents

Please ensure all items listed below are included in your package:

• 2 x Host (TENS Units)
• 2 x 1-piece Butterfly Shape Electrode Pads (5.2 x 2.4 inches)
• 2 x 2-piece Line Shape Electrode Pads (3.5 x 2.8 inches)
• 1 x Remote Control
• 1 x Dual-head Charging Cable (USB-C)
• 1 x Microfiber Storage Pouch
• Instruction Manual

Figure 2: All components included in the Comfytemp Wireless TENS Unit package.

3. Setup

Before first use, fully charge both TENS units using the provided dual-head charging cable. Ensure your skin is clean and dry before applying the electrode pads for optimal adhesion and conductivity.

1. Charge the Units: Connect the dual-head USB-C cable to both TENS units and a power source. Charge until the indicator light shows full charge.
2. Prepare Skin: Clean the area of skin where you intend to apply the electrode pads. Ensure it is free of oils, lotions, and sweat.
3. Attach Pads to Units: The electrode pads connect magnetically to the TENS units. Align the metal contacts on the unit with the corresponding points on the pad and snap them together.
4. Apply to Skin: Carefully peel the protective film from the electrode pad. Apply the pad firmly to the desired painful area on your body. Ensure good contact with the skin.

Figure 3: Visual guide for applying the TENS unit: Peel the film, stick the pad to the skin, and press the unit.

4. Operating Instructions

4.1. Using with Remote Control

The remote control offers full access to all 30 modes and 20 intensity levels, along with timer settings.

1. Turn On: Ensure the TENS unit(s) are attached to your skin. Short press the power button on each TENS unit to turn them on. Then, turn on the remote control.
2. Select Mode: Press the "M" button on the remote control to cycle through the 30 available modes. The selected mode will be displayed on the remote's screen.
3. Adjust Intensity: Use the "+" and "-" buttons to increase or decrease the impulse intensity. Start with a low intensity and gradually increase until you feel a comfortable, yet effective, sensation.
4. Set Timer: Long press the "T/min" button to adjust the treatment time from 10 to 60 minutes.
5. Stop: Press the "STOP" button on the remote for a one-click stop function.

Figure 4: The remote control provides comprehensive control over the TENS unit's functions.

4.2. Using without Remote Control (Button Control)

For quick and convenient use, the TENS unit can be operated directly via its physical buttons. Note that only 5 modes are available in this control method, with a fixed 30-minute timer.

1. Turn On: Ensure the TENS unit(s) are attached to your skin. Short press the power button on the unit to turn it on.
2. Select Mode: Short press the "M" button on the unit to cycle through the 5 available modes.
3. Adjust Intensity: Use the "+" and "-" buttons on the unit to adjust the intensity.
4. Fixed Timer: The treatment time is automatically set to 30 minutes.
5. Stop: Short press the power button again to turn off the unit.

Figure 5: The TENS unit itself features buttons for basic control when the remote is not available.

5. Maintenance

Proper maintenance ensures the longevity and effectiveness of your TENS unit and electrode pads.

• Cleaning Electrode Pads: When the electrode pads lose adhesion, rinse them with water and gently scrape off any surface residue. Allow them to air-dry completely. This process can renew adhesion, enabling reuse for 60+ cycles.
• Storage: After each use, reattach the protective film to the electrode pads. Store the TENS units, remote, and pads in the provided microfiber pouch to keep them clean and protected.
• Battery Care: Recharge the units as needed. Avoid fully depleting the battery frequently to prolong its lifespan.

6. Troubleshooting

If you experience issues with your Comfytemp Wireless TENS Unit, consider the following:

• No Sensation/Weak Sensation:
  • Ensure units are fully charged.
  • Check that electrode pads are firmly attached to the skin and units.
  • Increase intensity level gradually.
  • Ensure skin is clean and dry.
• Unit Not Turning On:
  • Verify units are charged.
  • Ensure power button is pressed correctly.
• Remote Not Responding:
  • Check remote battery (extra battery included).
  • Ensure units are turned on and within range.

For persistent issues, please refer to the Warranty and Support section for contact information.

7. Specifications

8. Warranty and Support

Comfytemp is committed to providing excellent customer service and product reliability.

• Warranty: This product comes with a 365-day warranty from the date of purchase.
• Returns: Enjoy a 30-day free return policy.
• Customer Support: For any inquiries, technical assistance, or warranty claims, please contact our customer support team. We offer 24-hour quick customer support.

Figure 6: Comfytemp's commitment to customer satisfaction, including warranty and support details.

Legal Disclaimer: Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.