1. Safety Information
Always read and understand all instructions before operating the lawn sweeper. Failure to follow safety guidelines may result in injury or property damage.
- Operator Safety: Ensure only trained individuals operate the towing vehicle and sweeper. Keep children and pets away from the operating area.
- Vehicle Compatibility: Use with a riding mower or tractor equipped with a suitable hitch.
- Terrain: Operate on level ground. Avoid steep slopes or uneven terrain that could cause tipping or loss of control.
- Debris: Clear the area of large objects (rocks, branches) that could damage the sweeper or be thrown.
- Speed: Operate at a safe, slow speed. Excessive speed can reduce sweeping effectiveness and increase risk of accidents.
- Maintenance: Always turn off the towing vehicle and engage the parking brake before performing any adjustments or maintenance.
2. Product Overview
The Brinly 42-inch Tow-Behind Lawn Sweeper is designed for efficient collection of various lawn debris. Its robust construction and thoughtful features ensure effective performance and ease of use.
Key Features:
- 42-inch Sweep Width: Covers a significant area with each pass.
- 20 cu. ft. Hamper Capacity: Reduces the frequency of emptying.
- High-Velocity Brushes: Six brushes with a 5:1 gear ratio ensure continuous material pickup.
- Twist-Lock Height Adjustment: Easily adjust brush height for various lawn conditions and debris types.
- Collapsible Hamper Braces: Designed for easier assembly and convenient upright storage.
- Universal Attachment: Compatible with most riding mowers and zero-turn radius mowers.
Figure 1: Brinly 42-inch Tow-Behind Lawn Sweeper, Model LS2-42BH-GA.
3. Assembly Instructions
The Brinly Lawn Sweeper requires assembly. Follow the steps below carefully. Refer to the included manual for detailed diagrams and part lists.
3.1. Frame and Hitch Assembly
- Attach the hitch tubes to the main sweeper housing using the provided bolts and nuts. Ensure all connections are secure.
- Assemble the hitch bracket to the hitch tubes. This bracket allows for universal attachment to various towing vehicles.
3.2. Hamper Assembly
- Assemble the hamper frame using the rear hopper tube, lower hopper side tubes, and upper hopper side tubes.
- Slide the hopper support rods into the designated sleeves on the hamper bag.
- Secure the hamper bag to the assembled frame, ensuring all attachment points are fastened.
- Attach the pull rope to the hamper for easy emptying from the tractor seat.
Figure 2: Side view of the Brinly Lawn Sweeper, showing the hamper and wheel assembly.
4. Setup and Operation
4.1. Attaching to Your Tractor
Connect the sweeper's hitch to the hitch plate on your riding mower or tractor using the provided pin. Ensure the connection is secure before operation.
Video 1: Demonstrates the attachment of the Brinly Lawn Sweeper to a riding mower, highlighting the universal tractor fit.
4.2. Adjusting Brush Height
The sweeper features a Twist-Lock Height Adjustment lever. Adjust the brush height so that the brushes just make contact with the top of the grass or debris. For heavier debris like leaves, a lower setting may be more effective. For light thatch or grass clippings, a higher setting might suffice. The indexed settings help maintain consistent performance.
Figure 3: Close-up of the brush height adjustment lever on the Brinly Lawn Sweeper.
4.3. Sweeping Your Lawn
Drive your towing vehicle at a consistent, moderate speed. Overlap your passes slightly to ensure complete coverage. The high-velocity brushes will continuously pick up leaves, grass clippings, pine needles, and thatch, depositing them into the hamper.
Video 2: Shows the Brinly Lawn Sweeper in action, effectively collecting leaves and debris from a lawn.
4.4. Emptying the Hamper
When the hamper is full, drive to your desired dumping location. Use the included pull-rope with an ergonomic T-handle to empty the hamper directly from the seat of your tractor. This allows for quick and convenient disposal of collected material.
Figure 4: The hamper being emptied using the pull-rope mechanism while the operator remains on the tractor.
5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your Brinly Lawn Sweeper.
- Clean After Each Use: Remove all debris from the brushes and hamper after each use to prevent buildup and maintain efficiency.
- Inspect Brushes: Periodically check the brushes for wear or damage. Replace worn brushes to ensure effective sweeping.
- Lubrication: Lubricate moving parts as recommended in the detailed product manual to ensure smooth operation.
- Hardware Check: Ensure all bolts, nuts, and pins are tight and secure before each operation.
6. Troubleshooting
If you encounter issues with your lawn sweeper, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Poor debris pickup | Incorrect brush height, worn brushes, excessive speed | Adjust brush height, replace brushes, reduce towing speed |
| Hamper not emptying completely | Overfilled hamper, debris caught | Empty more frequently, clear any obstructions manually |
| Sweeper not tracking straight | Uneven terrain, improper hitch connection | Operate on level ground, ensure hitch is securely attached |
7. Storage
The Brinly Lawn Sweeper is designed for convenient upright storage, minimizing its footprint when not in use.
- Clean Before Storage: Ensure the sweeper is clean and dry before storing to prevent rust and mildew.
- Upright Position: Collapse the hamper and position the sweeper vertically for compact storage.
- Protected Area: Store in a dry, covered area to protect from elements.
Figure 5: The Brinly Lawn Sweeper folded into its upright storage configuration.
8. Specifications
- Brand: Brinly
- Model Number: LS2-42BH-GA
- Power Source: Rider Mower
- Material: Metal
- Color: Hammered Black
- Item Weight: 68 Pounds
- Cutting Width: 42 Inches
- Operation Mode: Manual (tow-behind)
- Product Dimensions: 69"D x 53"W x 38"H
- Assembly Required: Yes
9. Warranty and Support
For warranty information, product support, or to purchase replacement parts, please contact Brinly customer service or visit the official Brinly website. Keep your purchase receipt for warranty claims.
