Introduction
Thank you for purchasing the KCO Modern Green Glass Pendant Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before installation and retain them for future reference.
Image 1: KCO Modern Green Glass Pendant Light, showcasing its design and green glass shade.
Important Safety Information
- WARNING: To avoid electric shock, ensure power is turned off at the circuit breaker before installation or servicing.
- All wiring connections must be made in accordance with local and national electrical codes. If you are unsure about wiring, consult a qualified electrician.
- Do not exceed the recommended wattage for the light bulb. Refer to the specifications section for bulb requirements.
- Handle glass components with care to prevent breakage and injury.
- This fixture is designed for indoor use only. Do not expose to moisture or outdoor elements.
What's in the Box
Carefully unpack all components and check against the list below. If any parts are missing or damaged, please contact KCO Lighting customer support.
- Pendant Light Fixture (with green glass shade)
- Mounting Hardware (screws, wire nuts, mounting bracket)
- Bulb (E26 base) - Note: Bulb type may vary.
- Instruction Manual (this document)
Setup and Installation
- Turn Off Power: Before beginning installation, ensure the power supply to the junction box is turned off at the circuit breaker.
- Prepare Mounting: Attach the mounting bracket to the ceiling junction box using the provided screws. Ensure it is securely fastened.
- Adjust Cord Length: The pendant light features an adjustable hanging cord (up to 59.1 inches / 150 cm). Adjust the cord to your desired length by pushing the cord into the canopy or pulling it out. Secure the cord in place within the canopy mechanism.
- Wiring Connections:
- Connect the fixture's ground wire (usually bare copper or green) to the ground wire from the junction box.
- Connect the fixture's neutral wire (usually white) to the neutral wire from the junction box.
- Connect the fixture's hot wire (usually black) to the hot wire from the junction box.
- Secure all connections with wire nuts and ensure no bare wires are exposed.
- Mount Fixture: Carefully tuck all wires into the junction box. Align the fixture's canopy with the mounting bracket and secure it with the provided screws or nuts.
- Install Bulb: Screw an E26 base bulb (max 60W, LED recommended) into the socket. Do not overtighten.
- Restore Power: Once installation is complete and all connections are secure, restore power at the circuit breaker.
Image 2: Detailed dimensions of the pendant light, including adjustable cord length and E26 bulb base type.
Image 3: Example of the pendant light installed in various indoor settings.
Operating Instructions
The KCO Modern Green Glass Pendant Light is designed for simple operation.
- Power On/Off: Control the light using a standard wall switch connected to the fixture's circuit.
- Bulb Replacement: To replace the bulb, ensure power is off at the circuit breaker. Allow the bulb to cool completely before unscrewing it. Install a new E26 base bulb, ensuring it meets the wattage requirements (max 60W).
- App Control: While the fixture itself does not include integrated app control, it is compatible with smart E26 bulbs and smart home systems that allow for app-based control of lighting circuits.
Maintenance
- Cleaning: To clean the fixture, turn off the power and allow it to cool. Wipe the metal parts with a soft, dry cloth. For the glass shade, use a soft, damp cloth with a mild glass cleaner if necessary, then dry thoroughly. Do not use abrasive cleaners or solvents.
- Periodic Checks: Periodically inspect the wiring and connections for any signs of wear or damage. Ensure all mounting screws remain tight.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light flickers. |
|
|
Specifications
| Feature | Detail |
|---|---|
| Brand | KCO |
| Model Number | L7138 |
| Color | Green |
| Material | Metal, Glass |
| Light Fixture Form | Pendant |
| Room Type | Kitchen, Dining Room, Bedroom, Living Room |
| Indoor/Outdoor Usage | Indoor |
| Power Source | Corded Electric |
| Installation Type | Ceiling Mount |
| Light Source Type | LED (compatible) |
| Shade Material | Glass |
| Number of Light Sources | 1 (for this pendant light model) |
| Voltage | 110-240V |
| Bulb Base | E26 Medium |
| Wattage | Max 60W (per bulb) |
| Brightness | 800 lumen (typical for recommended LED bulb) |
| Dimensions (Fixture) | Width: 7.9" (20cm), Height: 11.8" (30cm) |
| Hanging Cord Length | Adjustable up to 59.1" (150cm) |
| Ceiling Canopy Diameter | 4.7" (12cm) |
| Assembly Required | No (minor assembly for installation) |
Warranty and Support
KCO Lighting offers a 3-year after-sales service for this product.
If you encounter any issues such as broken, damaged, or cracked glass shades, or missing parts, please contact KCO Lighting directly. To facilitate prompt service, please provide your order number when contacting support.
For support, please refer to your purchase platform or the KCO Lighting official store for contact information.