1. Introduction
The 1Mii SafeFly Dot is a versatile Bluetooth 5.3 transmitter and receiver designed to enhance your audio experience across various devices. This 2-in-1 adapter allows you to wirelessly stream audio from non-Bluetooth sources to your Bluetooth headphones or speakers (Transmitter Mode), or connect your smartphone to wired audio systems via Bluetooth (Receiver Mode). Its compact design, long battery life, and support for multiple audio codecs make it ideal for travel, home entertainment, and daily use.
Figure 1: 1Mii SafeFly Dot Bluetooth Transmitter Receiver.
2. Safety Information
Please read and follow these safety guidelines to ensure proper and safe use of your 1Mii SafeFly Dot:
- Do not expose the device to excessive heat or direct sunlight.
- Avoid exposing the device to moisture, water, or other liquids.
- Do not dispose of the device in fire.
- Do not attempt to disassemble, repair, or modify the device. This will void the warranty.
- Keep out of reach of children.
3. Package Contents
Verify that all items are present in your package:
- 1Mii SafeFly Dot Bluetooth Transmitter Receiver
- USB-C Charging Cable
- 3.5mm Audio Female Plug (Adapter)
- Dual 3.5mm Male to Female Adapter (Airplane Adapter)
- Audio Plug Protector / Keychain
- User Manual
Figure 2: All items included in the 1Mii SafeFly Dot package.
4. Product Features
- Bluetooth 5.3 Technology: Supports 6 decoding formats including SBC, AAC, aptX, aptX-Low Latency, aptX-HD, and aptX-Adaptive for broad compatibility and high-quality audio.
- Intuitive Indicator Panel: Clear light effects indicate connection mode, audio codec, paired devices, and battery level.
- Compact and Portable: Lightweight design, ideal for travel, includes a two-prong airplane adapter.
- aptX Low Latency: Ensures synchronized audio and video, perfect for gaming, binge-watching, and video viewing.
- 2-in-1 Transmitter/Receiver:
- TX Mode (Transmitter): Wirelessly streams audio from non-Bluetooth devices (TVs, computers, flight entertainment, gym equipment) to Bluetooth headphones or speakers.
- RX Mode (Receiver): Connects your smartphone to wired headphones, speakers, car stereo, or home stereo via Bluetooth.
- Built-in Microphone: Supports hands-free calling in RX mode (not supported in TX mode).
- Long Battery Life: Up to 25 hours of continuous music playback on a 2-hour charge. Can be used while charging.
- Volume Control: Easily adjust audio volume directly on the device.
5. Product Diagram and Controls
Familiarize yourself with the various parts and controls of your SafeFly Dot:
Figure 3: Detailed product diagram showing controls and ports.
- Flexible Audio Cable: 3.5mm audio connection.
- P/R Button: Pair / Reset button.
- TX/OFF/RX Switch: Selects Transmitter mode, turns off the device, or selects Receiver mode.
- Battery Indicator: Shows current battery level.
- Device A/B Indicators: Show connection status for two paired devices.
- Mode Indicators (RX/TX): Indicate current operating mode.
- Codec Indicators (APTX, LL, HD, AD, AAC, SBC): Show the active audio codec.
- '+' Button: Volume up / Next track.
- '-' Button: Volume down / Previous track.
- 'M' Button: Multi-function button (e.g., play/pause, answer/end call).
- Microphone: For hands-free calls in RX mode.
- Type-C Charging Port: For charging the device.
6. Setup and Operation
6.1. Charging the Device
Before first use, fully charge your SafeFly Dot. Connect the provided USB-C charging cable to the device's Type-C port and the other end to a USB power source (e.g., wall adapter, computer USB port). The battery indicator lights will show charging progress.
Figure 4: The SafeFly Dot offers up to 25 hours of battery life and can be charged via USB-C.
6.2. Transmitter Mode (TX)
In TX mode, the SafeFly Dot transmits audio from non-Bluetooth devices to your Bluetooth headphones or speakers.
Figure 5: Visual representation of Transmitter (TX) and Receiver (RX) modes.
- Switch to TX Mode: Slide the TX/OFF/RX switch to the 'TX' position. The TX LED will flash red and blue, indicating it's in pairing mode.
- Connect to Audio Source: Plug the 3.5mm audio cable of the SafeFly Dot into the audio output jack of your non-Bluetooth device (e.g., airplane entertainment system, TV, computer, gym equipment). If needed, use the dual 3.5mm male to female adapter for airplane seats.
- Pair with Bluetooth Headphones/Speakers: Set your Bluetooth headphones or speakers to pairing mode. Place them close to the SafeFly Dot. The SafeFly Dot will automatically search and connect. Once connected, the TX LED will turn solid blue, and either the 'A' or 'B' indicator will light up.
- Dual Connection (TX Mode): To connect a second pair of Bluetooth headphones/speakers, ensure the first device is connected. Then, put the second device into pairing mode and press the 'P/R' button on the SafeFly Dot for 2 seconds. The TX LED will flash red and blue again. Once connected, both 'A' and 'B' indicators will be solid blue.
Figure 6: Using the SafeFly Dot to stream audio from an in-flight entertainment system.
Figure 7: Instructions for pairing your Bluetooth headset in TX mode.
Figure 8: Instructions for connecting a second Bluetooth headset in TX mode.
Figure 9: Example of dual connection for shared audio experience.
6.3. Receiver Mode (RX)
In RX mode, the SafeFly Dot receives audio from your Bluetooth-enabled smartphone or tablet and plays it through wired headphones or speakers.
- Switch to RX Mode: Slide the TX/OFF/RX switch to the 'RX' position. The RX LED will flash red and blue, indicating it's in pairing mode.
- Connect to Audio Output Device: Plug the 3.5mm audio cable of the SafeFly Dot into the audio input jack of your wired headphones, car stereo, or home stereo system.
- Pair with Smartphone/Tablet: On your smartphone or tablet, enable Bluetooth and search for 'SafeFly Dot' in the list of available devices. Select it to connect. Once connected, the RX LED will turn solid blue, and either the 'A' or 'B' indicator will light up.
- Dual Connection (RX Mode): To connect a second smartphone/tablet, ensure the first device is connected. Then, put the second device into Bluetooth pairing mode and press the 'P/R' button on the SafeFly Dot for 2 seconds. The RX LED will flash red and blue again. Once connected, both 'A' and 'B' indicators will be solid blue.
Figure 10: The SafeFly Dot in RX mode, enabling hands-free calls in a car.
Figure 11: Instructions for pairing your smartphone in RX mode.
Figure 12: Instructions for connecting a second smartphone in RX mode.
6.4. Volume Control
Use the '+' and '-' buttons on the SafeFly Dot to adjust the audio volume. Press '+' to increase volume and '-' to decrease volume.
6.5. Built-in Microphone (RX Mode Only)
When in RX mode and connected to your smartphone, the built-in microphone allows for hands-free calling. Press the 'M' button to answer or end a call. Note that the microphone function is not available in TX mode.
6.6. Official Product Video
Watch this official video for a visual guide on how to use the 1Mii SafeFly Dot, particularly for connecting two headphones to an airplane entertainment system.
Video 1: 1Mii Bluetooth Airplane Adapter for 2 AirPods or Headphones. This video demonstrates the setup and use of the SafeFly Dot in an airplane environment, highlighting its ability to connect to two wireless headphones simultaneously.
7. Specifications
| Feature | Description |
|---|---|
| Model Number | SafeFly Dot |
| Bluetooth Version | 5.3 |
| Supported Codecs | SBC, AAC, aptX, aptX-Low Latency, aptX-HD, aptX-Adaptive |
| Operating Modes | Transmitter (TX) and Receiver (RX) |
| Connectivity Technology | AUX (3.5mm) |
| Power Source | Battery Powered (Built-in rechargeable battery) |
| Battery Life | Up to 25 hours |
| Charging Time | Approximately 2 hours |
| Product Dimensions | 2.17 x 1.26 x 0.51 inches (5.5 x 3.2 x 1.3 cm) |
| Item Weight | 2.46 ounces (70 grams) |
| Special Features | Built-In Microphone (RX mode), Hands-free Call (RX mode), Volume Control, Dual Connection |
8. Troubleshooting
If you encounter issues with your 1Mii SafeFly Dot, please refer to the following common solutions:
- Device not turning on: Ensure the device is charged. Connect it to a power source using the USB-C cable.
- Cannot pair with Bluetooth device:
- Ensure the SafeFly Dot is in the correct TX or RX mode.
- Make sure your Bluetooth headphones/speakers/smartphone are in pairing mode.
- Place devices close to each other (within 1 meter).
- Clear previous pairing records on both the SafeFly Dot (press and hold P/R button for 5 seconds to reset) and your Bluetooth device.
- Restart both devices.
- No sound or low volume:
- Check if the SafeFly Dot is properly connected to the audio source/output device.
- Adjust the volume on both the SafeFly Dot and the connected audio device/headphones.
- Ensure the correct audio output is selected on your source device (e.g., TV).
- Audio delay (latency): Ensure both the SafeFly Dot and your connected Bluetooth device support aptX Low Latency (aptX-LL) for minimal delay.
- Microphone not working (TX mode): The built-in microphone only functions in RX mode for hands-free calling. It is not active in TX mode.
9. Warranty and Support
1Mii products come with a standard warranty. For detailed warranty information, technical support, or service inquiries, please refer to the warranty card included in your package or visit the official 1Mii website. You can also contact 1Mii customer support directly through their provided contact channels.
Please retain your proof of purchase for warranty claims.
