Introduction
Thank you for choosing the FOOWIN 48,000 BTU Outdoor Propane Patio Heater. This pyramid-style heater is designed to provide efficient and comfortable warmth for your outdoor spaces, such as patios, backyards, gardens, and decks. Its elegant design and powerful heat output make it an ideal addition for creating a cozy ambiance. Please read this manual thoroughly before assembly, operation, or maintenance to ensure safe and optimal performance.
Image: The FOOWIN Pyramid Patio Heater in silver grey, shown alongside its waterproof cover.
Safety Information
Your safety is paramount. This heater is designed with multiple safety features, but proper handling and adherence to these guidelines are essential to prevent accidents.
- Outdoor Use Only: This appliance is strictly for outdoor use and should not be operated indoors or in enclosed areas.
- Clearance: Maintain adequate clearance from combustible materials. Refer to the specifications section for exact distances.
- Ventilation: Ensure proper ventilation around the heater during operation.
- Tip-Over Protection: The heater is equipped with an auto-shutoff function that activates if the device tilts more than 45 degrees.
- Flame-Out Protection: Designed to automatically turn off the flame if it extinguishes unexpectedly.
- Gas Leaks: Always check for gas leaks using a soapy water solution before each use. Never use an open flame to check for leaks.
- Children and Pets: Keep children and pets at a safe distance from the heater, especially during operation.
- Hot Surfaces: The heater's surfaces become extremely hot during use. Avoid direct contact.
- Propane Tank: Use only approved propane tanks (LPG cylinder) with the correct specifications. Ensure the tank is securely placed within the base.
Image: Illustration of the patio heater's safety protection system, showing how it automatically shuts off when tilted beyond 45 degrees, along with icons for Anoxic Protect, Tip-over Protection, and Flame-out Protection.
Package Contents
Before beginning assembly, please ensure all parts are present and undamaged. If any parts are missing or damaged, do not attempt to assemble or operate the heater. Contact customer support immediately.
- 1 x FOOWIN Propane Patio Heater (Main Unit)
- 1 x Waterproof Cover
- 1 x Pair of Operating Gloves
- 1 x User Manual (this document)
- Assembly Hardware (screws, nuts, washers, etc.)
- Tools for Assembly (usually a wrench and screwdriver)
Assembly Instructions
Assembly typically takes approximately 50 minutes. It is recommended to have two people for certain steps. Follow these steps carefully.
- Unpack Components: Carefully remove all parts from the packaging. Lay them out on a clean, flat surface to identify each component.
- Assemble Base: Attach the base panels together using the provided screws and nuts. Ensure the wheel assembly is correctly oriented.
- Install Wheels: Securely attach the integrated casters to the base. These wheels allow for smooth movement of the heater.
Image: Detail showing the integrated casters at the base of the heater, illustrating how they facilitate smooth movement.
- Attach Main Body: Connect the main body frame to the assembled base.
- Insert Quartz Glass Tube: Carefully slide the quartz glass tube into its designated position within the heater's frame. Handle with care to avoid breakage.
Image: A close-up view of the durable and corrosion-resistant quartz glass flame tube, which maintains a beautiful flame.
- Install Protective Nets: Secure the protective nets around the glass tube.
- Mount Reflector: Attach the top reflector assembly to the upper part of the heater.
Image: A close-up view of the top protection net cover design, which helps circulate hot air and prevents rainwater infiltration.
- Connect Gas Hose: Connect the gas hose from the heater to the regulator. Ensure all connections are tight.
- Leak Test: Before connecting the propane tank, perform a leak test on all gas connections using a soapy water solution. Bubbles indicate a leak. Tighten connections or replace parts as necessary.
Operating Instructions
Follow these steps to safely operate your FOOWIN Patio Heater.
- Place Propane Tank: Open the magnetic door on the base of the heater. Place a standard 20 lb propane tank (not included) inside the tank compartment.
Image: A close-up view of the magnetic door design, providing easy access for propane tank changes.
- Connect Propane Tank: Connect the regulator hose to the propane tank valve. Hand-tighten firmly.
- Open Gas Valve: Slowly turn the propane tank valve counter-clockwise to the fully open position.
- Ignition:
- Locate the igniter button and control knob on the heater's control panel.
- Push and hold the control knob in the "PILOT" position.
- While holding the knob, press the igniter button repeatedly until the pilot flame ignites. You should see a small flame.
- Continue to hold the control knob for 15-30 seconds after ignition to allow the thermocouple to heat up.
- Release the control knob. If the pilot flame goes out, repeat the ignition process.
Image: A close-up view of the one-step ignition system, showing the igniter button and control knob for adjusting temperature.
- Main Burner Operation: Once the pilot flame is stable, turn the control knob to the "LOW" position, then slowly rotate it counter-clockwise to the desired heat setting (LOW to HIGH). The main burner flame will ignite.
- Adjust Heat: Adjust the control knob to achieve the desired heat output. The heater provides 48,000 BTU of heat, spreading warmth evenly within approximately 130 square feet.
Image: Visual representation of the heater's powerful 48,000 BTU heat output, highlighting faster heating and 360-degree continuous heating capabilities.
- To Turn Off: Turn the control knob to the "OFF" position. Close the valve on the propane tank.
Maintenance
Regular maintenance ensures the longevity and safe operation of your patio heater.
- Cleaning:
- Ensure the heater is completely cool before cleaning.
- Wipe exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Clean the reflector and glass tube periodically to maintain optimal heat reflection and flame visibility.
- Storage:
- Disconnect the propane tank and store it in a well-ventilated area, away from direct sunlight and heat sources.
- Cover the heater with the provided waterproof cover to protect it from elements when not in use for extended periods.
- Store the heater in a cool, dry place.
- Inspections:
- Regularly inspect the gas hose for cracks, cuts, or excessive wear. Replace if damaged.
- Check all connections for tightness periodically.
Troubleshooting
If you encounter issues with your heater, refer to the following common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater will not ignite. |
|
|
| Pilot light goes out after releasing knob. |
|
|
| Low heat output. |
|
|
| Heater shuts off unexpectedly. |
|
|
If the problem persists after trying these solutions, please contact FOOWIN customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | FOOWIN |
| Model Number | cf5f045a-7aa8-4d4e-a532-b7682feae042 |
| Heat Output | 48,000 BTU |
| Heating Coverage | Approx. 130 square feet |
| Fuel Type | Propane |
| Ignition Type | One-touch ignition system |
| Safety Features | Tip-Over Protection (45 degrees), Flame-Out Protection, Anoxic Protect |
| Material | High-quality aluminum and stainless steel, Quartz glass tube |
| Mobility | Built-in wheels |
| Color | Silver Grey |
| UPC | 783296946329 |
Image: A diagram illustrating the product dimensions, including reflector size, base size, and overall height (89.37 inches).
Warranty and Support
FOOWIN offers a Lifetime Warranty Service for this product. Each part and detail has undergone quality control to ensure your satisfaction.
If you have any problems when using our product, please feel free to contact us. Our 24-hour after-sales service team is available to assist you.
For support, please visit the FOOWIN Store on Amazon or contact us through your purchase platform.
