Introduction
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your MageGee LIGHT87 Wireless Mechanical Keyboard. Please read this manual thoroughly to ensure proper use and to maximize the performance and lifespan of your device.
Setup
Package Contents
Before beginning, ensure all items are present in the package:
- MageGee LIGHT87 Wireless Mechanical Keyboard
- USB Type-C Cable
- 2.4GHz USB Receiver
- Keycap Puller / Switch Puller Tool
- User Manual (this document)
Image: Included accessories for the MageGee LIGHT87 keyboard.
Connection Modes
The MageGee LIGHT87 keyboard supports three connection modes: USB Type-C Wired, 2.4GHz Wireless, and Bluetooth 5.0.
Image: Overview of the three available connection methods.
1. USB Type-C Wired Connection
- Connect the provided USB Type-C cable to the keyboard's Type-C port.
- Connect the other end of the cable to an available USB port on your computer.
- The keyboard will automatically switch to wired mode.
2. 2.4GHz Wireless Connection
- Locate the 2.4GHz USB receiver in the package.
- Insert the USB receiver into an available USB port on your computer.
- On the keyboard, press Fn + 4 to switch to 2.4GHz wireless mode. The indicator light will confirm the connection.
3. Bluetooth 5.0 Connection
The keyboard can connect to up to three Bluetooth devices.
- On the keyboard, press Fn + 1, Fn + 2, or Fn + 3 to select a Bluetooth channel. The indicator light will blink, indicating pairing mode.
- On your device (PC, laptop, tablet, smartphone), enable Bluetooth and search for available devices.
- Select "MageGee LIGHT87" from the list of devices to pair.
- Once paired, the indicator light will become solid. Repeat for other devices on different channels.
Image: Detailed instructions for switching between 2.4GHz, Bluetooth, and wired modes.
Operating Instructions
RGB Backlight Control
The MageGee LIGHT87 keyboard features 16.8 million colors and various dynamic RGB backlight effects.
- Press Fn + Enter to cycle through approximately 20 different backlight modes.
- Press Fn + ← or Fn + → to adjust the backlight color.
- Press Fn + ↑ or Fn + ↓ to adjust the backlight brightness.
- Press Fn + =+ or Fn + _- to adjust the backlight speed for dynamic effects.
Image: RGB backlight control functions.
Image: Table of RGB backlight control key combinations.
Hot-Swappable Switches
The keyboard features hot-swappable sockets, allowing you to change switches without soldering. It supports both 3-pin and 5-pin mechanical switches.
Image: Hot-swappable switch compatibility and type.
Battery Management
The keyboard is equipped with an 8000mAh large-capacity battery. Battery life varies based on usage and backlight settings.
- Approximate battery life with RGB backlight ON: 53 hours.
- Approximate battery life with RGB backlight OFF: 400 hours.
- Sleep standby time: 450 hours.
- To charge, connect the keyboard using the USB Type-C cable to a power source.
Image: Battery capacity and estimated usage times.
Image: Battery life details for various modes.
Win/Mac Dual System Support
The keyboard supports both Windows and macOS operating systems. Specific key functions may adapt automatically or require manual switching depending on the system.
Maintenance
Cleaning the Keyboard
To maintain optimal performance and appearance, regular cleaning is recommended.
- Disconnect the keyboard from all power sources before cleaning.
- Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution to wipe the keycaps and chassis.
- For dust and debris between keycaps, use compressed air or a small brush.
- Avoid using harsh chemicals or abrasive materials, as these can damage the keyboard's finish.
Replacing Keycaps and Switches
The provided keycap and switch puller tool allows for easy replacement.
Image: Keycap removal process.
- Keycap Removal: Use the keycap puller to gently grip the keycap and pull upwards.
- Switch Removal: After removing the keycap, use the switch puller to grasp the top and bottom clips of the switch and pull upwards firmly but gently.
- Switch Installation: Align the pins of the new switch with the holes on the PCB. Press down firmly until the switch clicks into place. Ensure pins are not bent.
- Keycap Installation: Place the new keycap over the switch stem and press down until it is secure.
Troubleshooting
Keyboard Not Responding
- Wired Mode: Ensure the USB-C cable is securely connected to both the keyboard and the computer. Try a different USB port or cable.
- 2.4GHz Wireless Mode: Ensure the USB receiver is properly inserted and the keyboard is set to 2.4GHz mode (Fn + 4). Try re-pairing by unplugging and re-plugging the receiver.
- Bluetooth Mode: Ensure Bluetooth is enabled on your device and the keyboard is paired to the correct channel (Fn + 1/2/3). Try unpairing and re-pairing the device.
- Battery: Check if the keyboard battery is charged. Connect the USB-C cable to charge.
Double Key Presses or Unresponsive Keys
- This can sometimes be caused by dust or debris under the switch. Try cleaning the affected switch area with compressed air.
- If the issue persists, the switch itself might be faulty. As the keyboard is hot-swappable, try replacing the problematic switch with a new one.
- Ensure the switch is fully seated in its socket.
RGB Backlight Not Working or Incorrect
- Ensure the backlight is turned on and brightness is not set to minimum (Fn + ↑).
- Cycle through different backlight modes using Fn + Enter.
- Check battery level, as low battery might affect backlight performance.
Specifications
| Brand | MageGee |
| Model | LIGHT87 |
| Keyboard Description | Mechanical |
| Connectivity Technology | Bluetooth 5.0, 2.4GHz Wireless, USB Type-C Wired |
| Compatible Devices | PC, Laptops, Tablets, Smartphones |
| Compatible Operating System | Windows, macOS |
| Special Feature | Hot-Swappable Switches, RGB Backlight, Gasket Structure |
| Switch Type | Linear (Blue Whale Switch) |
| Keycap Material | PBT Plastic |
| Battery Capacity | 8000mAh |
| Number of Keys | 87 |
| Anti-Ghosting | 100% Anti-Ghosting on all 87 keys |
| Enclosure Material | Silicone, PBT Plastic |
| Recommended Use | Gaming |
Warranty Information
The MageGee LIGHT87 Wireless Mechanical Keyboard comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.
Please retain your proof of purchase for warranty claims.
Customer Support
For further assistance, technical support, or warranty inquiries, please contact MageGee customer service through the retailer where the product was purchased or visit the official MageGee website for contact information.
Product Overview Video
Video: Official overview of the MageGee LIGHT87 Wireless Gasket Creamy Keyboard, highlighting its features and design.
