1. Introduction
Thank you for choosing the ASAHOM Permanent Outdoor Lights Pro. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your lighting system. Please read it thoroughly before use and retain it for future reference.
Image: The ASAHOM Permanent Outdoor Lights Pro packaging, remote control, and a close-up of the individual LED lights.
2. Safety Information
WARNING: Failure to follow these safety instructions may result in fire, electric shock, injury, or property damage.
- Always disconnect power before installation, maintenance, or troubleshooting.
- Ensure all connections are secure and waterproof, especially in outdoor environments.
- Do not install on rainy or hot days. Extreme temperatures or slippery conditions increase the risk of falls during installation.
- Operate the lights within the specified temperature range of -4°F to 113°F (-20°C to 45°C).
- Keep the power adapter and control box in a location protected from direct water exposure, despite their IP67 rating.
- Do not attempt to modify or repair the product. Contact customer support for assistance.
3. Package Contents
Verify that all items are present in your package:
- 200ft White Permanent Outdoor Lights (1 unit)
- 6ft Extension Cords (6 units)
- Signal Amplifier (2 units)
- Waterproof Wire Connector (1 unit)
- Adhesive (12 units)
- Screw Clips (60 units)
- Screw Pack (18 units)
- Remote Control (1 unit, AAA battery NOT included)
- T-splitter (1 unit)
- Driver Module (1 unit)
- Ruler (1 unit)
- User Manual (1 unit)
4. Setup and Installation
Follow these steps for proper installation of your ASAHOM Permanent Outdoor Lights Pro:
- Preparation: Disconnect the power. Clean the installation surface thoroughly with a tissue and alcohol to ensure optimal adhesion. Allow the surface to dry completely.
- Placement: Install the lights approximately 2-4 inches (5-10 cm) away from the wall surface, typically on eaves.
- Adhesion: Peel off the VHB gum sticker from the back of each light. Firmly press each light against the cleaned surface for about 8 seconds to ensure strong adhesion.
- Secure with Clips: Attach the provided screw clips to each LED light for additional security. Use the screw pack to fasten them.
- Connecting Light Segments: Splice light segments using the white waterproof connectors every 16.4ft (5m). Ensure the connections are tight and secure by screwing in the cap.
- Extension and Signal Amplification: If extending the light string beyond 150ft, the included driver module is required. For continuous connection of 4 pieces of 6ft extension cords, a signal amplifier needs to be connected before the first extension cord to ensure signal stability.
- Pre-Installation Test: Before final installation, test whether the lights function normally. This helps identify any issues before permanent mounting.
Image: Visual guide illustrating the step-by-step installation process, including cleaning, positioning, adhering, and connecting light segments.
Image: Illustration of the lights' modular design, highlighting their cuttable, spliceable, and extendable nature, along with the driver module.
5. Operating Instructions
Your ASAHOM Permanent Outdoor Lights Pro offers multiple control methods:
5.1 Smart Life App Control
Download the Smart Life app from your device's app store. Follow the in-app instructions to pair your lights. The app provides extensive features:
- 100 Scene Modes: Choose from a variety of preset lighting effects for any occasion.
- 16 Million Colors: Select any color from the spectrum.
- Individual LED Control: Adjust the color of each LED light independently.
- 10 Music Modes: Sync lights to music, with adjustable microphone sensitivity for real-time effects.
- DIY Function: Create and save your own custom lighting patterns.
- Timer Function: Schedule lights to turn on/off at specific times.
- Adjustable White Light: Dedicated warm white (2700K) and cool white (6500K) options for daily and accent lighting.
5.2 Remote Control
Use the included remote control for convenient access to various functions, including ON/OFF, brightness adjustment, color changes, and scene selection. Ensure AAA batteries are inserted (not included).
5.3 Control Box
The physical control box allows direct control over the entire light strand. You can change the color, adjust brightness, reset, and turn the lights ON/OFF without connecting to the app.
5.4 Voice Control
Pair your lights with Amazon Alexa or Google Assistant via the Smart Life app for hands-free voice control.
Image: Overview of the four control methods available for the lighting system: Smart Life App, Voice Devices (Alexa, Google Assistant), Control Box, and Remote Controller.
6. Maintenance
The ASAHOM Permanent Outdoor Lights Pro are designed for durability and minimal maintenance:
- Durability: Constructed with anti-UV material, these lights are built to withstand outdoor conditions.
- Lifespan: The LED lights have an estimated lifespan of up to 50,000 hours.
- Waterproof Rating: The LED lights, power adapter, and control box are all IP67 waterproof, providing protection against dust and temporary immersion in water.
- Cleaning: Periodically clean the light surfaces with a soft, damp cloth to remove dirt and debris. Ensure power is disconnected before cleaning.
- Connection Check: Regularly inspect all connections for tightness and ensure waterproof caps are securely fastened.
Image: Icons highlighting the product's robust features for outdoor environments, including UV resistance, long lifespan, and IP67 waterproofing for key components.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights do not turn on. | No power, loose connection, faulty power adapter. | Check power supply. Ensure all connections are secure. Test power adapter. |
| Lights flicker or some sections are off. | Poor connection, signal interference, insufficient power for extended length. | Verify all waterproof connectors are tight. Ensure 2.4G WiFi signal is strong. Use signal amplifier for lengths beyond 150ft. |
| App cannot connect to lights. | Incorrect Wi-Fi network (only 2.4G supported), incorrect pairing mode, app glitch. | Ensure your phone is connected to a 2.4G Wi-Fi network. Reset the lights to pairing mode. Restart the Smart Life app. |
| Lights fall off after installation. | Improper surface preparation, insufficient pressure during adhesion, clips not used. | Ensure surface is clean and dry before applying adhesive. Apply firm pressure for 8 seconds. Use all provided screw clips for added security. |
| Remote control not working. | No batteries, dead batteries, remote not paired. | Insert AAA batteries. Replace old batteries. Follow instructions to pair the remote with the control box. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | S106D |
| Light Type | RGBCW LED (5-in-1 RGB+WW+CW) |
| Number of Lights | 144 |
| Total Length | 200ft (extendable, max 200ft) |
| Brightness | Up to 60lm per light (4000K white) |
| Color Temperature | 2700K-6500K (adjustable white) |
| Waterproof Rating | IP67 (LEDs, power adapter, control box) |
| Operating Temperature | -4°F to 113°F (-20°C to 45°C) |
| Lifespan | 50,000 hours |
| Control Methods | Smart Life App, Remote Control, Control Box, Voice Control (Alexa, Google Assistant) |
| Voltage | 36 Volts (DC) |
| Wattage | 120 watts |
9. Warranty and Support
ASAHOM provides a 3-year warranty for its Permanent Outdoor Lights Pro. For warranty claims, technical support, or any inquiries regarding your product, please contact ASAHOM customer service through the retailer's platform or the official ASAHOM website. Please have your purchase details and model number (S106D) ready when contacting support.
