1. Introduction
Thank you for choosing the WantJoin Hot Dog Steamer and Bun Warmer. This 2-tier electric steamer is designed to efficiently heat and keep hot dogs and buns warm, making it ideal for various commercial and home settings. This manual provides essential information for safe operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your appliance.
2. Important Safety Instructions
- Read all instructions before using the appliance.
- Ensure the appliance is connected to a grounded power outlet (110-120V).
- Do not immerse the appliance, cord, or plug in water or other liquids.
- Always unplug the appliance from the outlet when not in use and before cleaning.
- Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner.
- Keep hands and utensils away from heating elements during operation to prevent injury.
- Use only accessories recommended by the manufacturer.
- Do not use outdoors.
- Always ensure the water tank has sufficient water before turning on the heating function to prevent dry-burning. The appliance features a low-water notice function and automatic power cut-off.
- Exercise extreme caution when moving an appliance containing hot oil or other hot liquids.
- Do not use the appliance for other than intended use.
3. Product Overview and Components
The WantJoin Hot Dog Steamer is constructed with a durable stainless steel housing and features a visible glass sliding door for easy access and display. It includes a 2-tier design for separate heating of hot dogs and buns.
Key Components:
- Stainless Steel Base: Houses the heating elements and control panel.
- Water Tank: 7L capacity with MAX water level line for steam generation. Features low-water notice and auto shut-off.
- Control Panel: Includes temperature control knob (86°F-230°F / 30°C-110°C), power switch, and water shortage indicator light.
- 2-Tier Warming Cabinet: Upper tier for buns (26-40 6" buns), lower tier for hot dogs (150-175 4.8" hot dogs).
- Tempered Glass Sliding Door: Provides visibility and easy access to food.
- Drain Valve: Located at the bottom for easy water drainage after use.
- Accessories: Stainless steel tong, L-shaped stainless steel plates, intermediate plate, faucet, telephone tape, accessory bag.
Figure 1: Front view of the WantJoin Hot Dog Steamer, showcasing its two-tier design with hot dogs and buns ready for serving.
Figure 2: Detailed view of the WantJoin Hot Dog Steamer highlighting its commercial two-tier design, voltage, power, capacity, and temperature range.
4. Setup and Assembly
Follow these steps to assemble your WantJoin Hot Dog Steamer:
- Install Side Panels: Attach the two stainless steel side panels to both sides of the base using the provided screws.
- Insert Tempered Glass: Place the tempered glass panel into the back slot of the steamer.
- Attach Roof: Secure the triangular stainless steel roof to the top of the unit using screws.
- Place L-shaped Plates: Insert the two L-shaped stainless steel plates onto the first layer of the insulated cabinet.
- Align Middle Partition: Align the middle partition with the groove inside the cabinet.
- Install Faucet: Wrap the faucet with the provided telephone tape and install it onto the hot dog steamer's water outlet.
- Secure Side Panels: Secure the stainless steel side panels with screws.
- Hang Tong: Hang the provided tong on the side hook for easy access.
Video 1: This video demonstrates the step-by-step assembly process for the WantJoin Hot Dog Steamer, including attaching side panels, roof, internal plates, and the faucet.
5. Operating Instructions
Operating your hot dog steamer is straightforward:
- Add Water: Open the dust cover on the water inlet and pour water into the tank up to the MAX level line. The 7L water tank ensures prolonged steaming without frequent refills.
- Load Food: Place hot dogs in the lower tier and buns in the upper tier of the warming cabinet. The steamer can hold approximately 150-175 hot dogs and 26-40 buns.
- Power On and Set Temperature: Plug in the appliance. Turn the power switch ON. Adjust the temperature control knob to your desired setting between 86°F-230°F (30°C-110°C). The real-time temperature display will show the current temperature.
- Monitor Water Level: The low-water notice function will alert you if the water level is too low, and the machine will automatically cut off power to prevent dry-burning. Add water as needed.
- Serve: Once hot dogs and buns are heated to your preference, use the provided tong to serve.
Figure 3: Illustration of the 7L water tank, steam vent, and dry-burning prevention system, showing how to add water and the low water level indicator.
Figure 4: Close-up of the user-friendly control panel, featuring the temperature indication, temperature knob, low water level light, and on/off switch.
Video 2: This video demonstrates the operation of the WantJoin Hot Dog Steamer, including adding water, loading hot dogs and buns, and adjusting the temperature.
6. Maintenance and Cleaning
Regular cleaning and maintenance will extend the life of your hot dog steamer.
- Unplug and Cool: Always unplug the appliance and allow it to cool completely before cleaning.
- Drain Water: Open the drain valve at the bottom to empty any remaining water from the tank.
- Remove Components: The food trays and glass doors can be removed directly for easy cleaning.
- Clean Surfaces: Wipe down all stainless steel surfaces and glass panels with a damp cloth and mild detergent. Avoid abrasive cleaners or scouring pads that could scratch the surface.
- Rinse and Dry: Rinse all removable parts thoroughly with clean water and dry completely before reassembly or storage.
Figure 5: Close-up of the water level guide and dry-burning prevention features, emphasizing the importance of maintaining proper water levels.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Appliance does not turn on. | Not plugged in, power switch off, or low water level. | Ensure plug is securely in outlet, turn power switch ON, check water level and add water if necessary. |
| Hot dogs/buns not heating sufficiently. | Temperature setting too low, insufficient water for steam, or lid not properly closed. | Increase temperature setting, ensure water tank is filled to MAX, check that the glass door is closed. |
| Water shortage indicator light is on. | Water level in the tank is below the minimum. | Add water to the tank up to the MAX level. The heating will resume automatically. |
| Excessive condensation inside. | Normal operation for a steamer. | This is normal. Ensure proper ventilation around the unit. |
8. Specifications
- Brand: WantJoin
- Model: Hot Dog Steamer
- Material: Stainless Steel
- Color: Yellow
- Capacity: 27 Liters (24.52 QT)
- Hot Dog Capacity: 150-175 (4.8" long)
- Bun Capacity: 26-40 (6" long)
- Product Dimensions: 14.96"L x 13.39"W x 21.26"H
- Item Weight: 28.9 pounds
- Is Electric: Yes
- Voltage: 110-120V
- Power: 1200W
- Temperature Range: 86°F-230°F (30°C-110°C)
9. Warranty and Support
WantJoin provides professional after-sales one-to-one technical support. For any questions or assistance, please contact WantJoin customer service directly. Refer to your purchase documentation for specific warranty details.
