Smart FENDEE Walnut Fluted Nightstand (2-Drawer) Instruction Manual

Introduction

Thank you for choosing the Smart FENDEE Walnut Fluted Nightstand. This manual provides detailed instructions for assembly, safe use, and maintenance of your new furniture. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Safety Information

• Always assemble furniture according to the instructions provided.
• Do not exceed the maximum weight recommendation of 20 kilograms (approximately 44 lbs) for the top surface.
• Ensure the nightstand is stable and secure before use to prevent tipping or collapse.
• Keep small parts and packaging materials away from children during assembly.
• Use on a flat, stable surface.

Package Contents

Before assembly, please verify that all parts and hardware are present. If any items are missing or damaged, please contact customer support.

Parts List:

• Top Panel (1)
• Side Panels (2, 3)
• Back Panel (4)
• Bottom Panel (5)
• Drawer Front (6)
• Drawer Sides (7, 8)
• Drawer Back (9)
• Drawer Bottom (10)

Hardware List:

• Cam Locks (B)
• Cam Screws (A)
• Wood Dowels (D)
• Screws (C, E, F)
• Drawer Slides (CL, CR, DR, DL)
• Legs (G)
• Handle (L)
• Handle Screws (K)
• Back Panel Nails (M)
• Anti-tip Kit (N)

Assembly Instructions

Assembly is required. It is recommended to have a Phillips head screwdriver and a flat, clean surface for assembly. Follow the steps below or refer to the assembly video for visual guidance.

Assembly Video:

Step-by-Step Guide:

1. Prepare Side Panels: Attach the drawer slides (CL, CR) to the side panels (2, 3) using screws (C). Ensure they are oriented correctly for left and right sides.
2. Assemble Main Frame (Bottom): Connect the side panels (2, 3) to the bottom panel (5) using cam screws (A) and wood dowels (D). Secure with cam locks (B).
3. Attach Top Panel: Place the top panel (1) onto the assembled frame, aligning the holes. Secure it using wood dowels (D) and screws (E).
4. Install Legs: Turn the nightstand upside down. Attach the four legs (G) to the bottom panel using screws (F).
5. Attach Back Panel: Position the back panel (4) onto the rear of the nightstand and secure it with nails (M).
6. Assemble Drawer:
   • Attach drawer slides (DR, DL) to the drawer sides (7, 8) using screws (C).
   • Connect the drawer sides (7, 8) to the drawer back (9) and drawer front (6) using cam screws (A) and cam locks (B).
   • Slide the drawer bottom (10) into the grooves.
   • Attach the handle (L) to the drawer front (6) using screws (K).
7. Insert Drawer: Carefully align the assembled drawer with the drawer slides in the main nightstand frame and push it in until it clicks into place.
8. Install Anti-tip Kit: For safety, attach the anti-tip kit (N) to the back of the nightstand and to a wall stud, following the specific instructions provided with the kit.

Image showing the Smart FENDEE Walnut Fluted Nightstand with its overall dimensions: 15.75"D x 17.72"W x 20.86"H. The image also indicates the maximum load capacity for the top (20 lbs) and each drawer (10 lbs).

Close-up image highlighting the smooth gliding drawer mechanism and the distinctive slatted design of the drawer front on the Smart FENDEE Walnut Fluted Nightstand.

Operating Instructions

The Smart FENDEE Walnut Fluted Nightstand is designed for convenient storage and display.

• Drawers: The two drawers feature a smooth gliding mechanism. To open, gently pull the handle. To close, push firmly until the drawer is fully seated. Avoid forcing the drawers.
• Top Surface: Use the top surface for lamps, books, or decorative items. Do not exceed the maximum weight capacity of 20 lbs.
• Open Shelf: The open shelf provides additional storage or display space for easily accessible items.

Image demonstrating the ample storage space within the drawer of the Smart FENDEE Walnut Fluted Nightstand, with items placed inside.

Maintenance

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, which can damage the finish.
• Spills: Clean spills immediately to prevent staining. The surface is waterproof, but prolonged exposure to liquids should be avoided.
• Hardware: Periodically check all screws and fasteners to ensure they are tight. Retighten as necessary to maintain stability.
• Drawer Slides: If drawers become stiff or noisy, a small amount of silicone-based lubricant can be applied to the drawer slides.

Troubleshooting

Specifications

Warranty and Support

For warranty information, missing parts, or technical support, please contact Smart FENDEE customer service directly. Refer to your purchase documentation for specific contact details or visit the official Smart FENDEE store on Amazon: Smart FENDEE Store.