Introduction
The Lamzu Maya X Wireless Gaming Mouse is an ultra-lightweight peripheral designed for high-performance gaming. Weighing just 47g, it features optical switches, a maximum DPI of 30000, and a symmetrical design suitable for various grip styles. It incorporates a Nordic 52840 MCU for efficient power management and a PAW3950 sensor for precise tracking.
Package Contents
- Lamzu Maya X Wireless Gaming Mouse
- USB Wireless Receiver (Dongle)
- USB-C Charging Cable
- User Manual
- Additional Mouse Skates
Setup
1. Initial Charging
Before first use, connect the Lamzu Maya X mouse to a USB port on your computer using the provided USB-C cable. The mouse will begin charging. A full charge is recommended for optimal wireless performance.
2. Connecting the Mouse
Wireless Connection (2.4GHz)
- Insert the USB wireless receiver into an available USB port on your computer.
- Turn on the mouse using the power switch located on the underside.
- The mouse should automatically connect to the receiver. An indicator light on the mouse may confirm connection status.
Wired Connection (USB)
Connect the USB-C cable directly from the mouse to a USB port on your computer. The mouse will function in wired mode and charge simultaneously.
3. Software/Driver Installation
The Lamzu Maya X mouse utilizes a web-based configuration tool for settings adjustments and firmware updates. Access the official Lamzu website and navigate to the support or downloads section for the Maya X model to find the web-based driver or configuration utility. No traditional software installation is typically required.
Operating Instructions
Button Functions
- Left Click: Primary mouse button.
- Right Click: Secondary mouse button.
- Scroll Wheel: Scrolls content up/down. Can also be pressed for a middle-click function.
- Side Buttons: Typically assigned as Forward/Backward in web browsers or customizable in software.
- DPI Button: Cycles through preset DPI levels.
DPI Adjustment
The Lamzu Maya X supports a maximum DPI of 30000. DPI settings can be adjusted via the dedicated DPI button (if available) or through the web-based configuration tool. Refer to the online utility for precise DPI step customization.
Polling Rate
The mouse supports a maximum polling rate of 8,000 Hz when used with the optional 8K dongle. The polling rate can be configured via the web-based software.
Battery Management
The mouse is equipped with a rechargeable Lithium Ion battery. Battery status can be monitored through the web-based configuration tool. Recharge the mouse when the battery level is low to ensure uninterrupted use.
Maintenance
Cleaning
To clean the mouse, use a soft, dry, lint-free cloth. For stubborn dirt, a slightly damp cloth with a mild cleaning solution can be used, ensuring no liquid enters the mouse. Avoid abrasive cleaners or solvents. Regularly clean the sensor area to maintain tracking accuracy.
Storage
Store the mouse in a cool, dry place away from direct sunlight and extreme temperatures. When not in use for extended periods, ensure the mouse is fully charged before storage to preserve battery health.
Troubleshooting
- Mouse not responding:
- Ensure the mouse is charged.
- Verify the USB wireless receiver is securely plugged into a working USB port.
- Confirm the mouse is powered on.
- Try connecting the mouse via USB cable to check if it functions in wired mode.
- Re-pair the mouse with the receiver if applicable (refer to online software for pairing instructions).
- Intermittent connection:
- Move the receiver closer to the mouse.
- Avoid placing the receiver near other wireless devices that may cause interference (e.g., Wi-Fi routers, other wireless peripherals).
- Ensure the mouse is fully charged.
- Tracking issues:
- Clean the optical sensor on the underside of the mouse.
- Use the mouse on a clean, uniform surface or a high-quality mouse pad.
- Check DPI settings in the web-based software.
- Buttons not responding:
- Ensure the mouse is powered on and connected.
- Check for any debris or obstructions around the buttons.
- If using the web-based software, ensure button assignments are correct.
Specifications
| Product Dimensions | 4.88 x 2.52 x 0.04 inches |
| Item Weight | 1.66 ounces (approx. 47g) |
| Connectivity Technology | 2.4G Wireless, USB Wired |
| Movement Detection Technology | Optical (PAW3950 Sensor) |
| Maximum DPI | 30000 DPI |
| Polling Rate | Up to 8000 Hz (with 8K dongle) |
| Switches | Optical Switches (70+ million clicks lifespan) |
| Encoder | Dust-Proof Encoder (30-grid roller) |
| MCU | Nordic 52840 |
| Battery | 1 Lithium Ion battery (included) |
| Color | Purple |
Product Overview
Warranty and Support
For warranty information, technical support, and the latest drivers or firmware updates, please visit the official Lamzu website. You can typically find support resources, FAQs, and contact information for customer service there.
Official Lamzu Website: Lamzu Store on Amazon (Note: For direct manufacturer support, search for the official Lamzu website online.)
