PowMr POW-M35-PRO-12V24V

Download PDF
Contents

PowMr 35A MPPT Solar Charge Controller User Manual

Model: POW-M35-PRO-12V24V

1. Product Overview

The PowMr 35A MPPT Solar Charge Controller is an advanced device designed to manage the power flow from your solar panels to your battery bank, ensuring efficient and safe charging. It features Maximum Power Point Tracking (MPPT) technology to maximize solar energy harvesting and is compatible with various battery types, including lead-acid and lithium batteries.

PowMr 35A MPPT Solar Charge Controller front view

Front view of the PowMr 35A MPPT Solar Charge Controller, showing the LCD display and control buttons.

Diagram showing the PowMr MPPT Solar Charge Controller connected to solar panels and batteries

Illustration demonstrating the high tracking and conversion efficiency of the PowMr 12V/24V Auto MPPT Solar Charge Controller in a typical setup.

2. Safety Information

Please read all instructions and warnings carefully before installation and operation. Incorrect installation can lead to serious injury or damage to the equipment. Always ensure proper polarity and connection order.

  • Ensure all connections are secure and correct before applying power.
  • Do not disassemble or attempt to repair the controller yourself. Contact qualified personnel.
  • Install the controller in a well-ventilated area, away from flammable materials.
  • Use appropriate circuit breakers and fuses for all connections.
Diagram illustrating 9 built-in protections of the PowMr Solar Controller

The PowMr solar controller incorporates 9 electronic protections, including PV overcurrent, PV short circuit, PV reverse polarity, battery reverse polarity, battery over voltage, battery over discharge, lithium battery low temperature, load overcurrent, and overtemperature protection.

3. Setup and Installation

Follow these steps for proper installation of your solar charge controller. Adhering to the correct wiring sequence is critical to prevent damage to the unit and connected components.

3.1 Wiring Sequence

  1. Connect the Battery: First, connect the battery to the charge controller. Ensure correct polarity (positive to positive, negative to negative). The controller will power on once the battery is connected.
  2. Connect the Solar Panels: Next, connect the solar panels to the charge controller. Ensure correct polarity. The controller will begin charging the battery if sufficient solar input is available.
  3. Connect the Load (Optional): Finally, connect your DC loads to the load terminals of the controller.

To disconnect the system, reverse the order: disconnect the load, then the solar panels, and finally the battery.

Two-step easy connection diagram for the solar charge controller

A visual guide to the two-step easy connection process: 1) Wiring the battery, and 2) Wiring solar panels. The diagram emphasizes connecting the battery first, then the solar panels.

Schematic wiring diagram for a solar power system with the PowMr controller

Detailed schematic wiring diagram showing the connection of solar panels, the PowMr controller, battery, inverter, and DC load. It highlights the connection order: battery, load, then PV array.

4. Operating Instructions

The PowMr solar charge controller features an intuitive LCD display and four control buttons for easy operation and parameter adjustment.

4.1 LCD Display and Buttons

The LCD screen provides real-time information about the system status, including PV voltage, battery voltage, charging current, and load status. The four buttons (PV, BAT, DC, SET) allow navigation and parameter modification.

Close-up of the PowMr controller's LCD screen and buttons

Close-up view of the controller's LCD screen and the PV, BAT, DC, and SET buttons.

4.2 Battery Voltage Calibration

If there is a discrepancy between the battery voltage displayed by the controller and the value measured by a multimeter, you can calibrate the battery voltage. Long press the BAT/▲ key to enter the setting program. Use the BAT/▲ and DC/▼ keys to adjust the value, then press the key to save and confirm.

LCD screen showing battery voltage calibration interface

The LCD screen displaying the battery voltage calibration interface, indicating how to adjust the voltage value.

4.3 Battery Type Selection

The controller is compatible with various battery types. You can select pre-set parameters for Sealed, Gel, Flooded, and Lithium (LFP) batteries, or customize charging parameters for other battery types.

Diagram showing battery type selection options on the PowMr controller

The controller supports multiple 12V/24V battery types, including AGM, GEL, FLD (Flooded), LI (Lithium), and SLA. Users can select pre-set parameters or define custom charging parameters.

4.4 Load Work Modes

The controller offers multiple load work modes to suit different application needs:

  • 00H: Load Turn OFF
  • 24H: Load always Turn ON
  • 01H~23H: Time control (Set load ON's duration)
Diagram illustrating multiple load work modes

Visual representation of the multiple load work modes available on the controller: 00H (Load Turn OFF), 24H (Load always Turn ON), and 01H~23H (Time control for load duration).

5. Maintenance

Regular maintenance ensures optimal performance and longevity of your solar charge controller and system.

  • Inspect Connections: Periodically check all wiring connections for tightness and corrosion. Loose connections can cause overheating and poor performance.
  • Clean Controller: Keep the controller clean and free from dust and debris. Ensure ventilation openings are not blocked.
  • Monitor System Performance: Regularly check the LCD display for normal operation and any error codes. Compare readings with a multimeter if necessary.
  • Battery Health: Ensure your batteries are well-maintained according to their manufacturer's guidelines.

6. Troubleshooting

The controller's LCD display provides fault codes to help diagnose common issues. Refer to the table below for troubleshooting guidance.

LCD screen showing working mode and troubleshooting fault codes

The LCD screen displaying working mode information and a table of common fault codes with their causes and solutions.

Troubleshooting Guide
Fault CodeCauseSolution
18Input photovoltaic voltage too lowIncrease the number of solar panels or connect them in series to raise the photovoltaic input voltage.
60Overtemperature protectionAllow the equipment to cool to below the recovery temperature to resume normal charging and discharging.
63Battery voltage too highMeasure to confirm if battery voltage exceeds rated voltage and disconnect photovoltaic array circuit breaker.
65Battery voltage too lowCharge the battery until voltage exceeds the undervoltage recovery point. Refer to "5.7 Default Parameters for Different Battery Types" for details.
71Input photovoltaic voltage too highReduce the number of photovoltaic arrays connected to the controller to lower photovoltaic input, or adjust series and parallel connections to reduce voltage or current values.
72Overdischarging currentReduce output terminal load to ensure total load is within rated limits of the controller and battery.
73Overcharging currentReduce output terminal load to ensure total load is within rated limits of the controller and battery.

7. Specifications

Key technical specifications for the PowMr 35A MPPT Solar Charge Controller (POW-M35-PRO-12V24V).

Technical Specifications
FeatureDescription
Model NumberPOW-M35-PRO-12V24V
Max PV Input (12V Battery)420W
Max PV Input (24V Battery)840W
Max. PV Open-Circuit Voltage<80V
Battery Voltage12V/24V Auto
Charging Algorithm3-stage (MPPT)
Tracking EfficiencyUp to 98%
Peak Conversion EfficiencyUp to 97%
Display TypeLCD
Product Dimensions5.31 x 2.55 x 7.67 inches (13.49 x 6.48 x 19.48 cm)
Item Weight1.98 pounds (900 grams)
Country of OriginChina

8. Warranty and Support

For warranty information and technical support, please refer to the documentation provided with your purchase or contact PowMr customer service directly. Details regarding warranty periods and claims procedures are typically available on the manufacturer's official website or through your retailer.

Always provide your product model number (POW-M35-PRO-12V24V) and purchase date when seeking support to ensure efficient service.

© 2025 PowMr. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.