Manuals+

CANMOV CD0276

CANMOV Power Lift Recliner Chair User Manual

Model: CD0276

Introduction

Thank you for choosing the CANMOV Power Lift Recliner Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new recliner. Please read these instructions thoroughly before use and retain them for future reference.

A brown faux leather recliner chair with an 'Oversized Design' label, highlighting its spacious seating area.
Figure 1: The recliner features an oversized design for enhanced comfort.

Important Safety Information

Package Contents

Your CANMOV Power Lift Recliner Chair is shipped in three separate boxes. Components may arrive at different times. Please verify all parts are present before beginning assembly.

Image showing three boxes labeled Box 1, Box 2, Box 3, indicating the recliner ships in multiple packages.
Figure 2: The recliner is delivered in three separate boxes.

Expected components include:

Setup and Assembly

Assembly typically requires two people. Follow these steps carefully:

  1. Unpack Components: Carefully remove all parts from the boxes and place them on a soft, clean surface to prevent damage.
  2. Attach Backrest: Slide the backrest onto the chair base until it clicks securely into place. Ensure both sides are fully engaged.
  3. Connect Wiring: Locate the electrical cables extending from the backrest and the chair base. Connect them according to the color-coded or labeled connectors. Ensure all connections are firm.
  4. Attach Side Arms: Slide the side arms onto the designated slots on the chair base. Secure them with the provided hardware, if applicable.
  5. Connect Power: Plug the power adapter into the chair's power input, then plug the power cord into a standard electrical outlet.
  6. Initial Test: Before sitting, perform a brief test of the lift and recline functions using the side control panel to ensure proper operation.
Underside view of the recliner mechanism, showing the metal frame and motor components.
Figure 3: View of the chair's base mechanism, illustrating the sturdy construction.

Operating Instructions

Power Lift and Recline Functions

The chair features a dual-motor system for independent control of the backrest and footrest, as well as a power lift function.

Diagram showing the recliner in various positions: upright, reclined, TV viewing, and lift assist, with control buttons for power headrest, tilt, lift, and recline.
Figure 4: Control panel and various chair positions (Reclined, TV, Up).
Close-up of the chair's side control panel with buttons labeled Back, Tilt, Lift, Recline, and a USB port.
Figure 5: Detailed view of the integrated control buttons and USB port.
Sequence of images showing the recliner transitioning from reading position, to watching TV, to napping, and finally to the stand-up assist position.
Figure 6: Illustrates various functional positions: Reading, Watching TV, Napping, and Stand-up assist.

Massage and Heat Functions

The chair is equipped with a remote control for massage and lumbar heat functions.

Image of the recliner with massage points indicated by white circles and a red circle for lumbar heat, alongside a remote control and icons for lumbar heating, 8 points massage, 5 massage modes, and timing control.
Figure 7: Overview of massage and heating features with remote control.

USB Charging Ports and Cup Holders

Close-up of a concealed cup holder in the armrest of the recliner, holding a glass of water.
Figure 8: Concealed cup holder in the armrest.
Close-up showing the USB charge port, control buttons, side pocket, and vintage rivet decoration on the recliner.
Figure 9: Integrated USB port, control buttons, and side storage pocket.

Care and Maintenance

Close-up of the faux leather material and stitching on the recliner.
Figure 10: Detail of the faux leather material and stitching.

Troubleshooting

ProblemPossible CauseSolution
Chair does not operate (no power).Power cord unplugged or loose connection. No power at outlet.Check if the power cord is securely plugged into the chair and the wall outlet. Test the outlet with another device.
Lift or recline function is not smooth.Obstruction in mechanism. Loose connections.Ensure there are no objects obstructing the chair's mechanism. Check all assembly connections.
Massage or heat not working.Remote control battery low or not connected. Power issue.Ensure the remote control is properly connected and functioning. Verify the main power to the chair.
USB port not charging devices.Device requires too much power. Loose connection.Ensure the device is low-power (e.g., smartphone, tablet). Check the USB cable and connection.

Product Specifications

Diagram showing the dimensions of the recliner chair, including height, width, depth, seat depth, and backrest height, with a weight capacity of 350 lbs.
Figure 11: Detailed product dimensions and weight capacity.

Warranty and Customer Support

Warranty Information: The manufacturer typically offers a 1-year warranty on this product. Please retain your proof of purchase for warranty claims.

Customer Support: For any questions, concerns, or assistance with assembly, operation, or warranty claims, please contact CANMOV customer support. The manufacturer aims to respond to all inquiries within 24 hours.

Visit the official CANMOV store for more information: CANMOV Store

Related Documents - CD0276

Preview CANMOV Recliner Chair User Manual and Return Policy
This document provides attention and return policy, brand story, product specifications, fitting list, assembly instructions, remote operation, usage information, maintenance tips, and important attentions for CANMOV recliner chairs.
Preview CANMOV Power Lift Recliner User Manual & Return Policy
Comprehensive guide for CANMOV power lift recliners, covering installation, assembly, usage, maintenance, cleaning, return policy, and brand story. Includes troubleshooting tips and contact information.