Introduction
Thank you for choosing the EDYELL A1 Bluetooth Headset. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new motorcycle helmet headset. Please read this manual thoroughly before use to ensure optimal performance and safety. Keep this manual for future reference.
Product Overview
Key Features:
- Smart LED Display: Provides real-time information on battery capacity, Bluetooth pairing status, and FM channel.
- 50MM Speakers: Enhanced volume and bass performance for a superior audio experience.
- Long Battery Life: 800mAh battery offers up to 30 hours of music playback, 40 hours of calls, and over 300 hours of standby time.
- Auto Call Answer & Voice Control: Automatically answers calls in 10 seconds and supports voice assistant activation (Siri/Voice Assistant).
- IP67 Waterproof: Designed to withstand various weather conditions.
- Universal Compatibility: Compatible with most motorcycle helmets.
Components:
The EDYELL A1 headset includes the main unit, 50mm speakers, and microphones, along with necessary cables for installation and charging.
Setup
1. Charging the Headset:
- Connect the provided Type-C charging cable to the headset's charging port and a USB power source.
- The LED display will indicate charging status. A full charge takes approximately 1.5 hours.
- Ensure the headset is fully charged before first use for optimal battery longevity.
2. Helmet Installation:
- Attach the main headset unit to the side of your helmet using the provided mounting clip or adhesive bracket. Ensure it is securely fastened.
- Carefully route the speaker wires inside the helmet lining. Position the 50mm speakers into the ear pockets of the helmet. If your helmet lacks specific cutouts, ensure the speakers are placed comfortably without causing pressure points.
- Attach the microphone to a suitable position inside the helmet, typically near your mouth, ensuring clear voice pickup and minimal wind noise.
- Connect the speaker and microphone cables to the main headset unit.
3. Bluetooth Pairing:
- With the headset powered off, press and hold the power button until the LED display shows "Pairing" or a similar indicator.
- On your mobile device, enable Bluetooth and search for available devices.
- Select "EDYELL A1" from the list of devices.
- Once connected, the LED display will confirm the successful pairing.
Operating Instructions
Power On/Off:
- Power On: Press and hold the power button for approximately 3 seconds until the LED display illuminates.
- Power Off: Press and hold the power button for approximately 5 seconds until the LED display turns off.
Music Playback:
- Play/Pause: Press the multi-function button once.
- Next Track: Press the '+' button.
- Previous Track: Press the '-' button.
- Volume Up: Long press the '+' button.
- Volume Down: Long press the '-' button.
Call Handling:
- Answer Call: The headset will automatically answer incoming calls after 10 seconds. Alternatively, press the multi-function button once to answer immediately.
- End Call: Press the multi-function button once during a call.
- Reject Call: Press and hold the multi-function button for 2 seconds when a call comes in.
- Redial Last Number: Double-press the multi-function button.
Voice Control:
Activate your smartphone's voice assistant (Siri, Google Assistant, etc.) by pressing the dedicated voice control button on the headset. You can then issue commands such as making calls, getting directions, or playing specific music.
FM Radio:
- Activate FM: Press the 'M' button to switch to FM radio mode.
- Scan Channels: Press the multi-function button to automatically scan and save available FM stations.
- Change Station: Use the '+' and '-' buttons to cycle through saved stations.
- Exit FM: Press the 'M' button again to return to Bluetooth mode.
LED Display:
The smart LED display provides visual feedback on the headset's status, including battery level, Bluetooth connection status, and current FM frequency. Refer to the display for quick status checks.
Maintenance
Cleaning:
- Wipe the headset unit with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
- The IP67 waterproof rating protects against dust and temporary immersion in water, but avoid prolonged submersion.
Storage:
- Store the headset in a cool, dry place away from direct sunlight and extreme temperatures.
- If storing for an extended period, charge the battery to approximately 50% to preserve its lifespan.
Battery Care:
- Avoid fully discharging the battery frequently.
- Charge the headset regularly, even if not in frequent use, to maintain battery health.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Headset does not power on. | Low battery. | Charge the headset for at least 1.5 hours. |
| Cannot pair with device. | Headset not in pairing mode; Bluetooth off on device; device too far. | Ensure headset is in pairing mode (LED indicator); enable Bluetooth on your device; keep devices within 1 meter during pairing. |
| No sound or low volume. | Volume too low; speakers improperly positioned; loose connection. | Increase volume on both headset and connected device; adjust speaker position in helmet; check all cable connections. |
| Poor call quality (other person cannot hear me clearly). | Microphone not positioned correctly; excessive wind noise. | Adjust microphone closer to your mouth; ensure microphone is shielded from direct wind. |
| Audio imbalance (one speaker louder). | Speaker positioning; internal wiring issue. | Verify both speakers are correctly and equally positioned in the helmet's ear pockets. If issue persists, contact support. |
| FM radio not working. | Weak signal; not in FM mode. | Move to an area with better signal; ensure headset is in FM mode (press 'M' button). |
Specifications
| Feature | Detail |
|---|---|
| Model Name | MBH-A1 |
| Connectivity Technology | Wireless (Bluetooth) |
| Bluetooth Version | 5.0 |
| Audio Driver Type | Dynamic Driver (50mm Speakers) |
| Noise Control | Active Noise Cancellation |
| Battery Capacity | 800mAh Lithium Ion |
| Charging Time | 1.5 Hours |
| Music Playback Time | Up to 30 Hours |
| Call Time | Up to 40 Hours |
| Standby Time | Over 300 Hours |
| Water Resistance Level | IP67 Waterproof |
| Control Method | Touch, Voice |
| Item Weight | 270 Grams |
| Product Dimensions | 14 x 9.5 x 6 cm |
| Included Components | Cable |
Warranty and Support
Warranty:
The EDYELL A1 Bluetooth Headset comes with a 12 Months EDYELL India Warranty from the date of purchase. This warranty covers manufacturing defects. Please retain your proof of purchase for warranty claims.
Customer Support:
For any questions, technical assistance, or warranty claims, please contact EDYELL customer service:
- Email: support@fenman.in
- Phone: +91 8882786235
