Kenmore 2629162
Kenmore 4.4 cu. ft. Top Load Washer User Manual
Model: 2629162
Introduction
This user manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Kenmore 4.4 cu. ft. Top Load Washer. This appliance is designed to handle various laundry loads with its generous capacity and advanced cleaning features. Please read this manual thoroughly before using your washer to ensure optimal performance and longevity.
Important Safety Information
To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following:
- Read all instructions before using the appliance.
- Do not wash articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, or other flammable or explosive substances, as they give off vapors that could ignite or explode.
- Do not add gasoline, dry-cleaning solvents, or other flammable or explosive substances to the wash water. These substances give off vapors that could ignite or explode.
- Do not allow children to play on or in the appliance. Close supervision of children is necessary when the appliance is used near children.
- Before the appliance is removed from service or discarded, remove the door or lid to the washing compartment.
- Do not reach into the appliance if the tub or agitator is moving.
- Do not install or store this appliance where it will be exposed to the weather.
- Do not tamper with controls.
- Do not repair or replace any part of the appliance or attempt any servicing unless specifically recommended in this user-maintenance instructions or in published user-repair instructions that you understand and have the skills to perform.
- Always disconnect the appliance from the power supply before attempting any service.
What's in the Box
Upon unpacking your Kenmore Top Load Washer, please ensure all the following components are present:
- Kenmore 4.4 cu. ft. Top Load Washer Unit
- Instruction Manual
- Filter (2)
- Drain Hose Guide
- Cable Tie
If any items are missing or damaged, please contact Kenmore customer support immediately.
Setup
Unpacking and Placement
Carefully remove all packaging materials, including the base packaging. Place the washer on a firm, level floor capable of supporting the washer's weight when fully loaded with water and laundry. Ensure there is adequate space around the washer for proper ventilation and access for maintenance.

Leveling the Washer
It is crucial to level the washer to prevent excessive vibration and noise during operation. Adjust the leveling feet at the bottom of the washer until the unit is stable and level in all directions. Use a spirit level to verify.
Water and Drain Connections
- Connect the hot and cold water inlet hoses to the corresponding valves on the back of the washer and to your household water supply. Ensure connections are tight to prevent leaks.
- Insert the drain hose into a standpipe or laundry tub, ensuring it is securely fastened to prevent dislodging during the drain cycle. Use the provided drain hose guide.
Electrical Connection
Plug the washer's power cord into a grounded 3-prong outlet. Do not remove the grounding prong or use an adapter. Ensure the electrical supply meets the requirements listed in the specifications section.
Operating Your Washer
Control Panel Overview
The Kenmore Top Load Washer features an intuitive knob and touch control console with an LED display for easy cycle selection and status monitoring.

Loading the Washer
Open the soft-close tempered glass lid and load clothes evenly around the Triple Action Agitator. Do not overload the washer to ensure proper cleaning and agitation.

Selecting a Wash Cycle
Turn the central knob to select one of the 10 available wash cycles:
- Normal/Casual: For everyday cottons and mixed fabrics.
- Bulky/Bedding: Ideal for large items like comforters and blankets, using hot water and specific wash motions.
- Heavy Duty: For heavily soiled, durable items.
- Towels: Optimized for absorbent towel loads.
- Whites: For white fabrics, often with higher wash temperatures.
- Delicates: Gentle cycle for fragile items.
- Express Wash: Cleans small loads in as little as 28 minutes (based on a 3-lb load, default cycle setting).
- Cold Clean: Cleans gently and completely using up to 90% less energy (compared to normal cycle, default settings, 8-lb load).
- Rinse & Spin: For rinsing and spinning items without a full wash cycle.
- Clean Washer: A self-cleaning cycle for maintaining the washer drum.
Customizing Wash Options
After selecting a cycle, you can customize settings using the touch controls:
- Wash Temp: Select from Hot, Warm, or Cold.
- Soil Level: Adjust for Extra Heavy, Heavy, Medium, Light, or Auto soil levels.
- Water Level: Choose Deep Fill for maximum water level, or allow the washer to automatically detect.
- Fabric Softener: Activate for automatic fabric softener dispensing.
- Extra Rinse: Add an additional rinse cycle, beneficial for sensitive skin.
- Accela Wash: Reduces wash time for full-size loads by up to 51% (compared to a standard 8-lb load, normal cycle, warm wash temp, extra heavy soil setting).
- Delay Start: Postpone the start of the wash cycle.
Starting a Cycle
Press the Start/Pause button to begin the selected wash cycle. The LED display will show the remaining time and current cycle status.
Maintenance
Cleaning the Washer Drum
Regularly use the "Clean Washer" cycle to prevent odor and residue buildup in the drum. Follow the instructions for adding a washer cleaner if recommended.
Cleaning Dispensers
Periodically clean the detergent and fabric softener dispensers to remove any residue that may accumulate and affect dispensing performance.
Exterior Cleaning
Wipe down the exterior surfaces of the washer with a soft, damp cloth. Avoid abrasive cleaners that could damage the finish.
Water Inlet Filters
Inspect and clean the water inlet filters periodically to prevent blockages that could affect water flow. Turn off water supply before cleaning.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Washer does not start | Power cord unplugged; Lid not closed properly; Circuit breaker tripped. | Ensure power cord is securely plugged in. Close the lid firmly. Check and reset the circuit breaker if necessary. |
| Excessive vibration or noise | Washer is not level; Load is unbalanced; Shipping bolts not removed. | Adjust leveling feet to ensure the washer is stable. Redistribute laundry evenly in the drum. Ensure all shipping bolts have been removed during installation. |
| Water not draining | Drain hose kinked or clogged; Pump filter clogged. | Check drain hose for kinks or obstructions. Refer to the full instruction manual for pump filter cleaning instructions. |
| Clothes are still wet after spin cycle | Load is unbalanced; Drain issue; Excessive suds. | Redistribute load and run a Rinse & Spin cycle. Check for drain issues. Use less detergent to avoid excessive suds. |
| Water leaks | Hose connections loose; Drain hose not secured; Excessive suds. | Tighten all water inlet hose connections. Ensure drain hose is properly installed and secured. Reduce detergent amount. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Kenmore |
| Model Number | 2629162 |
| Capacity | 4.4 Cubic Feet |
| Installation Type | Freestanding |
| Item Weight | 125.7 pounds |
| Product Dimensions (D x W x H) | 30 x 27 x 44 inches |
| Special Feature | Triple Action Agitator |
| Color | White |
| Control Console | Knob & Touch |
| Standard Cycles | 10 |
| Access Location | Top Load |
| Country of Origin | China |
| First Available Date | December 27, 2024 |

Warranty and Support
Product Warranty
This Kenmore appliance comes with a standard manufacturer's warranty. For detailed information regarding the warranty period, coverage, and terms and conditions, please refer to the warranty card included with your purchase or visit the official Kenmore website. Keep your proof of purchase for warranty claims.
Customer Support
For technical assistance, service requests, or general inquiries about your Kenmore washer, please contact Kenmore customer support. Contact information can typically be found in the full instruction manual or on the Kenmore brand website.
You can also visit the Kenmore Store on Amazon for additional product information and resources.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.