Philips Ledinaire BVP167 LED Floodlight User Manual

1. Product Overview

The Philips Ledinaire BVP167 LED Floodlight is a high-performance outdoor lighting solution designed for various applications. Featuring a robust IP65 rating, it is protected against dust and water ingress, making it suitable for outdoor environments. This model includes an integrated motion and light detector for enhanced energy efficiency and security. With a powerful 50W LED array delivering 6000 lumens and a color temperature of 3000 Kelvin, it provides bright, symmetrical illumination.

Figure 1: Philips Ledinaire BVP167 LED Floodlight with integrated motion and light sensor.

2. Safety Information

Please read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other injuries.

• Electrical Safety: Installation must be performed by a qualified electrician in accordance with local electrical codes. Ensure power is disconnected at the circuit breaker before installation or maintenance.
• Mounting: Mount the floodlight securely on a stable surface. Ensure the mounting location can support the weight of the fixture.
• Operating Temperature: Do not operate the floodlight outside its specified temperature range.
• Non-Dimmable: This product is non-dimmable. Do not connect it to a dimmer switch.
• Eye Protection: Do not stare directly into the LED light source when illuminated.

3. Package Contents

Verify that all components are present before beginning installation:

• 1 x Philips Ledinaire BVP167 LED Floodlight with integrated motion sensor
• Mounting bracket (pre-attached)
• Installation screws and anchors (may vary by region)
• User Manual (this document)

4. Setup and Installation

Follow these steps for proper installation of your Philips Ledinaire BVP167 LED Floodlight:

1. Choose Location: Select a suitable outdoor location for mounting, ensuring it is within reach of the power supply and provides the desired illumination coverage. Consider the motion sensor's detection range.
2. Prepare Wiring: Disconnect power to the circuit at the main breaker. Strip the ends of the power supply wires (Live, Neutral, Ground) according to local electrical codes.
3. Mounting:
   • Use the pre-attached mounting bracket as a template to mark drilling points on the wall or mounting surface.
   • Drill holes and insert appropriate anchors if necessary.
   • Secure the mounting bracket to the surface using the provided screws.
   • Attach the floodlight fixture to the mounted bracket, ensuring it is firmly secured.
4. Electrical Connection: Connect the floodlight's wires to the main power supply wires:
   • Brown/Black wire (Live) to Live wire.
   • Blue wire (Neutral) to Neutral wire.
   • Green/Yellow wire (Ground) to Ground wire.
   Ensure all connections are secure and insulated.
5. Adjust Angle: Adjust the floodlight's angle to direct the light as desired. The beam angle is adjustable.
6. Restore Power: Once installation is complete and all connections are secure, restore power at the circuit breaker.

Figure 2: Dimensional drawing of the floodlight, showing various measurements for different wattage models (50W model dimensions are relevant here).

5. Operating Instructions

The Philips Ledinaire BVP167 features an integrated motion and light detector for automatic operation.

Motion and Light Sensor Operation:

The floodlight will automatically turn on when motion is detected within its range and the ambient light level is below a certain threshold (e.g., at dusk or night). It will turn off after a set delay once no motion is detected.

Adjusting Settings:

The floodlight may have adjustable settings for sensitivity, time delay, and lux level (ambient light threshold). These are typically controlled via small dials or switches located near the sensor. Refer to the specific markings on your unit for adjustment.

Figure 3: Close-up view of a potential color temperature switch (WW, NW, CW) on the floodlight. Note: This specific model is listed as 3000K, so this image might represent a variant or general feature.

• Time Delay (TIME): Adjusts how long the light stays on after motion stops.
• Sensitivity (SENS): Adjusts the detection range of the motion sensor.
• Lux Level (LUX): Adjusts the ambient light threshold at which the sensor becomes active. For example, setting it to a lower lux value means the light will only activate in darker conditions.

Test the settings after adjustment to ensure desired operation.

6. Maintenance

The Philips Ledinaire BVP167 LED Floodlight requires minimal maintenance.

• Cleaning: Periodically clean the lens and sensor with a soft, damp cloth to ensure optimal performance. Do not use abrasive cleaners or solvents.
• Inspection: Regularly inspect the fixture for any signs of damage, loose connections, or wear. If any damage is found, disconnect power and have it inspected by a qualified technician.
• LEDs: The LEDs are integrated and not user-replaceable. The product has a long average lifespan of 50,000 hours.

7. Troubleshooting

If troubleshooting steps do not resolve the issue, contact Philips customer support or a qualified electrician.

8. Specifications

9. Warranty and Support

This Philips Ledinaire BVP167 LED Floodlight comes with a 3-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

For technical support, warranty claims, or further assistance, please contact Philips customer service or visit the official Philips website. Contact information can typically be found on the product packaging or the Philips brand store page.

Philips Brand Store: Visit the Philips Store on Amazon.com.be