Vortex Optics Venom 5-25x56 FFP Riflescope & Crossfire HD 1400 Laser Rangefinder User Manual

Introduction

This manual provides detailed instructions for the proper setup, operation, maintenance, and troubleshooting of your Vortex Optics Venom 5-25x56 First Focal Plane (FFP) Riflescope and Crossfire HD 1400 Laser Rangefinder. Please read this manual thoroughly before using your new equipment to ensure optimal performance and longevity.

Product Overview

Vortex Optics Venom 5-25x56 FFP Riflescope

The Venom 5-25x56 FFP Riflescope is designed for long-range precision and competition, featuring a 34mm main tube and a robust optical system. Its First Focal Plane (FFP) reticle ensures accurate subtensions across all magnification settings.

Figure 1: Vortex Optics Venom 5-25x56 Riflescope and Crossfire HD 1400 Laser Rangefinder.

Figure 2: Close-up of the Venom 5-25x56 Riflescope, showing the objective lens and magnification ring.

Figure 3: The Venom 5-25x56 Riflescope, highlighting the elevation and windage turrets.

Figure 4: Diagram illustrating the EBR-7C MOA Reticle at 5x and 25x magnification, showing how subtensions remain accurate.

Key Features:

• XD Optical System: Delivers impressive resolution and color fidelity.
• Fully Multi-Coated Lenses: Maximizes light transmission for peak clarity.
• EBR-7C Reticle: First Focal Plane reticle for accurate subtensions.
• RevStop Zero System: Provides a reliable return to zero.
• Fast Focus Eyepiece: Allows for quick reticle focusing.
• Included Throw Lever: Facilitates rapid magnification changes.
• Armortek Coating: Protects exterior lenses from scratches, oil, and dirt.
• Nitrogen Purged & O-Ring Sealed: Ensures fogproof and waterproof performance.
• Shockproof Construction: Built to withstand recoil and impact.

Vortex Optics Crossfire HD 1400 Laser Rangefinder

The Crossfire HD 1400 is a compact and lightweight laser rangefinder, offering up to 1400 yards of ranging capability. It features a crisp HD optical system and multiple ranging modes for various hunting scenarios.

Figure 5: Front view of the Crossfire HD 1400 Laser Rangefinder, showing the objective lens and laser emitter/receiver.

Figure 6: Side view of the Crossfire HD 1400 Laser Rangefinder, showing the menu button and eyepiece.

Key Features:

• HD Optical System: Delivers clear and bright images.
• XR Lens Coatings: Enhances light transmission.
• Max Ranging Capability: Up to 1400 yards.
• Multiple Target Modes: Normal, First, and Last.
• Multiple Ranging Modes: HCD (Horizontal Component Distance) and LOS (Line of Sight).
• Red TOLED Display: Provides clear readouts in various lighting conditions.
• Waterproof & Shockproof: Durable construction for field use.
• Armortek Coating: Protects exterior lenses.

Setup

Riflescope Setup

1. Mounting: Securely mount the Venom 5-25x56 Riflescope to your firearm using appropriate 34mm rings. Ensure proper eye relief and reticle alignment. Refer to your ring manufacturer's instructions for torque specifications.
2. Eyepiece Focus: Look through the eyepiece at a plain, light-colored wall or the sky. Rotate the fast focus eyepiece until the reticle appears sharp and clear. This adjustment is critical for accurate aiming.
3. RevStop Zero System:
   • After zeroing your riflescope at your desired distance, loosen the set screws on the elevation turret.
   • Lift the turret cap and rotate it until the "0" mark aligns with the indicator line on the scope body.
   • Insert the RevStop Zero Ring into the turret assembly, ensuring it seats properly.
   • Tighten the set screws on the elevation turret. This sets your permanent zero stop, allowing for quick and consistent return to zero after making elevation adjustments.

Laser Rangefinder Setup

1. Battery Installation: Unscrew the battery cap on the Crossfire HD 1400. Insert the included CR2 battery with the positive (+) terminal facing outwards. Replace the battery cap and tighten securely to maintain waterproof sealing.
2. Lanyard Attachment: Attach the wrist lanyard to the designated loop on the rangefinder for secure handling.

Operating Instructions

Riflescope Operation

1. Magnification Adjustment: Rotate the magnification ring to adjust the power from 5x to 25x. The included throw lever can be attached to the magnification ring for faster adjustments.
2. Parallax Adjustment: The side parallax knob allows for fine-tuning the focus of the target image and eliminating parallax error. Rotate the knob until the target appears sharp and clear at the indicated distance.
3. Elevation and Windage Adjustments:
   • The elevation turret (top) and windage turret (right) are used to adjust the point of impact.
   • Each click on the turret corresponds to a specific change in point of impact (e.g., 0.25 MOA per click).
   • Refer to the markings on the turrets for precise adjustments.
4. EBR-7C Reticle Use: The EBR-7C is a First Focal Plane (FFP) reticle, meaning its subtensions remain accurate at all magnification levels. Use the hash marks for holdovers and windage corrections based on your ballistic data.

Laser Rangefinder Operation

1. Power On/Ranging: Press the MEASURE button (top button) to power on the unit and immediately begin ranging. The display will show the distance to the target.
2. Mode Selection: Press the MENU button (side button) to cycle through different modes:
   • Target Modes:
     • Normal: Standard ranging mode.
     • First: Displays the distance to the closest object in the laser path. Useful for ranging small targets in busy backgrounds.
     • Last: Displays the distance to the furthest object in the laser path. Useful for ranging targets behind brush or other obstructions.
   • Ranging Modes:
     • HCD (Horizontal Component Distance): Provides angle-compensated distance, ideal for most hunting scenarios.
     • LOS (Line of Sight): Provides the true line-of-sight distance.
3. Display Brightness: Adjust the brightness of the red TOLED display by holding the MENU button and pressing the MEASURE button.
4. Scan Feature: Hold down the MEASURE button to continuously scan and range multiple targets as you pan the rangefinder.

Maintenance

Proper care and maintenance will ensure the longevity and performance of your Vortex Optics products.

• Cleaning Lenses:
  • Use the included lens cloth or a soft, lint-free cloth.
  • For stubborn dirt or smudges, use a breath of air or a lens brush to remove loose debris, then apply a small amount of lens cleaning fluid to the cloth (not directly to the lens) and gently wipe.
  • Avoid using harsh chemicals or abrasive materials.
  • The Armortek coating provides excellent protection against scratches, oil, and dirt.
• General Cleaning: Wipe down the exterior surfaces with a soft, damp cloth. Avoid submerging the riflescope or rangefinder in water, although they are waterproof, excessive exposure is not recommended for cleaning.
• Storage: Store your optics in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure lens caps are in place to protect the lenses.
• Battery Replacement (Rangefinder): Replace the CR2 battery when the low battery indicator appears on the display.

Troubleshooting

If you encounter issues with your Vortex Optics products, refer to the following common problems and solutions.

If problems persist, please contact Vortex Optics customer support for assistance.

Specifications

Warranty & Support

Vortex VIP Warranty

Vortex Optics stands behind its products with an unlimited, unconditional, lifetime VIP Warranty. This warranty is fully transferable and covers repair or replacement of your item if it becomes damaged or defective. It does not cover loss, theft, deliberate damage, or cosmetic damage that does not hinder performance.

For warranty service or technical support, please contact Vortex Optics directly. Visit their official website for the most current contact information and service procedures.

Note: Always register your product with Vortex Optics to facilitate any future warranty claims.