1. Safety Information
Please read all safety instructions carefully before installation and use. Retain this manual for future reference.
- Ensure the power supply is disconnected before installation or maintenance.
- Installation should be performed by a qualified electrician if you are unsure.
- Do not modify the product in any way.
- This product is rated IP65 for water and dust resistance, suitable for damp and outdoor locations.
- Operating voltage: 220-240V AC.
For detailed safety guidelines, refer to the official safety document:
2. Product Overview
The Ledvion LED Ceiling Lamp (Model LV10085) is a versatile and durable lighting solution designed for both indoor and outdoor environments. It features IP65 protection against water and dust, high light output, and adjustable color temperature.
Key Features:
- IP65 Protection: Water and dust resistant, ideal for bathrooms, basements, facades, and other damp or outdoor areas.
- High Light Output: 20W power with 2000 lumens for powerful and energy-efficient illumination.
- Adjustable Color Temperature (CCT): Selectable between 2700K (warm white), 4000K (neutral white), and 6000K (cool white) to suit any ambiance.
- Durable Design: White plastic housing for long-lasting use.
- Easy Installation: Designed for quick surface mounting on walls or ceilings.
What's in the Box:
Image: Contents of the product packaging, including the ceiling light, mounting hardware, and manual.
- 1x Ledvion LED Ceiling Light
- 2x Screw Wall Plugs
- 2x Screws
- 2x Cover Caps
- 1x Instruction Manual
3. Installation
Follow these steps for safe and correct installation of your Ledvion LED Ceiling Lamp.
- Prepare for Installation:
- Ensure the main power supply to the installation area is switched off at the circuit breaker.
- Gather necessary tools: drill, screwdriver, wire strippers.
- Mounting the Lamp:
- Position the lamp on the desired ceiling or wall surface. Mark the drilling points for the mounting screws.
- Drill holes at the marked positions. Insert the provided wall plugs into the drilled holes.
- Secure the lamp base to the surface using the provided screws. Ensure it is firmly attached.
Image: Rear view of the lamp, illustrating the wiring connection points and the CCT switch.
- Wiring Connection:
- Connect the live (L), neutral (N), and earth (E) wires from your electrical supply to the corresponding terminals on the lamp. Follow local electrical codes.
- Ensure all connections are secure and properly insulated.
- Final Assembly:
- Carefully attach the diffuser cover to the lamp base. Ensure it is sealed correctly to maintain the IP65 rating.
- Restore power to the circuit.
4. Operating Instructions
The Ledvion LED Ceiling Lamp features an adjustable color temperature (CCT) switch, allowing you to select the desired light color before final installation or by opening the fixture.
Color Temperature Selection:
- Before closing the lamp cover, locate the CCT switch on the back or inside the lamp base (refer to the 'Easy Installation' image in Section 3).
- Slide the switch to select one of the three available color temperatures:
- 2700K: Warm White (for a cozy and inviting atmosphere)
- 4000K: Neutral White (for general task lighting and natural feel)
- 6000K: Cool White (for bright, energetic illumination)
- Once the desired color temperature is set, proceed with closing the lamp cover as described in the installation section.
Image: Visual representation of the CCT switch and selectable color temperatures.
The lamp is operated by a standard wall switch connected to its power supply.
5. Maintenance
To ensure the longevity and optimal performance of your Ledvion LED Ceiling Lamp, follow these maintenance guidelines:
- Cleaning: Disconnect power before cleaning. Wipe the lamp's exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or the IP65 seal.
- Inspection: Periodically check the lamp for any signs of damage, loose connections, or wear. If any issues are found, disconnect power and consult a qualified electrician.
- IP65 Seal: Ensure the lamp's cover is always securely fastened to maintain its water and dust resistance.
6. Troubleshooting
If you encounter issues with your Ledvion LED Ceiling Lamp, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not light up | No power supply Loose wiring connection Faulty lamp | Check circuit breaker and wall switch. Ensure wiring is correctly connected (power off first). Contact customer support if other solutions fail. |
| Light flickers | Unstable power supply Loose wiring Incompatible dimmer (if applicable) | Check power source stability. Verify all wiring connections are secure (power off first). This lamp is not specified as dimmable; avoid using with dimmers unless explicitly stated. |
| Incorrect color temperature | CCT switch set incorrectly | Disconnect power, open the lamp, and adjust the CCT switch to the desired setting. |
If the problem persists after attempting these solutions, please contact Ledvion customer support.
7. Specifications
Detailed technical specifications for the Ledvion LED Ceiling Lamp, Model LV10085.
| Feature | Specification |
|---|---|
| Model Number | LV10085 |
| Brand | Ledvion |
| Power Consumption | 20W |
| Luminous Flux | 2000 Lumens |
| Voltage | 220-240V AC |
| Color Temperature | 2700K, 4000K, 6000K (selectable) |
| IP Rating | IP65 (Water and Dust Resistant) |
| Material | Plastic |
| Color | White |
| Dimensions (Ø x H) | Ø280 mm x 71 mm (28L x 28B x 8H cm) |
| Weight | 650 g |
| Mounting Type | Surface Mount (Ceiling/Wall) |
| Light Source | Integrated LED |
Product Dimensions:
Image: Dimensional drawing of the Ledvion LED Ceiling Lamp.
Energy Label:
Image: EU Energy Label for Model LV10085.
For more detailed product information, including the official product data sheet, please visit the EPREL database:
8. Warranty and Support
This Ledvion product is designed for durability and performance. For warranty information, please refer to the terms and conditions provided at the point of purchase or contact Ledvion customer service directly.
Customer Support:
For technical assistance, troubleshooting, or warranty claims, please contact Ledvion customer support through the retailer where the product was purchased or visit the official Ledvion website.
You can also visit the Ledvion Store on Amazon for more information.