1. Product Overview
This manual provides detailed instructions for the assembly, operation, and maintenance of your chartustriable 75''H LED Farmhouse Hall Tree. This versatile 7-in-1 unit combines a coat rack, entryway bench, 5 open storage cabinets, 1 chest of drawer, 2 umbrella holders, and an LED light strip to offer a comprehensive organization solution for your mudroom or hallway.
Figure 1: Overall view of the assembled Hall Tree.
2. Safety Information
Please read and understand all safety warnings before assembly and use. Failure to follow these instructions may result in injury or product damage.
- Exercise caution around sharp edges during assembly and use.
- Keep small parts and open storage spaces out of reach of children.
- Do not expose LED light strips to excessive heat.
- Always follow assembly instructions and safety guidelines to prevent injury or damage.
3. Parts List
Before beginning assembly, carefully unpack all components and verify that all parts and hardware are present according to the included parts list. All board accessories, screws, and parts are numbered for easy identification. Lay all accessories flat on the floor to ensure nothing is missing.
Figure 2: Illustrated parts and hardware list.
4. Assembly Instructions
Follow the steps outlined in the video and accompanying instructions for proper assembly. It is recommended to have at least two people for assembly.
4.1. Assembly Video Guide
Video 1: Detailed installation guide for the chartustriable Hall Tree. This video demonstrates each step of the assembly process, from identifying parts to final setup.
4.2. Key Assembly Steps
- Prepare Components: Clearly divide all board accessories for the upper and lower parts of the product. Ensure all screws and parts are numbered and accounted for.
- Assemble Base Structure: Begin by connecting the main base panels using the provided hardware. Refer to the video for the correct orientation and screw types.
- Install Vertical Dividers: Secure the vertical dividers for the shoe cubbies and open storage sections.
- Attach Back Panels: Carefully align and attach the back panels to the main structure.
- Construct Upper Storage: Assemble the upper open storage cabinets and shelves.
- Integrate Tipper Drawer: Assemble the tipper drawer mechanism and install it into its designated slot.
- Mount Sliding Barn Doors: Attach the sliding barn door hardware and install the doors onto the bench section.
- Install Coat Hooks and Umbrella Holders: Secure the coat hooks to the back panel and the umbrella holders to the side panels.
- LED Light Strip Installation: Carefully attach the LED light strip to the designated area. Connect the power supply and controller.
Figure 3: Detailed view of the tipper drawer, umbrella handle, and sliding barn door.
5. Operating Instructions
5.1. LED Light Strip
The integrated LED light strip features three working modes: constant light mode, day mode, and night mode. Use the included controller to adjust the lighting according to your preference. Please note that specific app instructions for advanced control may not be provided; however, manual adjustment of brightness and motion settings is available.
5.2. Shoe Cubbies
The shoe cabinet storage boards are adjustable in 3 levels, allowing you to customize the height to accommodate various shoe sizes and types.
5.3. Sliding Barn Doors
The sliding barn doors provide convenient access to the shoe storage cubbies. Gently slide the doors along their tracks to open and close.
5.4. Tipper Drawer
The chest of drawer is designed for storing smaller items such as socks or gloves, keeping them organized and easily accessible.
5.5. Umbrella Holders
Two umbrella holders are provided on both sides of the unit, suitable for holding both long-handled and folding umbrellas.
6. Maintenance
To maintain the appearance and longevity of your Hall Tree, wipe surfaces with a dry cloth as needed. Avoid using harsh chemicals or abrasive cleaners.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | chartustriable |
| Model Number | B0DF7M6JBQ |
| Color | White |
| Size | 59.1 inches (Length) |
| Item Dimensions (L x W x H) | 59.1 x 15.7 x 74.8 inches |
| Item Weight | 140 Pounds |
| Material Type | Engineered Wood (MDF) |
| Assembly Required | Yes |
| Included Components | MDF panels, hardware, LED light strip |
8. Warranty and Support
For any questions regarding assembly, missing parts, or product functionality, please contact chartustriable customer support. Refer to your purchase documentation for specific warranty details.