Introduction
This manual provides detailed instructions for the proper setup, operation, and maintenance of your Sortfle AC114-06B 6-Channel RF Transmitter for electric blinds, shades, and sunshades. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
Product Overview
The Sortfle AC114-06B is a 6-channel RF transmitter designed for controlling electric blinds, shades, and sunshades. It operates on a 433.92 MHz frequency, offering a control range of up to 700 inches outdoors and 120 feet indoors, even through walls and obstacles. The remote features a comfortable and durable button design for long-lasting use. It comes with a wall mount for convenient storage and accessibility.
Remote Control Components
- Channel Display: Shows the currently selected channel (1-6).
- Up (Open) Button: Moves the blind/shade upwards or opens it.
- Down (Close) Button: Moves the blind/shade downwards or closes it.
- Pause Button (Center 'O'): Stops the blind/shade movement.
- Channel Switch (Left/Right Arrows): Used to cycle through the 6 available channels.
- AAA Battery Compartment: Located on the back for power.
Compatibility
This remote control is specifically designed for use with certain electric blind and shade motors. It is not a universal remote. Please verify your motor's model number before attempting to pair. This remote is compatible with the following series:
- AC123 series
- AC114 series
- AC127 series
- AC141 series
- AC140 series
If your motor model is not listed, this remote may not be compatible. Consult the manufacturer if you are unsure.
Setup
1. Battery Installation
The remote control requires two AAA batteries (3V). A built-in, replaceable battery is included and typically lasts about two years per replacement.
- Locate the battery compartment on the back of the remote control.
- Slide open the battery cover.
- Insert two AAA batteries, ensuring correct polarity (+/-).
- Close the battery cover securely.
2. Wall Mount Installation
The remote can be fixed to a wall using the included wall mount for convenient access.
- Choose a suitable location on your wall for the mount.
- Use screws or adhesive (not included, if applicable) to secure the wall mount.
- Slide the remote control into the mounted holder.
Operating Instructions
1. Pairing with Your Shade Motor
Before using the remote, it must be paired with your electric window shade or blind motor. This remote is a 6-channel device, capable of controlling up to six individual shades or groups of shades.
- Ensure your shade motor is powered on.
- On the shade motor, locate and press the "PROG" button. Refer to your shade motor's manual for the exact location of this button.
- Immediately after pressing the "PROG" button on the motor, press the "UP" button on your AC114-06B remote control.
- The motor should shake or jog slightly, indicating successful pairing.
- Repeat this process for each channel you wish to program, selecting a different channel on the remote using the Channel Switch buttons before pairing each new shade/group.
2. Selecting a Channel
Use the Channel Switch (Left/Right Arrows) on the remote to select the desired channel (1-6). The selected channel number will be displayed on the remote's screen.
3. Controlling Your Shades
- To open or move the shade upwards, press the "UP" button.
- To close or move the shade downwards, press the "DOWN" button.
- To stop the shade at any desired position, press the "Pause" (Center 'O') button.
Maintenance
Battery Replacement
When the remote's performance degrades or the display becomes dim, it is time to replace the batteries. Follow the battery installation steps outlined in the Setup section.
- Always use two new AAA batteries.
- Ensure correct polarity when inserting batteries.
- Dispose of old batteries responsibly according to local regulations.
Cleaning
Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners or immerse the remote in water.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote does not respond. | Dead or incorrectly installed batteries. | Replace batteries, ensuring correct polarity. |
| Shade motor does not respond to remote. | Remote not paired with motor, or incorrect channel selected. | Ensure the correct channel is selected. Re-attempt the pairing process as described in "Operating Instructions". |
| Limited control range. | Interference or excessive distance. | Ensure no major obstructions are between the remote and the motor. Move closer to the shade motor. |
| Remote controls the wrong shade. | Incorrect channel selected. | Use the Channel Switch buttons to select the correct channel for the desired shade. |
Specifications
- Model: AC114-06B (6-Channel)
- Battery Type: AAA x 2 (3V)
- Transmission Current: ≤18mA
- Transmission Power: ≤10mW
- Transmission Frequency: 433.92MHz
- RF Modulation Method: ASK
- Operating Temperature: -20°C ~ +55°C
- Control Range (Outdoors): Up to 700 inches (approx. 58 feet)
- Control Range (Indoors): Up to 120 feet
- Dimensions: 5.63 x 2.05 x 0.94 inches
- Item Weight: 3.2 ounces
Warranty and Support
For warranty information or technical support, please contact Sortfle customer service through the retailer where the product was purchased or visit the official Sortfle website. Please have your product model number (AC114-06B) and purchase date available when contacting support.
Manufacturer: Sortfle