Lubluelu Robot Vacuum and Mop Combo User Manual

1. Introduction

This user manual provides comprehensive instructions for the operation, maintenance, and troubleshooting of your Lubluelu Robot Vacuum and Mop Combo, model SL60. Please read this manual thoroughly before using the product to ensure safe and efficient operation.

Figure 1.1: Lubluelu Robot Vacuum and Mop Combo (Model SL60)

2. What's in the Box

Verify that all components are present upon unboxing:

• 1 x SL60W Robot Vacuum
• 1 x 2-in-1 Dustbin and Water Tank
• 1 x Charging Base
• 1 x Power Adapter
• 1 x Mop Cloth
• 1 x Mop Holder
• 1 x User Manual
• 4 x Side Brush
• 1 x Cleaning Tool

3. Product Features

The Lubluelu SL60 Robot Vacuum and Mop Combo is equipped with advanced features designed for efficient and thorough home cleaning.

3.1 Precision Laser Mapping and Navigation

Utilizes LDS9.0 LiDAR mapping technology for highly accurate mapping and efficient route planning. It can store up to 5 maps, allowing for customized cleaning plans across multiple floors.

Figure 3.1: Multi-Floor Mapping Capability

3.2 Powerful Suction and 2-in-1 Cleaning

Features a brush-less motor with 4000Pa suction power and three adjustable modes. The 2-in-1 design allows for simultaneous vacuuming and mopping. The precision micro-control water pump offers 3 levels of water flow (High/Medium/Low) for effective wet cleaning, including Y-shaped mopping to imitate manual cleaning.

Figure 3.2: Efficient Pet Hair and Debris Cleaning

Figure 3.3: Adjustable Water Levels for Mopping

3.3 Smart App and Voice Control

Control the robot vacuum via the Smart Life APP to monitor cleaning routes, set schedules, adjust suction and water levels, change cleaning modes, and create No-Go Zones. Compatible with Amazon Alexa and Google Assistant for voice commands (2.4GHz Wi-Fi network required).

Figure 3.4: App and Voice Control Interface

3.4 Customized Cleaning and No-Go Zones

Offers various cleaning modes including automatic, edge, zone, spot, double, and scheduled cleaning. Users can define up to 10 No-Go Zones to restrict access to specific areas like carpets or children's play areas.

Figure 3.5: Setting Up No-Go Zones

3.5 Continuous Cleaning and Self-Charging

When the battery level drops to 15% or below, the robot automatically returns to its charging base. Once charged to 80%, it resumes cleaning from where it left off, ensuring complete coverage without interruption.

Figure 3.6: Breakpoint Continuous Cleaning

3.6 Obstacle Clearance and Sensors

Equipped with 22 sensors and upgraded AI recognition technology for accurate obstacle avoidance and anti-collision performance. It can easily cross obstacles up to 18mm (0.71 inches) and features anti-fall sensors to prevent falls from stairs or edges.

Figure 3.7: Anti-Drop and Anti-Collision Features

3.7 Boost IQ Technology and Low Noise Operation

Automatically increases suction power when detecting carpet for deeper cleaning. Operates at a low noise level of 55dB, minimizing disturbance during cleaning cycles.

Figure 3.8: Boost IQ Technology for Carpet Cleaning

Figure 3.9: Low Noise Operation (55dB)

4. Setup Guide

4.1 Unpacking and Placement

1. Carefully remove the robot vacuum and all accessories from the packaging.
2. Choose a suitable location for the charging base. Ensure it is against a wall, with at least 0.5 meters (1.6 feet) of clear space on either side and 1.5 meters (4.9 feet) in front.
3. Plug the power adapter into the charging base and then into a wall outlet. Ensure the indicator light on the charging base illuminates.

4.2 Initial Charging

Place the robot vacuum onto the charging base, ensuring the charging contacts align. The robot will begin charging automatically. For first-time use, fully charge the robot before operation (approximately 4-5 hours).

4.3 App Connection (Smart Life APP)

1. Download the "Smart Life" app from your mobile device's app store (iOS or Android).
2. Register or log in to your Smart Life account.
3. Ensure your mobile device is connected to a 2.4GHz Wi-Fi network. The robot vacuum only supports 2.4GHz Wi-Fi.
4. Follow the in-app instructions to add your Lubluelu SL60 robot vacuum. This typically involves resetting the robot's Wi-Fi (refer to the robot's specific button combination for Wi-Fi reset, usually holding down the power button and home button simultaneously until a voice prompt is heard).
5. Once connected, you can name your robot and access all smart features.

5. Operating Instructions

5.1 Starting a Cleaning Cycle

• Via Robot Buttons: Press the power button on the robot to start an automatic cleaning cycle. Press again to pause.
• Via Smart Life App: Open the app, select your robot, and tap "Start Cleaning". You can choose specific cleaning modes (Auto, Edge, Zone, Spot) and adjust suction power/water levels.
• Via Voice Control: Once integrated with Amazon Alexa or Google Assistant, use voice commands such as "Alexa, ask RoboVac to start cleaning." (Note: Voice commands are generally limited to starting/stopping cleaning).

5.2 Using the Mopping Function

1. Fill the 2-in-1 dustbin and water tank with clean water.
2. Attach the mop cloth to the mop holder and then slide the mop holder onto the robot.
3. In the Smart Life app, select the desired water flow level (Low, Medium, High) for mopping.
4. Start a cleaning cycle. The robot will perform Y-shaped mopping for thorough wet cleaning.

Figure 5.1: Electronic Water Pump for Controlled Mopping

5.3 Map Management and Customization

After the first cleaning cycle, the robot will generate a map of your home. You can manage and customize this map in the Smart Life app:

• Multi-Map Storage: Save up to 5 different maps for multi-floor homes.
• Room Editing: Divide, merge, or rename rooms on the map.
• No-Go Zones: Draw virtual boundaries to prevent the robot from entering specific areas.
• Zone Cleaning: Select specific areas on the map for targeted cleaning.
• Scheduled Cleaning: Set cleaning schedules for specific rooms or the entire house at designated times.

Figure 5.2: Customized Cleaning Preferences via App

Figure 5.3: Scheduled Cleaning Example

6. Maintenance and Care

Regular maintenance ensures optimal performance and extends the lifespan of your robot vacuum.

6.1 Dustbin and Filter Cleaning

• Empty the dustbin after each cleaning cycle.
• Remove the HEPA filter and tap it gently to remove dust. Do not wash the HEPA filter with water.
• Rinse the dustbin and pre-filter with water. Ensure they are completely dry before reinserting.

6.2 Main Brush and Side Brushes

• Remove the main brush and use the provided cleaning tool to cut and remove tangled hair or debris.
• Inspect side brushes for wear or damage. Replace them if necessary (typically every 3-6 months, depending on usage).

6.3 Mop Cloth and Water Tank

• Remove and wash the mop cloth after each mopping session. Air dry completely.
• Empty any remaining water from the water tank after use to prevent mold or odors.

6.4 Sensors and Charging Contacts

• Wipe the anti-drop sensors, anti-collision sensors, and charging contacts on both the robot and the charging base with a clean, dry cloth regularly.

7. Troubleshooting

If you encounter issues with your Lubluelu SL60, refer to the following common problems and solutions:

8. Technical Specifications

Note: Product dimensions provided as 32.5"L x 32.5"W x 9.3"H. Please refer to the product packaging for exact measurements.

Figure 8.1: SL60D Features Comparison

9. Warranty and Support

Lubluelu is committed to providing full life-cycle technical support for its products. If you encounter any issues during the use of your robot vacuum, please contact our professional FAE technical support team.

For assistance, please send us a message detailing the problem you are experiencing. Our team is ready to help resolve any issues you may face.

For more information and support resources, visit the official Lubluelu store: Lubluelu Official Store