1. Introduction
This manual provides instructions for the uehba YAP1F replacement remote control, designed for use with various GREE Air Conditioner models. This remote is pre-programmed and requires no additional setup for compatible units. Please note that this remote control displays temperature exclusively in Fahrenheit.
2. Setup: Battery Installation
To begin using your remote control, you will need to install two AAA batteries (not included).
- Locate the battery compartment on the back of the remote control.
- Slide the battery cover downwards to open it.
- Insert two AAA 1.5V batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Replace the battery cover by sliding it back into position until it clicks securely.
Image 2.1: Back of the remote control with the battery compartment open, illustrating the correct placement for two AAA batteries. Batteries are not included with the remote.
Important: Remove batteries if the remote control will not be used for an extended period to prevent leakage.
3. Operating Instructions
This remote control is designed for intuitive operation. Point the remote directly at your GREE Air Conditioner unit for optimal signal transmission.
Image 3.1: Front view of the remote control, highlighting the display and key buttons. The image also indicates how to lock/unlock the keypad.
Basic Functions:
- ON/OFF Button: Press to turn the air conditioner unit on or off.
- MODE Button: Cycles through available operating modes (e.g., Cool, Heat, Fan, Dry, Auto).
- FAN Button: Adjusts the fan speed (e.g., Low, Medium, High, Auto).
- Temperature Adjustment Buttons (▲ / ▼): Use these buttons to increase or decrease the desired temperature setting. The display shows temperature in Fahrenheit.
Keypad Lock/Unlock Feature:
To prevent accidental changes to settings, the remote control features a keypad lock function.
- To lock the keypad: Press and hold the Temperature Up (▲) and Temperature Down (▼) buttons simultaneously for a few seconds. A lock icon may appear on the display.
- To unlock the keypad: Press and hold the Temperature Up (▲) and Temperature Down (▼) buttons simultaneously again for a few seconds. The lock icon should disappear.
4. Compatibility
This uehba YAP1F replacement remote control is compatible with a wide range of GREE Air Conditioner models, including but not limited to:
- GMV-N71G/A2A-K, GMV-N22G/A4A-K, GMV-N28G/A4A-K, GMV-N36G/A4A-K, GMV-N45G/A4A-K, GMV-N50G/A4A-K, GMV-N56G/A4A-K, GMV-N63G/A4A-K, GMV-N71G/A4A-K, GMV-N22G/A8A-K, GMV-N28G/A8A-K, GMV-N36G/A8A-K, GMV-N45G/A8A-K
- GMV-N63G/A2A-d, GMV-N71G/A2A-d, GMV-N22G/A4A-d, GMV-N28G/A4A-d, GMV-N36G/A4A-d, GMV-N45G/A4A-d, GMV-N50G/A4A-d, GMV-N56G/A4A-d, GMV-N63G/A4A-d, GMV-N71G/A4A-d, GMV-N22G/A8A-d, GMV-N28G/A8A-d, GMV-N36G/A8A-d
- CM300N0070, CM500N0380, CM500N0390, CM500N0400, CM500N0410, CM500N0420, CM500N0430, CM500N0440, CM500N0450, CM500N0460, CM500N0470, CM500N0480, CM500N0490, CM500N0500, CM500N0660, CM500N0610, CM500N0620, CM500N0630, CM500N0640, CM500N0600
- CM800N3610, CM800N3620, CM800N3630, CM800N3640, CM800N3740, CM810N1220, CM810N1020, CM810N0260, CM810N1230, CM810N0270, CM800N3560, CM810N0010, CM810N0020, CM800N3570, CM810N0030, CM800N3580, CM810N0040, CM810N0050
If your original remote control is YAP1F, YV1L1, YB1F2, or YB1FA, this replacement remote should be compatible.
5. Key Features
The uehba YAP1F remote control offers the following features:
- Pre-setting: No programming or pairing required. Works right out of the box.
- Fahrenheit Display: Temperature readings are exclusively in Fahrenheit.
- Strong Signal: Ensures reliable communication with your air conditioner.
- Durable Construction: Made with ABS material for longevity.
- Soft Buttons: Designed for comfortable and responsive tactile feedback.
Image 5.1: Visual representation of the remote control's key features, including durability, strong signal, ABS material, and soft buttons.
6. Troubleshooting
If you encounter issues with your remote control, please refer to the following common solutions:
| Problem | Solution |
|---|---|
| Remote is unresponsive. | Check if the batteries are inserted correctly and have sufficient power. Replace with new AAA batteries if necessary. Ensure there are no obstructions between the remote and the air conditioner's receiver. |
| Keypad buttons are not working. | The keypad may be locked. Press and hold the Temperature Up (▲) and Temperature Down (▼) buttons simultaneously for a few seconds to unlock it. |
| Air conditioner does not respond to commands. | Verify that the remote control is pointed directly at the air conditioner unit. Ensure the air conditioner is powered on. Confirm that your GREE model is listed in the compatibility section. |
| Temperature display is incorrect. | This remote control displays temperature only in Fahrenheit. If you require Celsius, this remote is not suitable. |
7. Specifications
| Brand | uehba |
| Model Number | YAP1FB2F |
| Compatible Remote Types | YAP1F, YV1L1, YB1F2, YB1FA |
| Battery Type | 2 x AAA Alkaline batteries (not included) |
| Connectivity Technology | Infrared |
| Maximum Range | 10 Meters (approximately 33 feet) |
| Item Weight | 97 Grams |
| Item Dimensions (L x W x H) | 6.43" x 2.08" x 1.01" |
| Color | White |
| Special Feature | Pre-setting, no programming required |
8. Warranty and Support
This uehba remote control comes with a 1-year warranty from the date of purchase.
For warranty claims, technical assistance, or any questions regarding the operation of your remote control, please contact the seller directly through your purchase platform. Please provide your order number and a detailed description of the issue for prompt support.