Linkidea CUP-008-01
Linkidea 7oz (200ml) Mini Water Bottle User Manual
Model: CUP-008-01 | Brand: Linkidea
Product Overview
This Linkidea 7oz (200ml) Mini Water Bottle is a compact, vacuum-insulated stainless steel container designed for both hot and cold beverages. Its small size makes it ideal for portability, fitting easily into handbags, purses, and pockets.
Key Features:
- Thermo is made of 304 liners and 201 outer stainless steel, vacuum insulation design, which keeps beverages hot for 8 hours or cold for 12 hours.
- Insulated stainless steel water bottle cap is equipped with a silicone sealing ring, without worrying about spills.
- Water flask are small enough, and easily put into pockets, backpacks, purses, gym bags or suitcases, etc.
- 7 Ounces (200ml) cute bottle for coffee, tea, milk, juice, cappuccino, latte, cocoa, etc. Good for home and travel.
- Package contents: Mini cute water bottle x 1
Product Components
Figure 1: Internal components of the Linkidea Mini Water Bottle. The bottle features a 304 stainless steel interior, a silicone bottom for stability, and a leak-proof lid with a silicone sealing ring.
Setup and First Use
- Unpack: Carefully remove the water bottle from its packaging.
- Initial Cleaning: Before first use, wash the bottle and lid thoroughly with warm water and mild soap. Rinse completely.
- Drying: Allow all components to air dry completely before reassembling.
Operating Instructions
Filling the Bottle:
- Unscrew Lid: Twist the lid counter-clockwise to remove it from the bottle.
- Pour Liquid: Carefully pour your desired hot or cold beverage into the bottle. Do not overfill; leave a small space at the top to prevent spills when closing.
- Secure Lid: Place the lid back onto the bottle and twist clockwise until it is tightly sealed. Ensure the silicone sealing ring is properly seated to prevent leaks.
Video 1: Demonstration of opening, inspecting, and filling the Linkidea Mini Water Bottle. This video highlights the ease of use and the secure sealing mechanism.
Temperature Retention:
The vacuum insulation design helps maintain beverage temperature. Hot drinks can stay warm for up to 8 hours, and cold drinks can remain chilled for up to 12 hours.
Figure 2: The bottle's insulation capabilities, designed to keep contents hot for up to 8 hours.
Portability:
The compact size of the bottle allows for easy transport in various bags and pockets.
Figure 3: The mini thermo bottle is designed to be easily carried in a handbag or pocket.
Maintenance and Care
To ensure the longevity and hygiene of your Linkidea Mini Water Bottle, follow these care instructions:
- Cleaning: The bottle is dishwasher safe. For best results, hand wash with warm, soapy water, especially the lid and sealing ring, to prevent residue buildup.
- Drying: Always ensure the bottle and lid are completely dry before storing to prevent odors or mold.
- Avoid Abrasives: Do not use abrasive cleaners or scrubbers that could scratch the stainless steel or exterior finish.
- Storage: Store with the lid off or slightly ajar to allow air circulation.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bottle leaks | Lid not tightened properly; silicone ring misplaced or damaged. | Ensure lid is screwed on tightly. Check that the silicone sealing ring is correctly seated. If damaged, contact support for replacement. |
| Beverage does not stay hot/cold | Lid not sealed; vacuum insulation compromised. | Verify the lid is securely closed. If the issue persists, the vacuum seal may be compromised, and the bottle may need replacement. |
| Unpleasant odor inside bottle | Improper cleaning or drying. | Wash thoroughly with warm, soapy water and a bottle brush. Rinse well and allow to air dry completely. For stubborn odors, a mixture of baking soda and water can be used. |
Specifications
| Attribute | Detail |
|---|---|
| Brand | Linkidea |
| Model Name | CUP-008-00 |
| Item Model Number | CUP-008-01 |
| Capacity | 7 Ounces (200ml) |
| Color | White |
| Material | Stainless Steel (304 liner, 201 outer) |
| Product Dimensions | 2.17"W x 5.5"H |
| Item Weight | 4.9 ounces (140 Grams) |
| Special Feature | Mini, Dishwasher Safe, Keep Hot and Cold |
| Cap Type | Screw Cap with Silicone Seal |
| Country of Origin | China |
Figure 4: Detailed dimensions of the 7oz (200ml) Linkidea Mini Water Bottle.
Warranty and Support
For warranty information or product support, please contact Linkidea customer service through the retailer where the product was purchased or visit the official Linkidea website. Please retain your proof of purchase for warranty claims.
Contact Information: Refer to your product packaging or the retailer's website for the most current contact details.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.