Conair GSP201AMZ

Download PDF
Contents

Conair SteamStylist 3-in-1 Steam, Press and Iron Steamer Instruction Manual

Model: GSP201AMZ

1. Introduction

The Conair SteamStylist 3-in-1 Steam, Press and Iron Steamer is a versatile garment care tool designed to efficiently remove wrinkles and refresh clothing. This innovative device combines the functions of steaming, pressing, and ironing, offering convenience for home, office, or travel use.

Conair SteamStylist 3-in-1 Steamer in Midnight Blue
Figure 1: Conair SteamStylist 3-in-1 Steam, Press and Iron Steamer.

The SteamStylist features cutting-edge 360° steam-and-press technology with heated ceramic-coated aluminum plates, allowing for efficient wrinkle removal and crisp garment finishing. It includes a fabric shaver, an extra water tank, and a storage bag for enhanced portability and utility.

2. Package Contents

Verify that all components are present in your package:

  • Conair SteamStylist 3-in-1 Steamer
  • Fabric Shaver
  • Extra Water Tank
  • Storage / Travel Bag
Conair SteamStylist kit including steamer, fabric shaver, extra water tank, and storage bag
Figure 2: The complete Conair SteamStylist Garment Care Kit.

The kit provides everything needed for comprehensive garment care, whether at home or on the go.

3. Setup

3.1 Filling the Water Tank

Before first use, or when the water level is low, fill the removable water tank. For optimal performance and to prevent mineral buildup, it is recommended to use distilled water.

  1. Ensure the steamer is unplugged and cool.
  2. Remove the water tank from the main unit.
  3. Open the rubber stopper on the tank.
  4. Fill the tank with distilled water up to the MAX fill line.
  5. Securely close the rubber stopper and reattach the tank to the steamer unit.
Close-up of the Conair SteamStylist showing the removable water tank being filled
Figure 3: Filling the removable water tank with water.

The extra water tank can be pre-filled for quick refills during extended use.

4. Operating Instructions

4.1 Powering On and Heat Settings

  1. Plug the steamer into a power outlet.
  2. Press the power button to turn the unit on. The indicator light will illuminate.
  3. Allow approximately 30 seconds for the steamer to heat up.
  4. Select your desired steam setting: Normal for most garments or Turbo for stubborn wrinkles. The steamer can also be used in a dry mode without steam.

4.2 Steam, Press, and Iron Modes

The SteamStylist offers three versatile functions:

  • Steaming: Hold the steamer upright or horizontally and direct the steam towards the garment. The 360° steam-and-press technology allows for versatile use at any angle.
  • Pressing: The ceramic-coated aluminum plates can be locked together to press both sides of a garment simultaneously, effectively cutting ironing time in half. This is ideal for collars, pleats, and sleeves.
  • Ironing: Use the heated plates like a traditional iron to smooth out wrinkles on a flat surface.
Conair SteamStylist illustrating 3-in-1 functions: Steaming, Pressing, and Ironing
Figure 4: The 3-in-1 solution for garment care.
Conair SteamStylist pressing a garment, highlighting 30-second heat-up and dual-side pressing
Figure 5: Pressing both sides of a garment simultaneously for efficiency.
Conair SteamStylist being used to steam curtains, demonstrating horizontal, vertical, and angled use
Figure 6: The steamer can be used horizontally, vertically, or at any angle.

Video 1: Overview of the Conair Steam Stylist and its features.

4.3 Using the Fabric Shaver

The included fabric shaver can be used to gently remove pills and lint from various types of materials, helping to keep your garments looking new.

5. Care and Maintenance

Proper care ensures the longevity and optimal performance of your SteamStylist.

  • Cleaning: Ensure the unit is unplugged and completely cool before cleaning. Wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners.
  • Water Tank: Empty the water tank after each use to prevent mineral buildup and odors. If using tap water, periodic descaling may be necessary.
  • Storage: Store the steamer in a cool, dry place. Use the provided storage bag for convenient and protected storage, especially when traveling.

6. Troubleshooting

If you encounter issues with your Conair SteamStylist, refer to the following common problems and solutions:

  • No Steam: Ensure the water tank is filled and properly seated. Check that the unit is plugged in and powered on, and allow sufficient time for heating.
  • Water Leakage/Dripping: Ensure the water tank stopper is securely closed and the tank is correctly inserted. Avoid tilting the steamer excessively during use.
  • Insufficient Steam Power: Check the selected steam setting (Normal vs. Turbo). Ensure the water tank is adequately filled.
  • Wrinkles Not Removing: For stubborn wrinkles, use the Turbo steam setting or utilize the pressing/ironing function with the ceramic plates. Ensure the fabric is suitable for steaming/ironing.

If problems persist, contact customer support.

7. Product Specifications

FeatureSpecification
BrandConair
Model NumberGSP201AMZ
ColorMidnight Blue
Item Weight1.5 pounds
Product Dimensions13 x 2.2 x 0.1 inches
Wattage1000 watts
Heat Time30 Seconds
Included ComponentsExtra Water Tank, Fabric Shaver, Storage / Travel Bag
UPC074108502384

8. Warranty Information

The Conair SteamStylist is backed by a manufacturer's warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the documentation included with your product or visit the official Conair website.

Extended protection plans may also be available for purchase:

  • 3-Year Protection Plan
  • 4-Year Protection Plan
  • Complete Protect: One plan covers all eligible past and future purchases

9. Customer Support

For further assistance, product inquiries, or to access additional resources, please visit the official Conair Store:

Visit the Conair Store on Amazon

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.