Behringer B1C 200W All-in-One Portable PA Bluetooth Speaker

Introduction

The Behringer B1C is a versatile 200W All-in-One Portable PA Bluetooth Speaker designed for superior sound quality and portability. Featuring a Class-D power amplifier, built-in Reverb effect, and Bluetooth connectivity, it is suitable for various applications from small venues to presentations. This manual provides essential information to help you set up, operate, and maintain your B1C speaker.

Figure 1: Behringer B1C Portable PA Speaker

Important Safety Instructions

Please read and follow all safety instructions before operating the device. Keep this manual for future reference.

• Do not use this apparatus near water.
• Clean only with dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding-type plug.
• Protect the power cord from being walked on or pinched.
• Only use attachments/accessories specified by the manufacturer.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel.

Key Features

• Superior Sound: 6.5" woofer and 1" dome tweeter for clear audio with a wide frequency response (60 Hz to 20 kHz).
• Ultimate Portability: Lightweight (15.9 lbs) and compact design with a built-in battery for extended performance.
• Powerful Performance: 200W Class-D amplifier with short circuit, open circuit, and thermal protection.
• Versatile Connectivity: 2x XLR/TRS combo jacks, 3.5mm aux input, and Bluetooth 5.3 for various audio sources.
• Enhanced Audio Control: Intuitive controls for volume, reverb, bass, and treble EQ adjustments, plus a high/low pass crossover.

What's in the Box

• Behringer B1C 200W All-In-One Portable PA Bluetooth Speaker
• Standard IEC Power Cord

Controls and Connections

The Behringer B1C features a comprehensive control panel on its rear, allowing for flexible audio input and precise sound shaping.

Figure 2: Rear Control Panel Overview

Input Section (Input A & Input B)

• XLR/TRS Combo Jacks: Accept XLR connectors for microphones or 1/4" TRS/TS connectors for line-level instruments (e.g., keyboards, guitars with active pickups).
• BASS Control: Adjusts the low-frequency response for the respective input.
• TREBLE Control: Adjusts the high-frequency response for the respective input.
• VOLUME Control: Sets the input level for the respective channel.
• CLIP LED: Illuminates when the input signal is too high, indicating potential distortion. Reduce the input volume if this LED lights up frequently.

Master Section

• REVERB Control: Adjusts the amount of reverb effect applied to the overall mix.
• PAIR/LINK Button: Used for Bluetooth pairing and linking two B1C speakers for stereo operation.
• AUX IN (3.5mm): Stereo input for connecting external audio devices like smartphones or MP3 players.
• LINE OUT (XLR): Provides a balanced output of the mixed audio signal for connecting to another PA system or recording device.
• VOLUME (AUX): Controls the volume level of the Aux input.

Power Section

• AC IN: Connects the supplied IEC power cord.
• ON/OFF Switch: Powers the unit on or off.
• POWER LED: Indicates the power status of the unit.

Setup Guide

Unpacking

Carefully remove the speaker from its packaging. Inspect the unit for any signs of damage that may have occurred during transit. Retain the original packaging for future transport or storage.

Power Connection

1. Ensure the B1C's ON/OFF switch is in the 'OFF' position.
2. Connect the supplied IEC power cord to the AC IN socket on the rear panel of the speaker.
3. Plug the other end of the power cord into a suitable AC power outlet.

Initial Placement

Place the B1C speaker on a stable, flat surface or mount it on a compatible speaker stand. Ensure adequate ventilation around the unit to prevent overheating.

Connecting Audio Sources

• Microphones/Instruments: Connect microphones or instruments to the XLR/TRS combo jacks (Input A or Input B).
• External Devices (Aux): Connect smartphones, tablets, or other audio players to the 3.5mm AUX IN jack using a stereo audio cable.

Operation

Powering On/Off

1. Before powering on, ensure all volume controls are set to their minimum position.
2. Flip the ON/OFF switch to the 'ON' position. The POWER LED will illuminate.
3. To power off, first reduce all volumes, then flip the ON/OFF switch to 'OFF'.

Bluetooth Pairing

1. Turn on the B1C speaker.
2. Press and hold the PAIR/LINK button until the Bluetooth indicator starts flashing, indicating it's in pairing mode.
3. On your Bluetooth-enabled device (e.g., smartphone, tablet), search for available Bluetooth devices and select "Behringer B1C".
4. Once paired, the Bluetooth indicator will glow solid. You can now stream audio wirelessly to the speaker.

Using Microphones and Instruments

1. Connect your microphone or instrument to Input A or Input B.
2. Slowly increase the VOLUME control for the respective input.
3. Adjust the BASS and TREBLE controls to achieve your desired tone.
4. Monitor the CLIP LED; if it flashes frequently, reduce the input volume to prevent distortion.

Adjusting Sound

• Reverb: Turn the REVERB knob clockwise to add more spatial effect to your sound.
• EQ: Use the BASS and TREBLE controls on each input channel to fine-tune the low and high frequencies.
• Overall Volume: Adjust the individual channel volumes and the AUX volume to balance the mix.

Maintenance and Care

• Cleaning: Disconnect the power before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or aerosols.
• Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
• Handling: Avoid dropping or subjecting the speaker to strong impacts. Use the integrated handle for transport.
• Ventilation: Ensure ventilation openings are clear of dust and debris to prevent overheating.

Troubleshooting

Technical Specifications

Warranty and Support

Behringer products are designed for reliability and performance. For detailed warranty information and technical support, please refer to the official Behringer website or contact your local distributor. Keep your purchase receipt as proof of purchase for any warranty claims.