Effireli YK-QT1D
Effireli QT1D Replacement Remote Control User Manual
For Soniq TV Models
Introduction
This manual provides instructions for the Effireli QT1D replacement remote control, designed for various Soniq TV models. This remote control requires no programming or setup; it is ready for use upon battery installation. Please refer to this guide for proper operation, maintenance, and troubleshooting.

Figure 1: Effireli QT1D Replacement Remote Control
Setup
Battery Installation
To prepare your remote control for use, follow these steps to install the batteries:
- Locate the battery compartment on the back of the remote control.
- Slide the battery compartment cover downwards or outwards to open it.
- Insert two AAA batteries (not included), ensuring the positive (+) and negative (-) terminals align correctly with the indicators inside the compartment.
- Slide the battery compartment cover back into place until it clicks securely.

Figure 2: Battery Compartment
Operating Instructions
The Effireli QT1D remote control is designed for intuitive operation. Simply point the remote towards your Soniq TV and press the desired function button.
Button Layout and Functions

Figure 3: Remote Control Button Layout
| Button | Function |
|---|---|
| POWER | Turns the TV on or off. |
| MUTE | Mutes or unmutes the TV audio. |
| DVD | Switches to DVD input (if applicable). |
| P.MODE / S.MODE | Picture Mode / Sound Mode selection. |
| SUBTITLE / I-II/AUDIO / INFO | Subtitle control, audio language selection, and information display. |
| 0-9 (Number Buttons) | Direct channel selection. |
| FAV | Accesses favorite channels. |
| SLEEP | Sets the sleep timer. |
| PAUSE | Pauses playback. |
| ASPECT | Adjusts the screen aspect ratio. |
| MENU | Opens the TV's main menu. |
| SOURCE | Selects input source (HDMI, AV, etc.). |
| Navigation (Up, Down, Left, Right, OK) | Navigates through menus and confirms selections. |
| EXIT | Exits the current menu or function. |
| EPG | Displays the Electronic Program Guide. |
| VOL +/- | Adjusts the volume level. |
| CH ^/v | Changes channels up or down. |
| SETUP | Accesses setup options. |
| REC / CANCEL | Records content or cancels current action. |
| PLAY/PAUSE, STOP, REWIND, FAST FORWARD (Media Controls) | Controls media playback. |
| USB/SD | Switches to USB/SD input. |
Compatible Models
This Effireli QT1D replacement remote control is compatible with a wide range of Soniq TV models. Please verify your TV model number against the list below to ensure compatibility:
- QT166, QT155S, QT155
- E24Z15B, E23Z13A-AU, E23Z15A-AU, E24Z15B-AU
- E32V15B-AU, E32V15D-AU, E32V16B-AU, E32V17A-AU, E32V17B-AU
- E32W13A-AU, E32W13B-AU, E32W13D-AU
- E40V14A-AU, E40V14B-AU, E40V16A-AU
- E40W13A-AU, E40W13C-AU
- E42V14A-AU, E43V15B-AU, E43V15C-AU, E43V15D-AU
- E48W13A-AU, L32V12B-AU
- E24HZ17B-AU, E32HV18A-AU, E42FV16A-AU, E48FH16A-AU, E55FV16A-AU
- S55UV16A-AU, S55UV16B-AU, S65UX16A-AU
- E24Z15B-AU REVA, E43V15C-AU REV.B, E32HV18A-AU REV.A
- QSL460XTV2, QSL422XT, QSL402XTV2, QSL323CT1, QSL322TV2, QSL322T
- GAR1, QT185
- S55V16A-AU, S55V14B-AU, E48W73A-AU, E55S12A, 51E12A
- L47V12A-AL, P51E12A, L47V12A, L42D11A
- S65UX16A-AU REV.A
Note: If your specific Soniq TV model number is not listed above, or if your original remote control appears significantly different, please contact customer support to confirm compatibility before use.
Maintenance
Proper care will extend the life of your remote control:
- Cleaning: Use a soft, dry cloth to clean the remote control. Do not use liquid cleaners or abrasive materials.
- Battery Replacement: Replace batteries when the remote's response becomes sluggish or stops working. Always replace both batteries at the same time with new ones of the same type.
- Storage: If the remote control will not be used for an extended period, remove the batteries to prevent leakage and damage. Store in a cool, dry place.
- Avoid Exposure: Do not expose the remote control to direct sunlight, extreme temperatures, high humidity, or water.
Troubleshooting
If you encounter issues with your remote control, try the following solutions:
- Remote Not Responding:
- Ensure batteries are inserted correctly with the correct polarity (+/-).
- Replace old batteries with new ones.
- Check if there is a clear line of sight between the remote and the TV's infrared sensor. Remove any obstructions.
- Ensure you are within the effective range of the TV's IR receiver.
- Specific Buttons Not Working:
- Clean the remote control, especially around the non-functioning buttons, to remove any dirt or debris that might be obstructing them.
- If only certain buttons are unresponsive after trying new batteries, the remote may be faulty.
- TV Not Responding to Any Remote:
- Check if the TV itself is powered on and functioning correctly.
- Try using the physical buttons on the TV to confirm it is operational.
- Unplug the TV from the power outlet for a few minutes, then plug it back in to reset it.
If these steps do not resolve the issue, please refer to the Warranty and Support section for further assistance.
Specifications
| Feature | Detail |
|---|---|
| Model Number | YK-QT1D |
| Brand | Effireli |
| Connectivity Technology | Infrared (IR) |
| Compatible Devices | Television (Soniq) |
| Max Number of Supported Devices | 1 |
| Special Feature | No Programming Required |
| Item Weight | 2.82 ounces |
| Package Dimensions | 9.21 x 3.15 x 1.46 inches |
Warranty and Support
Your Effireli QT1D replacement remote control comes with the following assurances:
- Money-Back Guarantee: A 30-day money-back guarantee is provided from the date of purchase.
- Warranty: A 12-month warranty covers manufacturing defects. Returns and exchanges are accepted within this warranty period.
For warranty claims, technical support, or to confirm compatibility for unlisted models, please contact the seller directly. Contact information is typically available through your purchase platform or seller profile.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.