Introduction
Thank you for choosing the DR.PREPARE Boot and Shoe Dryer. This device is designed to efficiently dry and deodorize various footwear and gear, including boots, shoes, gloves, hats, and socks. Featuring three drying modes, an ozone deodorizer, and adjustable settings, it provides a versatile solution for maintaining your items. Please read this manual thoroughly before operation to ensure safe and optimal performance.
Important Safety Instructions
To reduce the risk of fire, electric shock, or injury, always follow these basic safety precautions:
- Read all instructions before using the appliance.
- Do not immerse the appliance, cord, or plug in water or other liquids.
- Unplug from outlet when not in use and before cleaning.
- Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner.
- Do not block air vents during operation. Ensure adequate ventilation around the unit.
- Use the appliance only for its intended purpose as described in this manual.
- Keep out of reach of children. Close supervision is necessary when any appliance is used by or near children.
- Place the dryer on a stable, flat, heat-resistant surface.
- Do not use the dryer on items that are dripping wet; wring out excess water first.
- This appliance is equipped with overheat and overcurrent protection for safety.
Product Features
- Three Drying Modes: HIGH TEMP (131-149°F), LOW TEMP (95-113°F), and NO HEAT (natural airflow) for various materials including delicate leather and rubber.
- Enhanced Airflow & 360° Drying: Features more vents and a 60° deep toe reach for comprehensive drying.
- Ozone Deodorizer: Helps eliminate odors and maintain freshness.
- Smart Timer Functions: 99-minute auto-off timer for safety and energy saving, and a 24-hour auto-on timer for pre-warming.
- Adjustable & Foldable Design: Height-adjustable tubes accommodate various item sizes, and the unit folds for easy storage and portability.
- Safety Protections: Constructed with heat-resistant material and includes overheat and overcurrent protection.
Setup
- Unpack the Dryer: Carefully remove the dryer and all packaging materials. Inspect the unit for any damage.
- Place the Unit: Position the dryer on a flat, stable surface with sufficient space around it for air circulation.
- Adjust Drying Tubes: The drying tubes are adjustable. To extend them, gently pull upwards until they click into the desired height (up to 10.8 inches). To pivot the drying heads, rotate them up to 60 degrees for optimal reach into footwear.
Operating Instructions
- Connect to Power: Plug the power cord into a standard electrical outlet. The display will illuminate.
- Place Items on Dryer: Position your shoes, boots, gloves, or other items onto the drying tubes. Ensure the tubes are inserted as far as possible into the items for effective drying.
- Select Drying Mode: Press the 'MODE' button to cycle through the three drying options:
- HIGH TEMP: For quick drying of durable materials (e.g., ski boots, work boots). Temperature range: 131-149°F.
- LOW TEMP: For sensitive materials like leather, rubber, or delicate fabrics. Temperature range: 95-113°F.
- NO HEAT (Natural Airflow): For gentle drying or refreshing without heat.
- Set Timer (Auto-Off): Press the 'TIMER' button to set the desired drying duration, from 0 to 99 minutes. The dryer will automatically shut off once the set time expires.
- Activate Ozone Deodorizer: If your model includes an ozone function, press the 'OZONE' button to activate it. This helps eliminate odors.
- Set Auto-On Timer (Optional): To pre-warm or pre-dry items, you can set an auto-on timer for up to 24 hours. Refer to the specific instructions on the control panel for this advanced feature.
- Start Drying: Once settings are configured, the dryer will begin operation.
- Completion: When the drying cycle is complete, remove your items and unplug the dryer.
Maintenance
- Cleaning: Ensure the dryer is unplugged and completely cool before cleaning. Wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or immerse the unit in water.
- Storage: When not in use, fold the drying tubes down for compact storage. Store the dryer in a cool, dry place, away from direct sunlight and moisture.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dryer does not turn on. | No power, loose connection, or unit malfunction. | Check if the power cord is securely plugged into a working outlet. Try a different outlet. If the issue persists, contact customer support. |
| Items are not drying effectively. | Incorrect mode selected, blocked vents, or items are too wet. | Ensure the correct drying mode (HIGH TEMP/LOW TEMP) is selected. Check that air vents are not obstructed. Wring out excess water from items before placing them on the dryer. |
| Unusual odor during operation. | New unit odor, or items being dried have strong odors. | A slight odor may occur during initial use; this is normal. Ensure the ozone function is active for odor elimination from items. If the odor is persistent or burning, unplug immediately and contact support. |
| Timer not working correctly. | Incorrect timer setting. | Review the operating instructions for setting the auto-off and auto-on timers. Ensure the desired time is correctly entered. |
Specifications
| Feature | Detail |
|---|---|
| Brand | DR.PREPARE |
| Model Number | 2024 |
| ASIN | B0DF2PPYWY |
| UPC | 840315229730 |
| Drying Modes | High Temp, Low Temp, No Heat |
| High Temp Range | 131-149°F |
| Low Temp Range | 95-113°F |
| Timer | 0-99 min (Auto-off), 0.5-24 H (Auto-on) |
| Material | Metal, Plastic |
| Color | Black |
| Package Dimensions | 29.5 x 18.9 x 10.6 cm |
| Item Weight | 1.1 kg |
Warranty and Support
The DR.PREPARE Boot and Shoe Dryer is backed by a 12-month warranty from the date of purchase. This warranty covers manufacturing defects and issues arising from normal use.
For warranty claims, technical support, or any questions regarding your product, please contact DR.PREPARE customer service through the retailer's platform or the official DR.PREPARE website. Please have your model number (2024) and proof of purchase ready when contacting support.
