1. Product Overview
The Branch Adjustable Ergonomic Headrest Attachment is designed to enhance the comfort and support of your Branch Ergonomic Chair. It provides customizable head and neck support, contributing to improved posture and reduced discomfort during extended periods of sitting.
Image 1.1: Branch Ergonomic Headrest Attachment (Baltic)
This headrest is specifically engineered for compatibility with the Branch Ergonomic Chair, ensuring a seamless fit and optimal performance. Its breathable mesh construction promotes airflow, keeping you cool and comfortable.
2. Safety Information
WARNING: This product requires assembly. Always follow the assembly instructions carefully to avoid injury. Keep fingers away from moving parts when adjusting the height. Do not exceed the maximum weight capacity to ensure stability and safety.
Ensure all connections are secure after assembly and before use. Regularly inspect the headrest for any signs of wear or damage. Discontinue use if any damage is observed and contact customer support.
3. Package Contents
Verify that all components are present before beginning assembly:
- Branch Ergonomic Headrest Attachment
- Allen Key (for assembly)
- Assembly Instructions
Image 3.1: Headrest Attachment Component
4. Installation Instructions
The headrest attachment is designed for easy installation. Please follow these steps carefully:
- Prepare Your Chair: Ensure your Branch Ergonomic Chair is in an upright and stable position.
- Locate Attachment Point: Identify the designated slot at the top of your Branch Ergonomic Chair's backrest where the headrest will attach.
- Insert Headrest: Align the base of the headrest attachment with the slot on the chair's backrest. Gently slide the headrest into place until it is fully seated.
- Secure with Allen Key: Use the provided Allen key to tighten any securing screws, if present, to firmly attach the headrest. Refer to the specific diagrams in the included paper instructions for exact screw locations.
- Verify Stability: Once installed, gently test the headrest to ensure it is securely attached and does not wobble.
Image 4.1: Headrest Attachment Point
5. Adjustments and Usage
The Branch Ergonomic Headrest is designed for adjustable support to suit your individual needs:
- Height Adjustment: The headrest can be adjusted vertically to find the optimal position for supporting your head and neck. To adjust, grasp the headrest firmly and slide it up or down to your desired height.
- Optimal Positioning: Position the headrest so that it comfortably supports the natural curve of your neck and the base of your head when you lean back. This helps to alleviate upper-back, shoulder, and neck discomfort.
Image 5.1: Proper Headrest Adjustment for Comfort
6. Care and Maintenance
To ensure the longevity and appearance of your headrest attachment, follow these care guidelines:
- Cleaning: Wipe the mesh and frame with a soft, damp cloth. For stubborn spots, a mild soap solution can be used, followed by wiping with a clean, damp cloth. Avoid abrasive cleaners or harsh chemicals.
- Inspection: Periodically check all connections and moving parts to ensure they are secure and functioning correctly.
- Avoid Overloading: Do not place excessive weight or pressure on the headrest, as this may cause damage.
7. Troubleshooting
If you encounter any issues with your headrest attachment, refer to the following common solutions:
- Headrest feels loose or wobbly: Ensure all securing screws are tightened. If the issue persists, remove and re-install the headrest, making sure it is fully seated in the attachment slot.
- Difficulty adjusting height: Check for any obstructions in the adjustment mechanism. Ensure you are applying firm, even pressure when sliding the headrest.
- Unusual noises (e.g., rattling): Verify that the headrest is securely installed. If rattling occurs, ensure no foreign objects are lodged in the attachment mechanism. If the issue persists after re-installation, contact customer support.
8. Product Specifications
Image 8.1: Product Dimensions and Details
| Feature | Detail |
|---|---|
| Brand | Branch |
| Model Name | Ergonomic Headrest |
| Model Number | 13-43-00-56 |
| Color | Baltic |
| Material | Aluminum frame, Nylon Mesh |
| Product Dimensions (D x W x H) | 5" x 14" x 14" |
| Item Weight | 2 Pounds |
| Height Adjustment Range | 2.25 inches (7" - 9.5" from top of chair back) |
| Required Assembly | Yes |
| Compatibility | Only with Branch Ergonomic Chair |
9. Contact and Support
For further assistance, warranty information, or to report any issues, please contact Branch customer support:
- Manufacturer: Branch
- Website: Visit the Branch Store on Amazon
Please have your model number (13-43-00-56) and purchase date available when contacting support.