1. Important Safety Information
Read all instructions carefully before installation and use. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Always disconnect power at the service panel before wiring or servicing the unit. Ensure the main power breaker is OFF.
- All electrical wiring must be performed by a qualified electrician in accordance with all applicable local codes and standards, including fire-rated construction codes and standards.
- This unit is designed for general ventilating use only. Do not use to exhaust hazardous or explosive materials and vapors.
- To reduce the risk of fire or electrical shock, do not expose the fan to water or moisture.
- Never put your hands or other objects into the fan while it is operating.
- Ensure the installation location provides adequate space for the fan housing and proper ventilation.
WARNING: To reduce the risk of fire, electric shock, or injury to persons, observe the following:
- Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer.
- Before servicing or cleaning unit, switch power off at service panel and lock the service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.
2. Product Overview
The Akicon Bathroom Exhaust Fan with Light provides efficient ventilation, adjustable LED lighting, and a nightlight function, all controlled by a smart humidity sensor switch. It is designed to effectively remove moisture and odors from bathrooms, ensuring a fresh and healthy environment.
Image: Akicon Bathroom Exhaust Fan with Light (Black, Round)
3. Specifications
| Feature | Specification |
|---|---|
| Airflow Rate | 110 CFM |
| Noise Level | 2.0 Sones |
| LED Light Power | 15W |
| LED Light Color Temperature | 2700K / 4000K / 5500K (Adjustable) |
| Nightlight Output | 150lm (Yellow and Blue options) |
| Lumen Output (Main Light) | 1000lm |
| Voltage | 120V |
| Power Consumption (Fan) | 31W |
| Housing Dimensions | 7.5" (L) x 7.25" (W) x 5.75" (H) |
| Ceiling Opening | 7-1/2" (L) x 7-1/4" (W) |
| Light Cover Dimension | Ø13-1/2" |
| Duct Diameter | Ø4" |
| Installation Type | Ceiling Mount (Wall-mounted in description, but images and video show ceiling. Assuming ceiling mount is primary.) |
| Certifications | HVI, cETL, Energy Star Listed |
| Material | Metal, Plastic |
This fan is suitable for rooms up to 100 sq. ft.
Image: Fan dimensions and room coverage
4. Installation
Proper installation is crucial for the safe and efficient operation of your exhaust fan. Please follow these steps carefully. If you are unsure about any part of the installation, consult a qualified electrician.
4.1 Pre-Installation Steps
- Disconnect Power: Before beginning any work, ensure the power supply to the installation area is turned off at the circuit breaker.
- Prepare Opening: Cut an exact opening in your ceiling. The recommended opening size is 7-1/2" (L) x 7-1/4" (W). Use the fan housing to mark the precise location.
4.2 Installation Procedure (Attic Access)
If you have attic access, follow these steps:
- Secure Housing: Screw the fan housing into the ceiling joist.
- Connect Ductwork: Attach the duct to the connector on the fan housing using HVAC tape to ensure a secure and airtight seal.
- Electrical Connections: Connect all electrical wiring according to local codes.
4.3 Installation Procedure (No Attic Access)
If you do not have attic access, follow these steps:
- Remove Motor Unit: Unscrew and remove the motor unit from inside the fan housing using a Phillips screwdriver.
- Connect Ductwork: Connect the vent duct to the ceiling opening.
- Electrical Connections: Connect all electrical wiring.
- Insert Housing: Hold the housing up and slide it into the ceiling opening. The integrated clips will help level the housing.
- Secure Housing: Drive screws into the ceiling joists to secure the housing firmly.
- Reinstall Motor Unit: Install the motor unit back into the housing and plug it into the receptacle.
- Connect Light/Nightlight: Plug the light and nightlight connectors into their respective receptacles.
- Attach Grille: Squeeze the springs on the grille cover and gently push the grille into place until it is flush with the ceiling.
4.4 Installation Video Guide
Video: Official installation guide for the Akicon Bathroom Exhaust Fan with Light, Model 110CFM 2.0Sones. This video demonstrates the key steps for safe and proper setup, including wiring and securing the unit.
5. Operation
Your Akicon Bathroom Exhaust Fan features advanced controls for optimal comfort and air quality.
5.1 Humidity Sensor Control
The integrated humidity sensor automatically detects changes in room humidity levels. When humidity exceeds a preset threshold, the fan activates to remove excess moisture. Once humidity returns to normal, the fan automatically turns off.
- Humidity Sensitivity Levels: Choose from 5 levels (90%, 80%, 70%, 60%, 50%) to customize activation.
- Timer Intervals: Set the fan to run for 5, 15, 30, 45, or 60 minutes after activation.
- Manual Override: You can manually turn the fan on or off using the switch, overriding the humidity sensor as needed.
5.2 Dimmable LED Light and Nightlight
The fan includes a 15W dimmable LED light with adjustable color temperature and a separate nightlight function.
- Color Temperature Settings: Cycle through 2700K (warm white), 4000K (neutral white), and 5500K (cool white) to set your preferred ambiance.
- Nightlight Options: The integrated nightlight offers both yellow and blue color options for gentle illumination.
Image: Adjustable LED light color temperatures (2700K, 4000K, 5500K)
Image: Product features of the humidity sensor switch
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your exhaust fan.
- Power Disconnection: Always turn off the power supply at the circuit breaker before performing any maintenance or cleaning.
- Grille Cleaning: Remove the grille cover by gently squeezing the spring clips. Wash the grille with mild soap and water, rinse thoroughly, and dry completely before reattaching.
- Fan Blade Cleaning: Carefully wipe the fan blades and interior of the housing with a damp cloth to remove dust and debris. Avoid getting water into electrical components.
- Reassembly: Once all parts are clean and dry, reassemble the fan and restore power.
7. Troubleshooting
If you encounter issues with your Akicon Bathroom Exhaust Fan, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not operate | No power supply; Loose wiring; Motor malfunction | Check circuit breaker; Verify all wiring connections; Contact customer support if motor is faulty. |
| Light does not turn on | Loose light connector; Faulty LED module | Ensure light connector is securely plugged in; Contact customer support for LED replacement. |
| Excessive noise during operation | Loose mounting screws; Debris in fan blades; Motor issue | Check and tighten mounting screws; Clean fan blades; Contact customer support. |
| Poor ventilation/humidity remains high | Blocked ductwork; Incorrect humidity sensor setting; Fan undersized for room | Check ductwork for obstructions; Adjust humidity sensitivity level; Ensure fan CFM matches room size. |
8. DIY Grille Style Change (3-Layer to 2-Layer)
The fan grille is designed to be customizable, allowing you to change its appearance from a three-layer to a two-layer style to better match your bathroom aesthetics.
Procedure:
- Remove Grille: Gently pull down the grille cover to detach it from the fan housing.
- Access Screws: On the back of the grille, locate the six long screws securing the layers.
- Replace Screws: Remove the six long screws and replace them with the shorter screws provided in the package.
- Reposition Spring Clips: Remove the spring clips from their current position and reinstall them onto the shorter posts (piles) to accommodate the reduced number of layers.
- Reattach Grille: Once the changes are made, reattach the grille cover to the fan housing.
Image: DIY grille style change from 3-layers to 2-layers
9. Warranty and Support
For warranty information, please refer to the documentation included with your product or visit the official Akicon website. If you require technical assistance, have questions about installation, or need to report a defect, please contact Akicon customer service.
Akicon Customer Service: Refer to your product packaging or the Akicon website for contact details.
