Guide Gear 16' Swivel Ladder Tree Stand Blind Instruction Manual

1. Introduction

This manual provides essential instructions for the safe and effective use of your Guide Gear 16' Swivel Ladder Tree Stand Blind. This blind is designed to offer concealment and protection from the elements when used with the compatible Guide Gear 16' Swivel Ladder Tree Stand (sold separately, Amazon ASIN B01GU19NV4).

Please read all instructions carefully before assembly and use. Retain this manual for future reference.

2. Safety Information

WARNING: Failure to follow these safety instructions may result in serious injury or death.

• Always ensure the tree stand is securely installed and stable before attaching or using the blind.
• Inspect the blind and all attachment points for wear, damage, or loose connections before each use. Do not use if damaged.
• This blind is intended for concealment and weather protection. It is not a structural component of the tree stand.
• Be aware of wind conditions. Strong winds can affect the stability of the blind and stand. Consider removing the blind in high winds.
• Always use a full-body harness and safety line when ascending, descending, and occupying a tree stand.
• Do not exceed the weight capacity of your tree stand.
• Keep all parts of your body, clothing, and equipment inside the blind while in use.

3. Package Contents

Verify that all components are present before beginning assembly:

• Blind Fabric Cover (Dead Leaf Camo pattern)
• Support Frame Components
• Attachment Straps/Hardware
• Instruction Manual

Note: The Guide Gear 16' Swivel Ladder Tree Stand is sold separately and is required for use with this blind.

4. Setup and Assembly

This blind is designed for easy attachment to the Guide Gear 16' Swivel Ladder Tree Stand. Ensure your tree stand is already securely installed according to its own instructions before proceeding.

4.1. Assembling the Blind Frame

1. Unpack all blind components and lay them out on a clean, flat surface.
2. Assemble the support frame according to the diagrams provided in the separate tree stand manual or the blind's specific assembly sheet. The frame typically consists of several steel bars that form the top and side structure for the fabric cover.
3. Secure all frame connections using the provided bolts and wing nuts. Ensure all connections are tight and stable.

4.2. Attaching the Blind to the Tree Stand

1. With the tree stand securely in place, carefully position the assembled blind frame onto the platform of the tree stand.
2. Utilize the heavy-duty attachment straps to secure the blind frame to the tree stand's structure. Ensure the straps are threaded through the designated loops on the blind frame and around the stand's frame.
3. Tighten all straps firmly to eliminate any movement or looseness. The blind should be snug against the stand.
4. Drape the Dead Leaf Camo fabric cover over the assembled frame. The cover features elastic corners or bungee material to help secure it to the frame.
5. Adjust the fabric cover to ensure it is evenly distributed and provides maximum concealment and weather protection.

Figure 1: The Guide Gear 16' Swivel Ladder Tree Stand Blind fully installed on a compatible tree stand.

Figure 2: Front view of the blind, showcasing the camouflage pattern and overall structure.

Figure 3: Side view of the blind, illustrating its profile and how it integrates with the stand.

Figure 4: Rear view of the blind, showing the attachment points and fabric fit.

Figure 5: Detailed view of the Dead Leaf Camo pattern, designed for effective concealment.

4.3. Compatible Tree Stand Overview

The following video provides an overview of the Guide Gear 16' Swivel Ladder Tree Stand, which this blind is designed to complement. Understanding the stand's features can aid in proper blind installation.

5. Operating Instructions

Once the blind is securely installed on your tree stand, it provides an enclosed space for hunting. The fabric cover is water-resistant and features a Dead Leaf Camo pattern for optimal concealment.

• The blind helps to conceal movement and contain scent, enhancing your hunting experience.
• Utilize any integrated windows or openings for visibility and shooting lanes.
• Ensure all openings are properly secured when not in use to maintain concealment and weather protection.

6. Maintenance and Storage

• Cleaning: Clean the fabric cover with a damp cloth and mild soap. Do not use harsh chemicals or abrasive cleaners. Allow to air dry completely before storage.
• Inspection: Regularly inspect the fabric for tears, holes, or signs of wear. Check all straps and buckles for damage or fraying.
• Storage: When not in use, disassemble the blind and store it in a cool, dry place away from direct sunlight and pests. Ensure the fabric is completely dry to prevent mold or mildew.

7. Troubleshooting

8. Specifications

• Model: GGL25-BC
• Compatibility: Guide Gear 16' Swivel Ladder Tree Stand (ASIN B01GU19NV4)
• Material: Rugged water-resistant fabric
• Pattern: Dead Leaf Camo
• Item Package Dimensions: 9.35 x 6.05 x 2.55 inches
• Package Weight: 1.2 Pounds

9. Warranty and Support

For warranty information or product support, please refer to the documentation included with your original purchase or contact Guide Gear customer service directly. Contact details can typically be found on the manufacturer's website or product packaging.