James Martin Vanities 735-M26

Download PDF
Contents

James Martin Vanities Glenbrooke Wall Mirror

Model: 735-M26 (26" W x 40" H, Whitewashed Oak)

Introduction

This manual provides essential instructions for the safe installation, operation, and maintenance of your James Martin Vanities Glenbrooke 735-M26 Wall Mirror. Please read all instructions carefully before beginning installation and retain this manual for future reference.

The Glenbrooke mirror features a transitional rectangular design with a wood frame, 1" bevel cut glass, and is sealed with premium moisture and UV resistant coatings. It is designed for secure wall mounting, either vertically or horizontally.

Safety Information

  • Always handle the mirror with care. Glass can break and cause injury.
  • Ensure the mounting surface is structurally sound and capable of supporting the mirror's weight (approximately 24.5 lbs).
  • Use appropriate wall anchors and screws for your specific wall type (e.g., drywall, plaster, wood studs).
  • Do not overtighten screws, as this can damage the frame or wall.
  • Keep children and pets away from the installation area.
  • If you are unsure about any part of the installation process, consult a qualified professional.

Package Contents

Verify that all components are present before beginning installation:

  • James Martin Vanities Glenbrooke Wall Mirror (1 unit)
  • Mounting Hardware (screws, wall anchors)
James Martin Vanities Glenbrooke 26x40 inch mirror in Whitewashed Oak

Image: The James Martin Vanities Glenbrooke 735-M26 mirror in Whitewashed Oak, showcasing its rectangular shape and wood frame.

Tools Required (Not Included)

  • Pencil
  • Measuring Tape
  • Level
  • Drill
  • Drill Bits (appropriate for wall anchors)
  • Screwdriver (Phillips head recommended)
  • Stud Finder (recommended for secure mounting)

Installation (Setup)

The Glenbrooke mirror features dual sets of recessed keyhole-style hangers, allowing for both vertical and horizontal mounting. Follow these steps for secure installation:

  1. Determine Mounting Orientation: Decide whether you will hang the mirror vertically (40" H x 26" W) or horizontally (26" H x 40" W).
  2. Measure Hanger Spacing: On the back of the mirror, measure the distance between the centers of the two keyhole hangers you intend to use for your chosen orientation. Note this measurement.
  3. Mark Wall Location: Hold the mirror against the wall at the desired height and position. Use a pencil to lightly mark the top center of the mirror.
  4. Mark Screw Locations: From your top center mark, measure down and out to mark the exact locations for your mounting screws, using the hanger spacing measurement obtained in step 2. Use a level to ensure these marks are perfectly horizontal.
  5. Prepare Wall:
    • If mounting into wood studs: Drill pilot holes at the marked locations, slightly smaller than your screws.
    • If mounting into drywall/plaster without studs: Drill holes appropriate for your wall anchors. Insert the wall anchors according to their manufacturer's instructions.
  6. Install Screws: Insert the mounting screws into the prepared holes or anchors, leaving approximately 1/4 inch of the screw head protruding from the wall. Ensure the screw heads are small enough to fit into the keyhole slots but large enough to hold the mirror securely.
  7. Hang Mirror: Carefully lift the mirror and align the keyhole slots on the back with the protruding screw heads. Gently lower the mirror until the screws are seated firmly in the narrow part of the keyhole slots.
  8. Verify Stability: Lightly tug on the mirror to ensure it is securely mounted and does not wobble. Adjust screws if necessary.
James Martin Vanities Glenbrooke mirror installed in a bathroom

Image: The Glenbrooke mirror mounted vertically above a vanity in a bathroom setting, demonstrating its installed appearance.

Operating

This product is a static wall mirror and does not require active operation. Ensure it is securely mounted and used in a manner consistent with its design as a decorative and functional reflective surface.

Care and Maintenance

  • Glass Cleaning: Use a soft, lint-free cloth and a non-abrasive glass cleaner. Spray cleaner onto the cloth, not directly onto the mirror, to prevent liquid from seeping behind the frame. Wipe gently to avoid streaks.
  • Frame Care: Wipe the wood frame with a soft, dry cloth. For stubborn marks, a slightly damp cloth can be used, followed immediately by a dry cloth. Avoid harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the finish.
  • Inspection: Periodically check the mounting hardware to ensure the mirror remains securely attached to the wall.
Close-up of the Whitewashed Oak frame of the Glenbrooke mirror

Image: A detailed view of the Whitewashed Oak wood frame, highlighting the texture and finish.

Troubleshooting

  • Mirror appears crooked: Ensure the mounting screws are level. Remove the mirror, re-level your marks, and adjust screw placement if necessary.
  • Mirror feels loose: Carefully remove the mirror and check if the screws are fully engaged in the keyhole slots. Tighten screws slightly if they are too loose, ensuring not to overtighten. Verify wall anchors are secure.
  • Streaks on glass after cleaning: Use a clean, dry, lint-free microfiber cloth. Ensure glass cleaner is applied to the cloth first, not directly to the mirror. Avoid using too much cleaner.

Specifications

Model Number 735-M26
Brand James Martin Vanities
Dimensions (H x W x D) 40" x 26" x 0.88"
Weight 24.5 lbs
Frame Material Ash Solids
Glass Type 1" Bevel Cut Glass
Finish Whitewashed Oak
Mounting Recessed Keyhole Hangers (Vertical or Horizontal)
UPC 840108977503

Warranty Information

The James Martin Vanities Glenbrooke 735-M26 Wall Mirror is covered under James Martin Vanities' 1-year limited warranty. This warranty covers defects in materials and workmanship under normal use. For specific details regarding warranty coverage and claims, please refer to the official James Martin Vanities warranty policy or contact customer support.

Customer Support

For assistance with installation, parts, or warranty inquiries, please contact James Martin Vanities customer support through their official website or the contact information provided with your purchase. Please have your model number (735-M26) and purchase date available when contacting support.

© 2026 James Martin Vanities. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.