DEERC 1:14 Crawler RC Car User Manual

1. Safety Information

For safe operation of your DEERC RC Car, please observe the following precautions:

• Keep away from naked flame or direct heat source.
• Ensure all components are securely fastened before operation.
• Do not operate in public streets or areas with pedestrian or vehicle traffic.
• Avoid contact with water or excessive moisture to prevent damage to electronic components, despite IPX4 waterproofing.
• Adult supervision is recommended for users under 14 years of age.
• Always turn off the RC car and remote control when not in use.

2. Package Contents

Verify that all items listed below are included in your package:

• 1 x DEERC Heavy-Duty RC Truck
• 2 x 7.4V 1500mAh Batteries
• 1 x Remote Controller
• 1 x Charging Cable
• 1 x Product Manual
• 1 x Screwdriver
• 1 x Spare Parts Kit

Image: All components included in the DEERC 1:14 Crawler RC Car package.

3. Product Features

The DEERC 1:14 Crawler RC Car is engineered for high performance and durability:

• High Speed Performance: Equipped with a powerful brushed RC 390 motor (21,000 RPM) and advanced IPX4 waterproof ESC, achieving speeds up to 48 KM/H.
• Real Hobby Grade Design: Features independent suspension, adjustable metal oil-filled shocks, a 2KG metal servo, full metal gear differentials (front, center, and rear), and metal drive shafts for rugged 4WD performance.
• Cutting-Edge Remote Control Experience: New 4WD desert truck body with bright headlights, top lights, and a specially designed frame for DIY racing. Includes fun flag accessories and a reinforced chassis ready for LED strip upgrades.
• Ultra-smooth Control: Full-function proportional steering and throttle with 2.4GHz radio control, offering a 300-foot range and interference-free performance.
• Advanced Electronic Protection: Overheat protection, anti-jam technology, and low battery voltage cutoff.
• Extended Runtime: Includes two 7.4V large-capacity batteries for up to 40 minutes of continuous runtime.

Image: Visual representation of the upgraded components, highlighting the transition from plastic to metal parts for enhanced durability and performance.

Image: Features such as 4x4 drive, splash-proof electronics, 2.4GHz control, metal driving system, 30A ESC, oil-filled shocks, and metal CVD & Servo.

4. Setup

4.1 Battery Installation

To install the battery in your RC car:

1. Carefully remove the body clips and lift the car body. Note that the headlights are wired to the chassis, so lift gently.
2. Locate the battery compartment on the chassis.
3. Insert one of the provided 7.4V 1500mAh batteries into the compartment.
4. Connect the battery's power connector to the corresponding connector on the ESC. Ensure the connection is secure.
5. Tuck the wires neatly to avoid interference with moving parts.
6. Replace the car body and secure it with the body clips.

4.2 Remote Control Setup

The remote control requires two AA batteries (not included):

1. Open the battery compartment on the back of the remote control.
2. Insert two AA batteries, observing the correct polarity (+/-).
3. Close the battery compartment.
4. Turn on the remote control. The indicator light should blink.
5. Turn on the RC car by pressing and holding the red button on the chassis. The remote control light should stop blinking and become solid, indicating a successful connection.

For a visual guide on setting up the car and remote, refer to the video below:

5. Operating Instructions

5.1 Basic Controls

Use the remote control to operate your RC car:

• Throttle Trigger: Pull the trigger to move forward, push to brake or reverse.
• Steering Wheel: Turn the wheel left or right to steer the car.

5.2 Speed Adjustment

The remote control features a speed adjustment dial:

• Turn the speed dial on the remote control to adjust the maximum speed of the RC car. This is useful for beginners or for operating in confined spaces.

5.3 Driving Tips

Maximize your driving experience with these tips:

• Practice in open areas to get accustomed to the controls.
• The 4x4 drive and independent suspension allow for excellent maneuverability on various terrains, including sand, grass, and gravel.
• Utilize the adjustable metal oil-filled shocks for smoother rides over rough surfaces.

Image: The DEERC RC car is designed for all-terrain versatility, performing well on sand, grass, and other outdoor environments.

6. Maintenance

6.1 Cleaning

Regular cleaning helps maintain performance and longevity:

• After each use, especially in dusty or muddy conditions, clean the car's chassis, wheels, and suspension components.
• Use a soft brush or cloth to remove dirt and debris. Avoid using water directly on electronic components.

6.2 Storage

Proper storage is crucial for battery and component health:

• Store the RC car in a cool, dry place away from direct sunlight and extreme temperatures.
• Remove batteries from both the car and the remote control if storing for extended periods.

6.3 Part Replacement

The DEERC RC car is designed with replaceable parts for extended usability:

• Refer to the Device Explosion Diagram in the included Product Manual for part identification and ordering.
• The spare parts kit includes common replacement items like screws and clips.
• For advanced repairs or component upgrades (e.g., LED strips), consult professional hobby resources or the manufacturer's support.

7. Troubleshooting

If you encounter issues with your DEERC RC Car, try the following:

8. Specifications

9. Warranty and Support

DEERC is committed to providing high-quality products and customer satisfaction. For any warranty claims, technical support, or inquiries regarding replacement parts, please contact DEERC customer service through the official website or your purchase platform. Keep your proof of purchase for warranty validation.

For additional information and product updates, visit the DEERC Store on Amazon.