Introduction
Thank you for choosing the OffiGo 180 cm Electric Standing Desk. This manual provides essential information for the safe and efficient use of your new desk. Please read these instructions carefully before assembly and operation, and keep them for future reference.
Safety Instructions
To ensure safe operation and prevent injury or damage, please observe the following guidelines:
- Always ensure the desk is properly secured to the floor to prevent tipping.
- Exercise caution when adjusting the desk height, especially if you are tall or have mobility issues.
- Keep the desk and its surroundings clear of obstacles to prevent accidents during height adjustment.
- Do not place liquids directly on the control panel or near electrical outlets.
- Ensure all cables are properly managed to avoid tripping hazards or interference with desk movement.
Image: A person standing comfortably at the OffiGo electric standing desk, demonstrating its ergonomic use and promoting a healthy posture.
Package Contents
Before beginning assembly, please verify that all components listed in the included detailed instruction manual are present and undamaged. If any parts are missing or damaged, please contact customer support.
Assembly Instructions
The OffiGo Electric Standing Desk features pre-assembled components to simplify the installation process. Detailed instructions with pictures and text are included in your package. Please follow these instructions carefully for a smooth assembly.
While an instructional video is mentioned as available, no direct video link is provided in this manual. Please refer to the physical manual for visual guidance.
Image: Close-up of desk features including the headphone hook, stable feet, and cable management grommet, which are part of the assembly.
Operating Instructions
Height Adjustment
Your OffiGo electric standing desk allows for flexible height adjustment to suit various user heights and preferences. The desk can be adjusted between 72 cm and 118 cm.
- Up/Down Buttons: Use the ▲ (Up) and ▼ (Down) buttons on the control panel to manually adjust the desk to your desired height.
- Memory Functions: The desk features 2 memory settings. To save a height, adjust the desk to the desired position, then press and hold one of the numbered memory buttons (1 or 2) until the LED display confirms the setting is saved. To recall a saved height, simply press the corresponding memory button.
The motor operates quietly (45–55 dB), ensuring a smooth and silent lifting and lowering process.
Image: Visual representation of the desk's height adjustment range (72 cm to 118 cm).
Image: Detailed view of the control panel with height adjustment and memory buttons.
Integrated Power and USB
The desk is equipped with 2 European standard compliant electrical outlets and 2 USB charging ports (USB-A and USB-C) for convenient power supply to your electronic devices. Simply plug your devices into the integrated ports on the desktop.
Cable Management and Hooks
Utilize the built-in cable grommet in the desktop to route and manage your cables, keeping your workstation tidy. Two practical hooks on the side of the desk provide a convenient place to hang headphones, backpacks, or other accessories.
Image: A fully equipped OffiGo standing desk demonstrating effective cable management and organization.
Maintenance
To maintain the appearance and functionality of your OffiGo standing desk, follow these simple maintenance tips:
- Cleaning: Wipe the desktop and frame with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
- Cable Check: Periodically inspect all cables for wear or damage. Ensure they are securely connected and not pinched by moving parts.
- Stability Check: Regularly check that all screws and fasteners are tight to ensure the desk remains stable.
Troubleshooting
If you encounter any issues with your OffiGo Electric Standing Desk, refer to the table below for common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Desk does not move | Power cable disconnected; Overload; Motor error | Check power connection; Reduce weight on desk (max 80 kg); Unplug for 10 seconds and replug. |
| Uneven height adjustment | Obstruction; Sensor calibration issue | Clear any obstructions; Perform a reset (refer to detailed manual for specific steps). |
| Memory function not working | Height not saved correctly | Re-save the desired height by pressing and holding the memory button until confirmed. |
| Noise during adjustment | Normal operation; Loose components | A low hum (45-55 dB) is normal. If excessive, check for loose screws or components. |
Specifications
Key technical specifications for the OffiGo 180 cm Electric Standing Desk:
| Feature | Detail |
|---|---|
| Brand | OffiGo |
| Desk Design | Standing Desk |
| Product Dimensions (D x W x H) | 80 cm x 180 cm x 72 cm |
| Color | Black |
| Style | Modern |
| Base Material | Alloy Steel |
| Top Material Type | Wood (FSC Certified 4-piece desktop) |
| Special Feature | Electric, Adjustable Height, 2 Memory Functions, Integrated Outlets & USB, Cable Grommet, Headphone Hooks |
| Minimum Height | 72 cm |
| Maximum Height | 118 cm |
| Desktop Thickness | 1.5 cm |
| Weight Capacity | 80 kg |
| Assembly Required | Yes |
| Included Components | Headphone hook |
| UPC | 850066549155 |
Image: Product dimensions and height range for the OffiGo standing desk.
Image: Illustration of the desk's stability and 80 kg load capacity.
Warranty and Support
The OffiGo Electric Standing Desk comes with a limited warranty. For specific warranty details, claims, or technical support, please refer to the warranty card included in your package or contact OffiGo customer service through the retailer where you purchased the product.