Introduction
Thank you for choosing the OLEVS Men's Chronograph Watch Model 2856. This timepiece combines classic design with modern functionality, featuring a precise quartz movement, chronograph subdials, and a durable stainless steel construction. This manual provides detailed instructions for setting up, operating, and maintaining your watch to ensure its longevity and accurate performance.
Image: The OLEVS Men's Chronograph Watch Model 2856, featuring a gold-silver stainless steel band and a striking blue dial with multiple subdials.
Setup
1. Adjusting the Watch Strap
Your OLEVS watch comes with a stainless steel bracelet. If the strap is too long, it can be adjusted by removing links. A free adjustable tool kit is typically included for this purpose. If you are unsure, it is recommended to have a professional jeweler adjust the strap to prevent damage.
2. Setting the Time and Date
- Pull out the crown: Gently pull the crown (middle button on the right side) to position 2.
- Set the date: Rotate the crown clockwise or counter-clockwise to set the correct date. Avoid setting the date between 9 PM and 3 AM, as this can interfere with the automatic date change mechanism.
- Set the time: Pull the crown out further to position 3. Rotate the crown to set the hour and minute hands. Ensure the 24-hour subdial (if present) is also correctly aligned with AM/PM. Push the crown back to position 1 to start the watch.
Image: Side view of the watch, indicating the crown for time adjustment and the pushers for chronograph control.
Operating the Chronograph and Subdials
1. Chronograph Function
The chronograph allows you to measure elapsed time.
- Start: Press the top pusher (button A) to start the chronograph. The chronograph second hand will begin to move.
- Stop: Press the top pusher (button A) again to stop the chronograph. The elapsed time will be displayed.
- Reset: Press the bottom pusher (button B) to reset the chronograph hands to their zero positions.
2. Reading Subdials
- Minute Subdial: Displays elapsed minutes during chronograph operation.
- 24-Hour / Moon Phase Subdial: Indicates the time in a 24-hour format and may feature a moon phase indicator, showing day or night.
- Skeleton Seconds Subdial: A decorative subdial that shows continuous seconds movement.
Image: A detailed view of the watch face, highlighting the minute, 24-hour/moon phase, and skeleton seconds subdials.
3. Luminous Hands and Markers
The watch features luminous hands and markers, allowing for readability in low-light conditions. These elements absorb light and glow in the dark.
Maintenance
1. Water Resistance
This watch is water-resistant up to 30 meters (3ATM), suitable for daily splashing and brief immersion. It is not recommended for swimming, diving, or showering, especially with hot water, as temperature changes can affect the seals. Do not operate the crown or pushers when the watch is wet.
Image: An OLEVS watch demonstrating its water resistance against splashes.
2. Cleaning
To clean your watch, wipe the case and strap with a soft, dry cloth. For the stainless steel band, a slightly damp cloth can be used, followed by immediate drying. Avoid using harsh chemicals or abrasive materials.
Image: A close-up of the watch's stainless steel band, highlighting its durable construction.
3. Battery Replacement
The watch is powered by a quartz movement, which requires a battery. When the watch stops or the second hand begins to skip, it indicates a low battery. Battery replacement should be performed by a qualified watch technician to ensure proper sealing and function.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Watch not running | Dead battery; Crown not pushed in | Replace battery (professional service recommended); Push crown fully into position 1. |
| Time/Date not setting | Crown not pulled out to correct position | Ensure crown is pulled out to position 2 (date) or position 3 (time). |
| Chronograph hands not resetting to zero | Requires calibration | Consult a watch technician for calibration. |
| Fogging under crystal | Moisture ingress | Indicates a breach in water resistance. Seek professional repair immediately to prevent further damage. |
Specifications
| Feature | Detail |
|---|---|
| Brand | OLEVS |
| Model Number | OPK-IN-G2856GG-GL (2856 Series) |
| Movement Type | Quartz |
| Display Type | Analog |
| Case Diameter | 42 mm |
| Case Thickness | 11.5 mm |
| Band Material | Stainless Steel |
| Band Width | 20 mm |
| Band Length | 22 cm |
| Crystal Material | Mineral Glass |
| Water Resistance Depth | 30 Meters (3ATM) |
| Special Features | Chronograph, Luminous Hands, Date Display, 24-Hour Subdial |
| Item Weight | 50 Grams |
Image: Diagram illustrating the key dimensions of the OLEVS watch, including dial diameter, case thickness, and band width.
Warranty Information
This OLEVS watch comes with a 30-day return and exchange policy. For specific warranty details beyond this period, please refer to the documentation provided with your purchase or contact customer support.
Customer Support
For any questions, technical assistance, or service requests regarding your OLEVS watch, please contact the manufacturer or authorized service center.
Manufacturer: OLEVS, VALUECART PRIVATE LIMITED
Importer/Packer: VALUECART PRIVATE LIMITED
Please retain your purchase receipt for warranty claims.
