1. Product Overview
The BN-LINK 60W Low Voltage Landscape Transformer converts 125V AC household current to a safe 12V DC output, ideal for various outdoor low voltage LED lighting applications. It features a built-in photocell sensor and countdown timer for automated operation, along with overload protection and a memory function for convenience.
Figure 1: Front view of the BN-LINK 60W Low Voltage Landscape Transformer.
Figure 2: The transformer converts 125V AC to 12V DC for landscape lighting, supporting up to 60W.
2. Safety Information
- Read all instructions before installation and use.
- This transformer is designed for outdoor use with low voltage LED lighting systems only. Do not use with incandescent or tungsten lights.
- Ensure the total wattage of connected lights does not exceed the transformer's 60W capacity.
- Install the transformer at least 12 inches (30 cm) above ground level.
- Always disconnect power before installing, servicing, or cleaning the unit.
- Do not immerse the transformer in water.
- The unit features built-in overload and short circuit protection. If an overload occurs, the power output will shut off automatically.
3. Package Contents
- 1 x BN-LINK 60W Low Voltage Landscape Transformer
- 1 x Power Cord (attached)
- Instruction Manual
4. Product Diagram
Familiarize yourself with the components and dimensions of your transformer.
Figure 3: Product dimensions (4.33"D x 2.36"W x 4.45"H).
Figure 4: Rear view with 2 mounting holes for stability and the 12V DC terminal clamping zone.
5. Setup and Installation
Follow these steps for proper installation of your low voltage landscape transformer.
- Choose Location: Select an outdoor wall location that is protected from direct heavy rain and at least 12 inches (30 cm) above ground. Ensure it is within reach of a 125V AC power outlet.
- Mounting: Use the built-in mounting holes on the back of the transformer. Mark appropriate locations on the wall, spaced 2.25 inches apart. Install wall-mounted screws, leaving 0.3-0.4 inches of external length for hanging. Securely hang the transformer.
- Connect Low Voltage Wires: Strip approximately 0.5 inches of insulation from your low voltage landscape lighting wires. Insert the bare wires into the terminal clamping zone on the transformer's rear and tighten the screws to secure the connection. Ensure a firm connection to prevent voltage drop.
- Power Connection: Plug the transformer's 5-foot power cord into a standard 125V AC outdoor outlet.
Figure 5: Easy installation steps for wall mounting.
Figure 6: Guide for selecting appropriate transformer wattage and cable gauge.
Figure 7: Important installation tips for optimal performance.
Installation Video
Video 1: Official BN-LINK video demonstrating the installation and features of the low voltage landscape transformer.
6. Operating Instructions
The transformer offers multiple operating modes for flexible control of your lighting.
Figure 8: Overview of operating modes and features.
Mode Selection
Press the 'MODE' button on the transformer to cycle through the available settings:
- Manual ON/OFF: Lights remain on or off until manually changed.
- Dusk to Dawn (AUTO ON/OFF): The built-in photocell sensor automatically turns lights on at dusk and off at dawn.
- Countdown Timer (AUTO ON + Timer): Lights turn on at dusk and automatically turn off after a set duration (2, 4, 6, 8, or 10 hours).
Figure 9: Photocell sensor operation for dusk-to-dawn functionality.
Figure 10: Visual representation of Dusk to Dawn mode.
Figure 11: Visual representation of Countdown Timer mode.
Memory Function
The transformer retains the last selected mode even after a power outage, eliminating the need for re-setting.
Figure 12: The transformer's memory function ensures settings are retained.
Operation Video
Video 2: Official BN-LINK video demonstrating the countdown timer and photocell sensor features.
7. Maintenance
The BN-LINK Low Voltage Landscape Transformer is designed for durability and minimal maintenance.
- Cleaning: Periodically wipe the exterior with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Inspection: Regularly check the power cord and low voltage wiring for any signs of damage, fraying, or loose connections. Address any issues promptly.
- Photocell Sensor: Ensure the photocell sensor is clean and unobstructed for accurate dusk-to-dawn operation.
Figure 13: The transformer's durable housing is designed to withstand various weather conditions.
8. Troubleshooting
If you encounter issues with your transformer, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights do not turn on. | No power to transformer, loose wiring, overload, incorrect mode. | Check power outlet, ensure secure wire connections, reduce load if overloaded, verify operating mode. |
| Lights stay on/off constantly. | Photocell obstructed, incorrect mode selected. | Clear any obstructions from the photocell, switch to Dusk to Dawn or Countdown Timer mode. |
| Lights flicker or are dim. | Voltage drop due to long wiring or insufficient wire gauge, loose connections, overloaded circuit. | Ensure proper wire gauge for length, check all connections, reduce total wattage. |
| Transformer repeatedly shuts off. | Overload or short circuit. | Disconnect some lights to reduce load, inspect wiring for short circuits. The built-in circuit breaker will reset once the issue is resolved. |
9. Specifications
| Feature | Specification |
|---|---|
| Brand | BN-LINK |
| Model | BNLC-60W-12L |
| Power Source | DC |
| Input Voltage | 125V AC |
| Output Voltage | 12V DC |
| Current Rating | 5 A |
| Maximum Frequency | 60 Hz |
| Product Dimensions (D x W x H) | 4.33" x 2.36" x 4.45" |
| Mounting Type | Wall Mount |
| Included Components | Cord |
| Certifications | CSA, ETL, UL Listed |
10. Warranty and Support
BN-LINK products are designed for reliability and performance. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty details, please refer to the product packaging or contact BN-LINK customer support.
If you have any questions, require technical assistance, or need to report an issue, please contact BN-LINK customer support through their official website or the retailer where the product was purchased. Please have your model number (BNLC-60W-12L) and purchase date available when contacting support.