Introduction
Thank you for purchasing the UNIWEIGH MG-100 Mini Pocket Digital Scale. This manual provides detailed instructions for the proper setup, operation, and maintenance of your new scale. Please read this manual thoroughly before use to ensure accurate measurements and extend the product's lifespan.
What's in the Box
- UNIWEIGH MG-100 Mini Pocket Digital Scale
- Protective Cover (doubles as a weighing tray)
- 2 x AAA Batteries
- User Manual
Image: The UNIWEIGH MG-100 scale, its packaging box, two AAA batteries, and the user manual.
Key Features
- High Precision: Measures with an accuracy of ±0.03g and a graduation of 0.01g.
- Maximum Capacity: Supports up to 100g.
- Multiple Weighing Units: Easily switch between grams (g), ounces (oz), troy ounces (ozt), pennyweights (dwt), carats (ct), and grains (gn).
- Compact and Portable Design: Small size (3.75 x 2.17 x 0.7 inches) and lightweight (2.46 ounces) for easy storage and transport.
- Backlit LCD Display: Orange backlit display ensures clear readability in various lighting conditions.
- Tare Function: Allows you to zero out the weight of a container.
- Calibration Function: User-friendly calibration process using a 100g weight (not included, but recommended for accuracy).
- Protective Cover: The scale's cover can be detached and used as a weighing tray.
- Auto Shut-Off: Conserves battery life.
Image: Detailed view of the scale's components, including the removable cover, weighing pan, LCD, and battery compartment.
Setup
- Unpack: Carefully remove the scale and all accessories from the packaging.
- Install Batteries: Open the battery compartment on the back of the scale. Insert the two AAA batteries, ensuring correct polarity (+/-). Close the compartment.
- Placement: Place the scale on a flat, stable, and vibration-free surface to ensure accurate readings. Avoid placing it near strong electromagnetic fields or extreme temperature changes.
Operating Instructions
1. Power On/Off
- To turn on the scale, press the "ON/OFF" button. The display will show "88888" and then "0.00g".
- To turn off the scale, press and hold the "ON/OFF" button for a few seconds until the display turns off. The scale also features an automatic shut-off function after a period of inactivity to save battery life.
2. Unit Conversion
- With the scale turned on, press the "MODE/CAL" button repeatedly to cycle through the available weighing units: g (grams), oz (ounces), ozt (troy ounces), dwt (pennyweights), ct (carats), and gn (grains).
- The selected unit will be displayed on the LCD screen.
Image: The scale showing a measurement and highlighting the six different units available for selection.
3. Tare Function
The Tare function allows you to subtract the weight of a container, so only the weight of the contents is measured.
- Turn on the scale and wait for it to display "0.00g".
- Place the empty container (e.g., the protective cover) on the weighing platform. The display will show the container's weight.
- Press the "TARE" button. The display will reset to "0.00g".
- Now, place the items you wish to weigh into the container. The display will show only the net weight of the items.
Image: A visual demonstration of the Tare function, showing how to zero the scale with a container before weighing contents.
4. Calibration
Calibration ensures the accuracy of your scale. A 100g calibration weight is recommended (not included).
- Turn on the scale.
- Press and hold the "MODE/CAL" button until "CAL" appears on the display, then release.
- The display will then flash the required calibration weight (e.g., "100.00g").
- Place the exact 100g calibration weight on the center of the weighing platform.
- Wait for the display to show "PASS" and then return to normal weighing mode. Calibration is complete.
Image: A visual guide demonstrating the calibration process using a 100g weight.
Maintenance
- Cleaning: Wipe the scale with a slightly damp cloth. Do not use abrasive cleaners or immerse the scale in water.
- Storage: Store the scale in a clean, dry place. Keep the protective cover on when not in use to prevent damage to the weighing platform.
- Battery Replacement: Replace batteries when the low battery indicator appears on the display. Remove batteries if the scale will not be used for an extended period.
- Handle with Care: Avoid dropping the scale or subjecting it to strong impacts, as this can affect its accuracy.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Scale does not turn on. | Dead or incorrectly installed batteries. | Check battery polarity or replace with new AAA batteries. |
| Inaccurate readings. | Unstable surface, scale needs calibration, or overloaded. | Place on a stable surface. Perform calibration. Ensure weight does not exceed 100g. |
| "EEEE" or "O_Ld" displayed. | Overload indication. | Remove the item immediately. The scale is overloaded. |
| "UNST" displayed. | Unstable reading. | Ensure the scale is on a stable surface and free from vibrations. |
Specifications
| Brand | UNIWEIGH |
| Model Number | MG-100 |
| Weight Limit | 100 Grams |
| Readout Accuracy | 0.01 Grams |
| Display Type | LCD (Backlit) |
| Weighing Units | g, oz, ozt, dwt, ct, gn |
| Special Features | Auto Shut Off, Portable, Tare Function, Calibration |
| Material | Plastic |
| Product Dimensions | 3.75 x 2.17 x 0.7 inches |
| Item Weight | 2.46 ounces (0.07 Kilograms) |
| Power Source | 2 x AAA Batteries (Included) |
Official Product Video
Video: An official product video demonstrating the features and usage of the UNIWEIGH Mini Pocket Digital Scale. This video shows the scale's compact size, multiple weighing units, and tare function in action.
Warranty and Support
The UNIWEIGH MG-100 Mini Pocket Digital Scale comes with a 24-Month Warranty from the date of purchase. Additionally, a 30-day money-back guarantee is provided for your satisfaction.
For any issues, questions, or support needs, please contact UNIWEIGH customer service. Refer to the contact information provided in your product packaging or on the official UNIWEIGH website.
