TREKURE 6000A Car Jump Starter with 160 PSI Air Compressor User Manual

1. Introduction

The TREKURE 6000A Car Jump Starter with 160 PSI Air Compressor (Model Beta07) is a versatile, multi-functional device designed for roadside emergencies and everyday convenience. This 10-in-1 unit combines a powerful jump starter, high-speed tire inflator, pressure gauge, power bank, and emergency lighting. This manual provides essential information for safe and effective operation.

Image 1.1: The TREKURE 6000A Car Jump Starter and Air Compressor unit.

2. Safety Information

Always read and understand all safety instructions before using the TREKURE 6000A. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Personal Precautions: Wear insulated gloves (included) and eye protection when operating the jump starter. Do not touch the battery clamps together.
• Vehicle Compatibility: Use only for 12V vehicles. Ensure the jump starter's peak current (6000A) and engine displacement compatibility (All gas/12L Diesel) match your vehicle's requirements.
• Battery Connection: Connect the red clamp to the positive (+) terminal of the vehicle's battery and the black clamp to the negative (-) terminal. Incorrect polarity will trigger safety alarms.
• Operating Environment: Do not operate in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Keep the device away from moisture and extreme temperatures (-20°C to 60°C).
• Children and Pets: Keep the device out of reach of children and pets.
• Integrated Safety Protections: The device features 10 intelligent safety protections, including reverse polarity, over-discharge, short circuit, over-charge, over-current, over-voltage, low voltage, over-heat, over-load, and spark-proof protection.

Image 2.1: Visual representation of the 10 intelligent safety protections.

3. Package Contents

Verify that all items are present in your package:

• TREKURE 6000A Jump Starter Unit
• Heavy Duty Smart Clamp (Booster Cables)
• Detachable Air Hose
• 3 Valve Connectors (for various inflatables)
• USB Charging Cable
• USB-C Charging Cable
• Insulated Gloves
• EVA Protection Case
• Instruction Manual

Image 3.1: All items included in the TREKURE 6000A product package.

4. Product Overview

The TREKURE 6000A features a robust design with an intuitive LED display and multiple ports for various functions.

4.1. Main Unit Features

• LED Display: Shows battery status, inflation progress, and error messages.
• Control Buttons: Power, Mode, Boost, and +/- for settings adjustment.
• Jump Start Port: For connecting the smart clamps.
• Air Hose Port: For connecting the detachable air hose.
• USB Output Ports (2x 18W): For charging mobile devices.
• PD 45W USB-C Port (Input/Output): For fast charging the unit or other compatible devices.
• 600lm LED Light: Multi-mode emergency light.
• Retractable Handle: For easy portability.

Image 4.1: Front view of the TREKURE 6000A with its LED display and controls.

5. Setup

5.1. Initial Charging

Before first use, fully charge the TREKURE 6000A. It is recommended to fully charge the unit every 3-6 months to maintain battery health.

1. Connect the provided USB-C charging cable to the PD 45W USB-C port on the jump starter.
2. Connect the other end of the USB-C cable to a compatible PD 45W wall charger (not included).
3. The LED display will show the charging progress. The unit is fully charged when the display shows 100%.
4. A full charge from 0% to 100% typically takes approximately 2 hours with a 45W wall charger.

Image 5.1: Fast charging the TREKURE 6000A unit.

6. Operating Instructions

6.1. Jump Starting a Vehicle

Ensure the jump starter is at least 50% charged before attempting to jump start a vehicle.

1. Connect Clamps: Insert the plug of the heavy-duty smart clamp completely into the jump start port on the TREKURE 6000A.
2. Attach to Battery: Connect the red clamp to the positive (+) terminal of the vehicle's battery and the black clamp to the negative (-) terminal. Ensure a secure connection. The smart clamp will indicate a correct connection (usually a green light). If an error is detected (e.g., reverse polarity), an alarm will sound.
3. Activate Boost: Press and hold the "BOOST" button on the jump starter for 3 seconds until the LCD screen displays "BOOST".
4. Start Vehicle: Start your car engine.
5. Disconnect: Once the vehicle starts, immediately remove the smart clamp from the car battery, then disconnect the clamp from the jump starter.

Image 6.1: TREKURE 6000A connected to a car battery for jump starting.

Image 6.2: Visual instructions for jump starting a vehicle.

6.2. Tire Inflation

The integrated 160 PSI air compressor can inflate tires quickly and efficiently.

1. Connect Air Hose: Screw the detachable air hose onto the air hose port on the jump starter. Connect the other end to the tire valve stem and tighten.
2. Power On & Select Mode: Press the Power button to turn on the device. Press the "M" (Mode) button to select the desired inflation mode (Car, Motorcycle, Bicycle, Ball, or Custom). Use the +/- buttons to set the target pressure. The device features automatic memory for previous settings.
3. Start Inflation: Long press the Power button to start inflation. The display will show the current pressure.
4. Auto Stop: The compressor will automatically shut off once the preset pressure is reached.
5. Disconnect: Disconnect the air hose from the tire valve and the jump starter.

Image 6.3: Inflating a car tire using the TREKURE 6000A.

Image 6.4: Visual instructions for tire inflation.

6.3. Power Bank Functionality

The TREKURE 6000A can charge various electronic devices.

• Connect your device's charging cable to one of the dual 18W USB output ports or the PD 45W USB-C port.
• The device will automatically begin charging.
• The PD 45W USB-C port supports fast charging for compatible phones, tablets, and laptops.

Image 6.5: Charging multiple devices with the TREKURE 6000A.

6.4. Emergency Lighting

The 600-lumen LED light offers four modes for various situations.

• Flashlight: Provides steady illumination.
• White Strobe: For signaling or attracting attention.
• Orange Strobe: Functions as a triangle warning light for roadside safety.
• SOS: Emits the international distress signal.

Image 6.6: The TREKURE 6000A's LED light in use.

7. Maintenance

• Charging: Recharge the unit fully after each use and every 3-6 months when not in use to prolong battery life.
• Cleaning: Wipe the device with a dry, soft cloth. Do not use harsh chemicals or abrasive materials.
• Storage: Store the device in its EVA protection case in a cool, dry place, away from direct sunlight and extreme temperatures.

8. Troubleshooting

If you encounter issues, refer to the following common troubleshooting steps:

• Device Not Turning On: Ensure the unit is charged. Press and hold the power button for a few seconds.
• Jump Starter Not Working: Check battery clamps for secure and correct polarity connection. Ensure the "BOOST" function is activated. The vehicle battery might be severely discharged; try the forced start function if available and safe.
• Air Compressor Not Inflating: Ensure the air hose is securely connected to both the unit and the tire valve. Check that the correct inflation mode and target pressure are set.
• Error Messages: Refer to the specific error code displayed on the LED screen and consult the full instruction manual for detailed explanations and solutions.

9. Specifications

10. Warranty and Support

For warranty information, technical support, or any inquiries regarding your TREKURE 6000A, please refer to the contact details provided in the original product packaging or visit the official TREKURE website.