Introduction
Thank you for choosing the Vigosit Gaming Chair. This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your new gaming chair. Please read this manual carefully before assembly and use to ensure proper function and longevity of the product. Keep this manual for future reference.
Safety Information
To ensure safe operation and prevent injury or damage, please adhere to the following safety guidelines:
- Maximum Weight Capacity: This chair is designed to support a maximum weight of 350 lbs (approximately 158 kg). Do not exceed this weight limit.
- Assembly: Assemble the chair strictly according to the instructions provided. Ensure all screws and bolts are securely tightened before use. Periodically check and re-tighten fasteners.
- Stability: Avoid sudden movements or leaning excessively to one side, especially when reclining, to prevent tipping.
- Children: Keep small children and pets away from the chair during assembly. The chair contains small parts that could be a choking hazard.
- Moving Parts: Be cautious of pinch points when adjusting the chair's height, recline, or footrest.
- Surface: Use the chair on a flat, stable surface. The casters are designed for hard floors.
Setup and Assembly
The Vigosit Gaming Chair requires assembly. Please follow these steps carefully. It is recommended to have a second person assist with certain steps for easier assembly.
Package Contents:
Before starting, verify that all parts are present and undamaged. Refer to the included parts list in your physical manual for specific component identification.
Assembly Steps:
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
- Attach Casters to Base: Insert the five casters into the holes at the end of each leg of the chair base. Push firmly until they click into place.
- Install Gas Lift: Place the gas lift cylinder into the center hole of the chair base. Ensure it is seated firmly.
- Assemble Mechanism to Seat: Attach the chair mechanism to the underside of the seat cushion using the provided screws. Ensure the front of the mechanism aligns with the front of the seat.
- Attach Armrests: Secure the integrated armrests to the seat cushion using the designated screws.
- Connect Backrest to Seat: Align the backrest with the seat and attach it using the appropriate screws. Ensure a secure connection.
- Place Seat Assembly onto Gas Lift: Carefully place the assembled seat and backrest onto the gas lift cylinder, ensuring the center hole of the mechanism aligns with the top of the gas lift.
- Attach Lumbar Pillow and Headrest: Position the adjustable memory foam lumbar pillow and headrest according to your comfort preference. The lumbar pillow may have a power cord for massage function; connect it to a suitable USB power source.
Figure 1: Key components of the Vigosit Gaming Chair. This image illustrates the massage ergonomic lumbar support, signature linkage armrest, high load-bearing base, retractable footrest, gas cylinder, and ergonomic highback design, which are crucial for assembly and understanding chair functions.
Operating Instructions
Your Vigosit Gaming Chair is designed with multiple adjustable features to provide optimal comfort and support for various activities such as working, gaming, reading, or napping.
- Height Adjustment: To adjust the chair's height, locate the lever on the right side, beneath the seat. Pull the lever up while seated to lower the chair, or pull it up while standing to raise it. Release the lever at your desired height.
- Recline Function: The chair supports a recline angle from 90° to 155°. To recline, pull the recline lever (typically on the left side) and lean back. Release the lever to lock the backrest in position.
- Retractable Footrest: To extend the footrest, pull the handle located on the side of the seat. Pull it out until it locks into place. To retract, push it back in until it slides fully under the seat.
- Lumbar Pillow Adjustment: The memory foam lumbar pillow is adjustable. Slide it up or down along the backrest straps to find the position that best supports your lower back. If equipped with a massage function, ensure it is connected to a USB power source.
- Headrest Adjustment: The headrest is designed to provide natural fit and support. Adjust its position by sliding it along the straps on the upper backrest to align with your neck and head.
- 360° Swivel: The chair features a 360° swivel function, allowing for easy rotation without moving the base.
- Integrated Armrests: The armrests are designed to move with the recline of the chair, providing continuous support.
Figure 2: Widened Backrest and Cushion Design. This diagram highlights the 'no extrusion' widened seat cushion and sponge-thickened widened backrest, designed for enhanced comfort and ample space, especially for extended use.
Figure 3: Dual Headrest Support System. This illustration details how the two headrests provide natural fit, rear-end reinforcement, and concave surround support, complemented by high-quality memory foam for superior neck comfort.
Maintenance
Regular maintenance will help preserve the appearance and functionality of your Vigosit Gaming Chair.
- Cleaning PU Leather and Mesh: For general cleaning, wipe the PU leather and mesh fabric surfaces with a soft, damp cloth. For stubborn stains, use a mild soap solution and wipe dry immediately. Avoid harsh chemicals or abrasive cleaners, as they can damage the material.
- Checking Fasteners: Periodically inspect all screws and bolts to ensure they are tight. Re-tighten any loose fasteners to maintain stability and prevent wobbling.
- Caster Care: Clean any debris (hair, dust, etc.) from the casters regularly to ensure smooth rolling.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause the PU leather to fade or crack. Position the chair away from direct sunlight if possible.
- Weight Distribution: Distribute your weight evenly when sitting to prevent undue stress on specific parts of the chair.
Figure 4: Breathable Material Construction. This image shows the four layers of material (Mesh, Fabric, Sponge, and Breathable Gauze) that contribute to the chair's skin-friendly, breathable, and abrasion-resistant properties, making it easy to maintain.
Troubleshooting
If you encounter any issues with your Vigosit Gaming Chair, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair feels unstable or wobbly. | Loose screws or bolts; uneven floor. | Check and re-tighten all assembly screws, especially those connecting the backrest, seat, and armrests. Ensure the chair is on a flat, level surface. |
| Armrests become loose or wobbly. | Armrest attachment screws are loose. | Locate the screws securing the armrests to the chair and tighten them using the appropriate hex key. Periodically check these screws. |
| Chair does not adjust height smoothly. | Gas lift issue; mechanism obstruction. | Ensure no obstructions are blocking the gas lift or mechanism. If the issue persists, the gas lift may need replacement. Contact customer service. |
| Footrest does not extend or retract smoothly. | Obstruction in the sliding mechanism. | Check for any foreign objects obstructing the footrest's tracks. Clean the tracks if necessary. |
| Lumbar support massage function not working. | USB cable disconnected or power source issue. | Ensure the USB cable for the lumbar support is securely connected to a working USB power source (e.g., computer, power bank, wall adapter). |
| Material (PU leather) peeling or showing wear prematurely. | Excessive friction, improper cleaning, or environmental factors. | Ensure proper cleaning methods are used (mild soap, damp cloth). Avoid abrasive contact. While the material is durable, extreme conditions can affect it. |
Specifications
Detailed specifications for the Vigosit Gaming Chair PRO:
| Feature | Detail |
|---|---|
| Brand | Vigosit |
| Model Number | Vigosit Gaming Chair PRO |
| Color | Grey |
| Product Dimensions | 19.5"D x 20.5"W x 40"H |
| Size | Thickened Spring Cushion |
| Back Style | Open Back |
| Special Features | Thickened Cushion, Adjustable Memory Foam Lumbar Pillow, Retractable Footrest, Ergonomic Design |
| Unit Count | 1.0 Count |
| Recommended Uses | Gaming, Office |
| Pattern | Solid |
| Finish Type | Brushed |
| Age Range (Description) | Adult |
| Arm Style | Track |
| Surface Recommendation | Hard Floor |
| Indoor/Outdoor Usage | Indoor |
| Furniture Finish | Leather |
| Fill Material | Foam |
| Leg Style | Turned Leg |
| Reclining Position Count | Multiple |
| UPC | 702571475354 |
| Form Factor | Recliner |
| Manufacturer | Vigosit |
| First Available Date | May 21, 2024 |
Warranty and Support
Vigosit is committed to providing high-quality products and excellent customer service.
- Replacement Policy: We offer a 1-month replacement policy for defective products.
- Parts Warranty: A 1-year parts warranty is provided for components of the Vigosit Gaming Chair. This warranty covers manufacturing defects and material flaws under normal use.
- Customer Service: For any questions, concerns, or assistance with assembly, operation, or warranty claims, our 24-hour online customer service team is available to help.
For further information or to contact support, please visit the official Vigosit store: Vigosit Store on Amazon.
Figure 5: Fast Customer Support. This image depicts customer service representatives, symbolizing the readily available 24/7 online support for any product inquiries or issues.