CaDA C61502W Building Set Instruction Manual

1. Introduction

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your CaDA C61502W building set. This highly detailed model replicates the iconic Mazda RX-7 at a 1:8 scale, offering an engaging and rewarding building experience.

Image: The CaDA Master Mazda RX-7 building set, officially licensed, highlighting its authentic design.

Image: Two CaDA Mazda RX-7 models, illustrating the impressive 1:8 scale of the building set.

2. Safety Information

WARNING:

• Not suitable for children under the age of 14. This product contains small parts which may pose a choking hazard.
• Adult supervision is recommended during assembly and play.
• Keep away from open flames and direct heat sources.
• Do not ingest any parts.

3. Package Contents

Upon opening the package, please verify that all components are present and undamaged. The CaDA C61502W building set typically includes:

• Building blocks for the Mazda RX-7 model (approx. 1895 pieces)
• Instruction manual (this document)
• Remote control unit
• Motors and electronic components for power functions
• Connecting wires
• Exclusive type label/display plaque

Image: The CaDA C61502W product box, the fully assembled Mazda RX-7 model, and the included power function components like the remote control, motors, and connecting wires.

Image: The assembled CaDA Mazda RX-7 model displayed with its exclusive type label, indicating the inclusion of a display plaque.

4. Setup (Assembly)

Follow the step-by-step instructions provided in the physical instruction manual included in your package. Organize your building blocks by color and type to facilitate the assembly process. Pay close attention to the diagrams and part lists for each step.

• Step 1: Unpack all components and verify against the parts list.
• Step 2: Begin assembly following the numbered steps in the manual.
• Step 3: Ensure all connections are secure to prevent parts from detaching.
• Step 4: Integrate the power function components (motors, wires, remote control) as indicated in the manual for operational features.

Image: A partially assembled CaDA Mazda RX-7 model, showcasing some of the printed pieces and the overall construction process.

5. Operating

The CaDA C61502W model features several functional elements once fully assembled, including a working rotary engine, functional steering, a manual four-speed transmission, and opening parts.

5.1 Power Functions

Refer to the specific sections in your physical instruction manual for detailed steps on connecting and operating the electronic power functions (motors and remote control). Ensure batteries are correctly installed in the remote control and battery box (if applicable).

5.2 Functional Features

• Working Rotary Engine: Observe the intricate details of the rotary engine as it simulates movement.
• Functional Steering Wheel: Turn the steering wheel to control the direction of the front wheels.
• Manual Four-Speed Transmission: Engage the manual transmission to simulate gear changes.
• Opening Parts: The model features opening doors, an engine hood, and a trunk for enhanced realism and playability.

Image: A collage demonstrating the key functional features of the CaDA C61502W model: a working rotary engine, functional steering wheel, manual four-speed transmission, and opening doors, hood, and trunk.

Image: Detailed view of the CaDA C61502W's rotary engine, highlighting its intricate design and movable twin-rotor engine simulation.

6. Maintenance

To ensure the longevity and optimal condition of your CaDA C61502W building set, follow these maintenance guidelines:

• Cleaning: Dust the model regularly with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth and dry immediately. Avoid harsh chemicals or abrasive cleaners.
• Storage: Store the model in a cool, dry place away from direct sunlight to prevent discoloration and material degradation.
• Handling: Handle the model with care, especially when moving it, to avoid accidental detachment of parts.
• Electronic Components: If the model includes electronic components, remove batteries if the model will not be used for an extended period to prevent battery leakage.

7. Troubleshooting

If you encounter any issues with your CaDA C61502W building set, consider the following common troubleshooting steps:

• Missing Parts: Double-check the packaging and surrounding area. If parts are genuinely missing, contact customer support (see Section 9).
• Loose Connections: If a part detaches or a function doesn't work, inspect the connections. Reassemble any loose or incorrectly placed blocks.
• Power Function Issues:
  • Ensure batteries in the remote control and battery box are fresh and correctly inserted with the correct polarity.
  • Check all wire connections between motors, battery box, and remote receiver.
  • Verify that the motors are not obstructed by other blocks.
• Difficulty with Assembly: Refer back to the specific steps in the physical instruction manual. Online resources or community forums may also offer visual guides.

8. Specifications

Image: Diagram showing the approximate dimensions of the assembled CaDA C61502W model: 56.2cm length, 27.5cm width, and 21.6cm height.

9. Warranty and Support

For warranty information, missing parts, or technical support, please refer to the contact details provided on the product packaging or visit the manufacturer's official website.

Manufacturer: Shenzhenshi TaiZhongBei KeJiYouxiangongsi

Official Website: http://en.doubleeagle-group.com/cada/

Additional Resources: http://www.doubleeagle.cc/poster.php?news_id=1380

Image: The back of the CaDA C61502W product box, displaying safety warnings, manufacturer information, and QR codes for additional resources and support.