WELLFOR 24-Inch Brushed Gold Round Wall Mounted Bathroom Vanity Mirror

1. Introduction

Thank you for choosing the WELLFOR 24-Inch Brushed Gold Round Wall Mounted Bathroom Vanity Mirror. This manual provides essential information for the safe installation, operation, and maintenance of your new mirror. Please read these instructions thoroughly before beginning installation and retain them for future reference.

This mirror features a durable aluminum frame with a brushed gold finish, copper-free glass for clear reflection, and a modern rounded design suitable for various interior styles.

2. Safety Information

• Handle the mirror with care to prevent breakage and injury.
• Ensure the mounting surface is structurally sound and capable of supporting the mirror's weight.
• Wear appropriate safety gear, such as gloves and eye protection, during installation.
• Keep children and pets away from the installation area.
• If you are unsure about any part of the installation process, consult a qualified professional.

3. Package Contents

Verify that all components are present and undamaged before proceeding with installation.

• 1 x WELLFOR 24-Inch Round Wall Mounted Mirror
• 1 x Mounting Hardware Kit (screws, wall anchors)
• 1 x Instruction Manual

4. Tools Required

The following tools are recommended for installation:

• Pencil
• Tape Measure
• Level
• Drill
• Drill Bits (appropriate for wall anchors)
• Screwdriver (Phillips head)

5. Setup and Installation

Follow these steps to properly install your WELLFOR mirror:

1. Prepare the Wall: Choose the desired location for your mirror. Use a pencil and level to mark the exact positions for the mounting hardware. Ensure the marks are level and spaced correctly for the mirror's hanging mechanism.
2. Drill Pilot Holes: Using a drill and the appropriate drill bit for your wall type and anchors, drill pilot holes at the marked locations.
3. Insert Wall Anchors: Gently tap the wall anchors into the pilot holes until they are flush with the wall surface.
4. Install Screws: Drive the mounting screws into the wall anchors, leaving a small portion of the screw head exposed to hang the mirror. Ensure the screws are securely fastened.
5. Hang the Mirror: Carefully lift the mirror and align its hanging mechanism with the exposed screw heads. Gently lower the mirror until it rests securely on the screws. Verify that the mirror is stable and level.

Image: Dimensions of the 24-inch round mirror, showing 24"L x 24"W and 1.5" depth.

Image: Detail of the mirror's 1.5-inch frame depth and beveled edge.

Installation Video Guide

6. Maintenance

To keep your WELLFOR mirror in optimal condition:

• Cleaning the Glass: Use a soft, lint-free cloth and a non-abrasive glass cleaner. Spray the cleaner onto the cloth, not directly onto the mirror, to avoid liquid seeping behind the frame. Wipe gently until clean and streak-free.
• Cleaning the Frame: Wipe the brushed gold aluminum frame with a soft, dry cloth. Avoid harsh chemicals or abrasive materials that could damage the finish.
• Regular Inspection: Periodically check the mounting hardware to ensure it remains secure.

7. Troubleshooting

If you encounter any issues with your mirror, refer to the following common solutions:

• Mirror is not level: Carefully adjust the mirror on the mounting screws until it is level. If necessary, remove the mirror and re-adjust the screw positions.
• Mirror feels loose: Remove the mirror and ensure the wall anchors and screws are properly installed and tightened. If the wall anchors are damaged, replace them with new ones.
• Scratches or damage to the frame: Minor scratches may be touched up with a matching paint pen. For significant damage, contact customer support.

8. Specifications

Image: Key features of the mirror's construction and glass quality.

9. Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact WELLFOR customer service directly. Keep your purchase receipt as proof of purchase.