1. Introduction
This manual provides essential information for the safe and effective use of your AVID POWER 20V MAX 1.5 Ah Lithium Ion Rechargeable Battery. Please read these instructions carefully before use and retain them for future reference. This battery is specifically designed for use with the AVID POWER 20V cordless Yellow ACAP110D-Y Tire Inflator and is not compatible with other AVID POWER battery-powered tools.
2. Important Safety Information
Always observe basic safety precautions when using battery packs to reduce the risk of fire, electric shock, and personal injury.
General Battery Safety
- Do not disassemble, open, or shred the battery pack.
- Do not short-circuit a battery pack. Store battery packs away from metal objects that could make a direct connection between the positive and negative terminals.
- Do not expose battery packs to heat or fire. Avoid storage in direct sunlight.
- Do not subject battery packs to mechanical shock.
- In the event of battery leakage, do not allow the liquid to come into contact with skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.
- Keep battery packs clean and dry.
- Do not use any charger other than that specifically provided for use with the equipment.
- Do not use any battery pack that is not designed for use with the equipment.
- Keep battery packs out of the reach of children.
- Dispose of battery packs properly according to local regulations.
Integrated Protection Features
This AVID POWER battery pack includes multiple protection systems to ensure safe operation and longevity:
- Over-charge Protection: Prevents the battery from being charged beyond its safe voltage limit.
- Over-heating Protection: Monitors battery temperature to prevent damage from excessive heat.
- Over-discharge Protection: Prevents the battery from being discharged below its safe voltage limit.
- Over-current Protection: Safeguards against excessive current draw.
- Over-voltage Protection: Protects against voltage spikes.
- Short Circuit Protection: Automatically cuts off power in case of a short circuit.
Figure 2.1: Battery Warning Label. This label provides important safety warnings and disposal instructions. To reduce the risk of injury, users must read and understand the instruction manual.
3. Product Overview
The AVID POWER 20V MAX 1.5 Ah Lithium Ion Rechargeable Battery is a high-performance power source designed for specific AVID POWER tools. It features a real-time capacity indicator for convenience.
Figure 3.1: AVID POWER 20V MAX 1.5 Ah Lithium Ion Rechargeable Battery. This image displays the overall design of the battery pack, including its branding and LED indicator lights.
Key Components
- Latch: Secures the battery to the compatible tool or charger.
- Connector: Electrical terminals for power transfer.
- Charging Port & Indicator: Allows connection to a charger and displays battery capacity and charging status via LED lights.
Figure 3.2: Battery Detail Design. This composite image highlights the latch mechanism, the electrical connector, and the charging port with its LED capacity indicator.
4. Compatibility
This AVID POWER 20V MAX 1.5 Ah Lithium Ion Rechargeable Battery is only compatible with the AVID POWER 20V cordless Yellow ACAP110D-Y Tire Inflator. It is not designed for use with other AVID POWER tools such as cordless drills, blowers, or power saws. Using this battery with incompatible tools may result in damage to the tool, battery, or personal injury.
Figure 4.1: Battery and Compatible Tire Inflator. This image illustrates the battery positioned alongside the specific AVID POWER ACAP110D-Y Tire Inflator it is designed to power.
5. Charging the Battery
The battery pack requires an AVID POWER 20V charger (not included). Ensure you use the correct charger for this battery model.
Charging Procedure
- Connect the charger to a standard power outlet.
- Align the battery pack with the charger and slide it into place until it clicks securely.
- The LED indicator on the battery will show the charging status. A full charge typically takes 3-5 hours.
- Once fully charged, remove the battery from the charger.
Note: The LED indicator shows real-time capacity and charging status. Refer to your charger's manual for specific indicator light patterns.
6. Installation and Removal
Installing the Battery
- Ensure the tool is turned off.
- Align the battery pack with the battery port on the AVID POWER ACAP110D-Y Tire Inflator.
- Slide the battery into the port until you hear a "click," indicating it is securely latched.
Removing the Battery
- Ensure the tool is turned off.
- Press and hold the battery release latch (refer to Figure 3.2).
- Slide the battery pack out of the tool.
7. Operation
Checking Battery Capacity
The battery features an LED indicator that displays the remaining capacity. Press the small button next to the LED lights to activate the indicator. The number of illuminated LEDs corresponds to the charge level:
- 3 LEDs: High charge
- 2 LEDs: Medium charge
- 1 LED: Low charge, recharge soon
8. Maintenance and Storage
Proper maintenance and storage will extend the life of your AVID POWER battery pack.
- Regular Charging: To extend battery life, fully charge the battery after each use.
- Long-Term Storage: If storing the battery for an extended period, ensure it is charged every three months to prevent deep discharge.
- Storage Environment: Avoid storing batteries in cold places, as low temperatures can cause them to fail or reduce their performance. Store in a dry place, away from direct sunlight and extreme temperatures.
- Cleaning: Keep the battery terminals clean. Use a clean, dry cloth to wipe away any dust or debris.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Battery not charging | Charger not plugged in; faulty charger; battery too hot/cold; battery faulty. | Check charger connection; try a different outlet; allow battery to reach room temperature; contact customer support if issues persist. |
| Battery not powering tool | Battery not fully charged; battery not properly installed; battery faulty; tool faulty. | Charge battery fully; ensure battery is clicked into place; test battery on another compatible tool if available; contact customer support. |
| Short run time | Battery not fully charged; battery nearing end of life; extreme operating conditions. | Ensure full charge before use; consider replacing battery if performance significantly degrades; operate within recommended temperature ranges. |
10. Specifications
| Feature | Detail |
|---|---|
| Model | ACAP110D-Y Compatible Battery |
| Voltage | 20V MAX |
| Capacity | 1.5 Ah (27Wh) |
| Battery Type | Lithium Ion |
| Charging Time | 3-5 hours (with compatible charger) |
| Product Dimensions | 4.7 x 2.2 x 3.1 inches |
| Item Weight | 12.3 ounces |
| Manufacturer | AVID POWER |
Figure 10.1: Battery Dimensions. This image provides a visual representation of the battery's physical measurements.
11. Warranty and Support
For warranty information or technical support regarding your AVID POWER 20V MAX 1.5 Ah Lithium Ion Rechargeable Battery, please refer to the documentation included with your original purchase or visit the official AVID POWER website. You may also contact AVID POWER customer service directly for assistance.
No relevant product videos were found for inclusion in this manual based on the provided criteria.