Introduction
The PDP Afterglow Wave Wireless RGB Gaming Controller is designed to enhance your gaming experience on Nintendo Switch, Switch Lite, Switch - OLED Model, and Nintendo Switch 2. Featuring vibrant RGB LED lighting, built-in motion controls, and programmable back buttons, this controller offers both style and performance. Its ergonomic design ensures comfort during extended play sessions, and the long-lasting rechargeable battery provides up to 20 hours of playtime.
Front view of the PDP Afterglow Wave Wireless RGB Gaming Controller, showcasing its white finish and illuminated RGB zones.
Setup
1. Initial Charging
Before first use, fully charge your Afterglow Wave Wireless Controller. Connect the included USB-C cable to the controller's charging port and the other end to a USB power source (e.g., Nintendo Switch dock, USB wall adapter). The LED indicators on the controller will show charging status and turn off when fully charged. A full charge provides up to 20 hours of gameplay.
The controller features a USB-C port for charging, providing over 20 hours of play time per charge.
2. Pairing with Nintendo Switch
- From the Nintendo Switch HOME Menu, select Controllers > Change Grip/Order.
- On the Afterglow Wave Wireless Controller, press and hold the Sync Button (located on the top edge, near the USB-C port) for 3 seconds until the player LEDs begin to flash.
- Once the controller is successfully paired, the player LED(s) corresponding to the controller number will remain lit.
- Press the A button to confirm.
Operating Instructions
Button Layout
| Button | Function |
|---|---|
| Left/Right Analog Sticks | Movement, Camera Control |
| A/B/X/Y Buttons | Action Buttons |
| D-Pad | Directional Input |
| L/R Buttons | Shoulder Buttons |
| ZL/ZR Buttons | Trigger Buttons |
| + (Plus) Button | Start/Options |
| - (Minus) Button | Select/Menu |
| Home Button | Return to HOME Menu |
| Capture Button | Take Screenshots/Video Clips |
| Programmable Back Buttons (P1, P2) | Customizable functions for quicker responses |
RGB Lighting Customization
The Afterglow Wave controller features eight customizable RGB LED lighting zones and four pre-set modes. Refer to the detailed instructions included in the controller's packaging or the official PDP website for specific steps on how to cycle through modes and customize lighting effects.
The controller features 8 RGB lighting zones and 4 pre-set modes for dynamic visual effects.
Programmable Back Buttons
The two programmable quick-action back buttons (P1 and P2) allow for customized gameplay. To program these buttons, follow the instructions below:
- Press and hold the Program Button (small button on the back of the controller) until the LED indicator flashes.
- Press the Back Button (P1 or P2) you wish to program.
- Press the Button on the front of the controller that you want to map to the back button (e.g., A, B, X, Y, L, R, ZL, ZR, D-pad directions).
- Release the Program Button. The LED indicator will stop flashing, confirming the mapping.
The back of the controller features two programmable buttons for quicker responses during gameplay.
Motion Controls
The controller includes built-in motion controls for immersive gameplay in compatible titles. These controls automatically activate when supported by the game.
The controller is equipped with built-in motion controls for enhanced gaming immersion.
Wireless Connection
Enjoy a reliable, low-latency wireless connection with up to a 30-foot range, allowing for flexible gaming positions.
The controller offers a 30-foot wireless range for flexible gameplay.
Maintenance
Charging
To maintain optimal battery life, charge the controller regularly. Avoid completely draining the battery frequently. Use only the provided USB-C cable or a certified equivalent.
Cleaning
Wipe the controller with a soft, dry cloth. For stubborn dirt, lightly dampen the cloth with water. Do not use harsh chemicals or abrasive cleaners, as these can damage the controller's finish and internal components.
Storage
Store the controller in a cool, dry place away from direct sunlight and extreme temperatures. Avoid placing heavy objects on the controller to prevent damage.
Troubleshooting
- Controller not pairing: Ensure the controller is charged. On the Switch, go to 'Change Grip/Order' and press the Sync button on the controller. If issues persist, restart your Nintendo Switch console.
- Buttons unresponsive: Check if the controller is properly paired and charged. If a specific button is not working, try re-pairing the controller. If the issue continues, contact customer support.
- RGB lighting not working: Ensure the controller is powered on. Refer to the lighting customization section or the official PDP website for instructions on how to activate and cycle through lighting modes.
- Short battery life: Ensure the controller is fully charged before use. Battery performance can vary based on usage and lighting settings.
Specifications
- Model Number: 500-252-WH
- Dimensions: 6.29 x 2.55 x 5.31 inches
- Weight: Approximately 0.015 ounces
- Connectivity: Wireless (30-foot range)
- Battery: Rechargeable Lithium Polymer (up to 20 hours playtime)
- Compatibility: Nintendo Switch, Nintendo Switch Lite, Nintendo Switch - OLED Model, Nintendo Switch 2
- Features: 8 RGB lighting zones, 4 pre-set lighting modes, Programmable back buttons, Built-in motion controls
- Official Licensing: Officially licensed by Nintendo®
Warranty and Support
PDP products are designed for quality and performance. For warranty information or technical support, please visit the official PDP website or contact their customer service department. Keep your proof of purchase for any warranty claims.
PDP Official Website: www.pdp.com
