Introduction
This manual provides detailed instructions for the Newmowa 4.95-inch Phone Vlog Selfie Monitor Screen. It covers product features, setup, operation, maintenance, troubleshooting, and specifications to ensure optimal use of your device. Please read this manual thoroughly before using the product.

Image: Comparison of front and rear camera quality when using the monitor.
Package Contents
Verify that all items listed below are included in your package. If any items are missing or damaged, please contact customer support.
- 1 x Selfie & Vlog Screen
- 1 x Magnetic Phone Holder
- 1 x Bluetooth Remote Control
- 1 x Dual USB-C Cable
- 1 x Type-C Charging Cable
- 1 x Velvet Bag
- 1 x Instruction Manual

Image: Contents of the Newmowa PH05 MAX package.
Setup
1. Attaching the Phone Holder and Monitor
The monitor comes with a flexible magnetic phone holder. Extend the holder to fit your smartphone, which supports devices between 3.15 to 4.33 inches in width. The holder features a 1/4" screw hole for mounting on a tripod or other compatible device. A cold shoe port on top allows for attaching fill lights or microphones.

Image: Magnetic phone holder and monitor dimensions.
2. Connecting to Your iPhone
The monitor supports both wired and wireless connections to your iPhone (iOS 9 and above).
- Wired Recording (4K 30fps): For iPhone 15/16/17 series, use the included dual USB-C cable. For iPhone 11-14 series, use your original Lightning to USB-C cable. This mode supports audio output from your iPhone.
- Wireless Recording (1080P): Connect wirelessly for 1080P recording. Note that audio output from the iPhone is not supported in wireless mode. Ensure you select 1080P recording to avoid delays.

Image: Wired vs. Wireless connection modes and their capabilities.
3. Pairing the Bluetooth Remote Control
The included Bluetooth remote control allows you to capture photos and videos from up to 33 feet (10 meters) away.
- Ensure the remote control has power.
- Activate Bluetooth on your iPhone.
- Search for and select the remote control in your iPhone's Bluetooth settings to pair.
- Once paired, use the button on the remote to trigger photo or video capture on your iPhone.

Image: Using the Bluetooth remote control for distant capture.
Operating Instructions
1. Power On/Off and Screen Rotation
To power on the device, press and hold the power button. A short press of the power button will rotate the screen image by 180°, allowing for convenient viewing from different angles without disassembling the setup.

Image: Screen rotation function.
2. Screen Flip and Display Ratio
The monitor offers options for screen mirroring and display ratio adjustments.
- Short Press: Activates screen mirroring.
- Long Press: Toggles between full screen and 1:1 preview screen display ratios.
3. Charging the Monitor
The monitor is equipped with a Type-C charging port. Use the included Type-C charging cable to power the device.
- Connect the Type-C cable to the monitor and a 5V 1A wall charger, power bank, laptop, or car charger.
- The LED indicator will glow RED during charging.
- The LED indicator will turn GREEN when fully charged.

Image: Charging the monitor with a Type-C cable.
4. Usage Scenarios
The Newmowa monitor enhances various content creation activities:
- Vlogging: Use the rear camera for higher quality video while monitoring your shot in real-time.
- Selfies: Capture high-resolution selfies using the rear camera, ensuring you are perfectly framed.
- Live Streaming: Maintain eye contact and monitor your appearance during live broadcasts.
- Group Photos: Easily compose group shots with the rear camera, ensuring everyone is in frame.
- Teleprompter: Utilize the screen for teleprompter applications during presentations or recordings.

Image: Examples of product use in various scenarios.
Maintenance
- Keep the monitor clean by wiping it with a soft, dry cloth.
- Avoid exposing the device to extreme temperatures, humidity, or direct sunlight.
- Do not use harsh chemicals or abrasive cleaners on the screen or body.
- Store the monitor in the provided velvet bag when not in use to protect it from scratches and dust.
- The device is not waterproof; avoid contact with water or other liquids.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Monitor screen is blank or not turning on. | Low battery or power issue. | Charge the monitor using the provided Type-C cable and a 5V 1A power source. Ensure the LED indicator turns red. |
| No image displayed from iPhone. | Incorrect connection or incompatible settings. |
|
| Lag or delay in wireless recording. | Incorrect recording resolution selected. | When using wireless recording, ensure you select 1080P resolution on your iPhone to prevent lag. |
| Bluetooth remote not pairing or working. | Remote battery low, not in pairing mode, or interference. |
|
| No audio output in wireless mode. | This is expected behavior for wireless mode. | Audio output is only supported during wired 4K 30fps recording. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | PH05 MAX |
| Screen Size | 4.95 inches |
| Compatible Devices | iPhone (iOS 9 and above) |
| Wired Video Capture Resolution | 4K (3840 x 2160) at 30fps |
| Wireless Video Capture Resolution | 1080P (1920 x 1080) |
| Video File Format | MP4 |
| Audio Recording | Supported with wired 4K 30fps connection only |
| Bluetooth Remote Range | Up to 33 feet (10 meters) |
| Battery | Built-in 3.7V 1500mAh |
| Charging Input | 5V 1A (Type-C port) |
| Product Weight | 150 Grams |
| Waterproof Level | Not waterproof |
Warranty and Support
The Newmowa 4.95-inch Phone Vlog Selfie Monitor Screen comes with a one-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or natural disasters.
For warranty claims, technical support, or any inquiries regarding your product, please contact Newmowa customer service through the retailer where you purchased the product or visit the official Newmowa website for contact information. Please have your purchase receipt and product model number (PH05 MAX) ready when contacting support.