Introduction
The Vivilumens 3-in-1 Wireless Charger is a versatile device designed to streamline your charging experience while offering additional functionalities. It combines wireless charging capabilities for multiple Apple devices, a Bluetooth speaker with a dynamic pixel animation display, and a customizable digital clock with alarm features. This manual provides comprehensive instructions for setting up, operating, and maintaining your device to ensure optimal performance and longevity.
Figure 1: Vivilumens 3-in-1 Wireless Charger with Bluetooth Speaker, showing its compact design and multiple charging points for iPhone, Apple Watch, and AirPods, along with the digital display and included 18W adapter.
What's in the Box
Upon unboxing your Vivilumens 3-in-1 Wireless Charger, please ensure all the following components are present:
- 1 x Vivilumens 3-in-1 Wireless Charger Station
- 1 x 18W Power Adapter
- 1 x Type-C Cable
- 1 x Instruction Manual
Figure 2: Package contents, including the wireless charger, 18W power adapter, Type-C cable, and instruction manual.
Setup
- Power Connection: Connect the provided Type-C cable to the USB-C port on the back of the wireless charger. Plug the other end of the cable into the 18W power adapter, and then plug the adapter into a wall outlet. The digital display should illuminate, indicating the device is powered on.
- Device Placement:
- iPhone: The top charging pad is magnetic (MagSafe compatible). Lift the top charging pad to an upright position. Place your iPhone (iPhone 12/13/14/15/16 series recommended for magnetic charging) onto the magnetic charging pad. Ensure it aligns correctly for optimal charging.
- Apple Watch: A retractable charging module for Apple Watch is located on the side of the main unit. Gently pull out this module. Place your Apple Watch (Series 2-10, SE, Ultra) onto the charging disc.
- AirPods/Qi-enabled Earbuds: A dedicated charging area for AirPods (2, Pro, Pro2, 3) and other Qi-enabled earbuds is located behind the iPhone charging pad. Place your earbud case onto this designated area.
Figure 3: The Vivilumens charger connected to power, with an iPhone, Apple Watch, and AirPods placed on their respective charging areas, demonstrating simultaneous charging.
Operating Instructions
Wireless Charging
The charger supports 15W wireless fast charging for compatible iPhones, 5W for earbuds, and 2.5W for Apple Watch. For optimal charging, ensure your devices are centered on their respective charging pads. The device features intelligent protection against overcharging, overheating, and short-circuiting.
Figure 4: The iPhone charging pad can be adjusted 360 degrees for horizontal or vertical viewing while charging.
Figure 5: Illustration showing the importance of using magnetic cases (less than 2mm thick) or no case for effective MagSafe charging.
Bluetooth Speaker
The built-in Bluetooth speaker delivers clear audio for music playback. It does not support voice assistants or calls.
- Pairing: Long press the power/play/pause button to enter Bluetooth mode. The device will announce "Bluetooth mode". On your phone, search for "S5-SPEAKER" in your Bluetooth settings and connect.
- Playback Control: Short press the power/play/pause button to play or pause music.
- Volume Control: Long press the '+' button to increase volume, and long press the '-' button to decrease volume.
- Track Control: Short press the '+' button to switch to the next music track, and short press the '-' button to switch to the previous music track.
Video 1: Demonstrates how to use the Bluetooth function, including pairing, playing/pausing music, and adjusting volume and tracks.
Video 2: Overview of the Vivilumens Multifunctional Wireless Charging Station, highlighting its features including the Bluetooth speaker and charging capabilities.
Pixel Animation Display
The integrated pixel display screen automatically switches between 11 pixel animations, adding a unique visual element. It can also display an equalizer that vibrates to the rhythm of your music.
- Switching Modes: In Bluetooth mode, short press the 'M' button to cycle through display modes: Clock (initial), Pixel animation group, Close screen.
- Brightness Adjustment: The clock display has 4 brightness modes. Use the '+' and '-' buttons to adjust brightness when the clock is displayed.
Figure 6: The dynamic pixel display cycling through various animations and an equalizer display.
Digital Clock & Alarm
The device features an integrated clock with 12/24-hour switchable display and alarm functionality.
- Setting Time: Long press the 'M' button to enter clock setting mode. Use the '+' and '-' buttons to adjust the hour. Short press 'M' again to switch to minute setting, and adjust using '+' and '-'. Short press 'M' to save and exit.
- 12/24-Hour System: Double press the 'M' button to switch between 12-hour and 24-hour systems.
- Alarm Function: The alarm function allows you to set reminders or wake up on time. Specific alarm setting instructions are typically detailed in the included manual.
Video 3: Guide on how to set the clock on the Vivilumens 3-in-1 Wireless Charger.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the surface of the charger. Avoid using abrasive cleaners or solvents.
- Storage: When not in use for extended periods, store the charger in a cool, dry place away from direct sunlight and extreme temperatures.
- Handling: Handle the device with care. Avoid dropping it or subjecting it to strong impacts.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not charging. | Not properly connected to power; device not aligned on charging pad; incompatible device/case. | Ensure the charger is securely plugged into the 18W adapter and wall outlet. Realign the device on the charging pad. Remove thick or non-magnetic cases. Ensure device is Qi-enabled. |
| Bluetooth speaker not pairing. | Device not in pairing mode; Bluetooth disabled on phone; incorrect device selected. | Long press the power/play/pause button to enter Bluetooth mode. Ensure Bluetooth is enabled on your phone. Select "S5-SPEAKER" from your phone's Bluetooth list. |
| Digital display not working. | Device not powered on; display mode is off. | Check power connection. Short press the 'M' button to cycle through display modes until the clock or animation appears. |
| Charging is slow. | Using a non-18W adapter; multiple devices charging simultaneously; device overheating. | Use the provided 18W power adapter. Charging multiple devices simultaneously may reduce individual charging speeds. Ensure proper ventilation. |
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 2.64 x 2.64 x 4.29 inches |
| Item Weight | 2.56 ounces |
| Item Model Number | S5A-BT |
| Batteries | 1 Lithium Polymer batteries required (included) |
| Brand | Vivilumens |
| Color | Black |
| Hardware Interface | USB Type C |
| Compatible Devices | Earbuds: AirPods 2 (with wireless case), AirPods pro, AirPods pro2, AirPods 3; Samsung Galaxy Buds, Buds+, Buds Pro, Buds Live; Soundcore Liberty Air 2, Air 2 Pro, 2 Pro (All TWS earphones with wireless charging). Smart Phone: For Apple: iPhone 16, iPhone 16 Pro, iPhone 16 Pro Max, iPhone 16 Plus, iPhone15, iPhone15 Pro, iPhone15 Pro Max, 15 Plus, iPhone 14, iPhone 14 Pro, iPhone 14 Pro Max, iPhone 14 Plus, iPhone 13, iPhone 13 Pro, iPhone 13 Pro Max, iPhone 13 mini, iPhone 12, iPhone 12 Pro, iPhone 12 Pro Max, iPhone 12 mini, iPhone SE (2 Generation) (Note: Magnetic charging of cell phones is only applicable to iPhone 12/13/14/15/16 series). Apple Watch: Series 10 9 8 7 6 5 4 3 2 SE. |
| Total USB Ports | 1 |
| Wattage | 18 watts (Input) |
| Wireless Phone Output | 15W/10W/7.5W/5W (Qi compatible devices) |
| Wireless Earbuds Output | 5W (Qi compatible devices) |
| Wireless Apple Watch Output | 2.5W |
Warranty & Support
For warranty information, technical support, or any inquiries regarding your Vivilumens 3-in-1 Wireless Charger, please refer to the contact information provided in the original product packaging or visit the official Vivilumens website. Keep your purchase receipt for warranty claims.
