Cecotec Bongo Serie Z Electric Scooter User Manual

1. Important Safety Instructions

Before operating your Cecotec Bongo Serie Z electric scooter, please read and understand all safety instructions. Failure to follow these instructions may result in serious injury or damage to the scooter.

• Wear Protective Gear: Always wear a helmet, knee pads, and elbow pads when riding.
• Observe Traffic Laws: Adhere to all local traffic laws and regulations for electric scooters.
• Age and Weight Limits: This scooter is designed for adults. Do not exceed the maximum weight capacity of 100 kg.
• Braking System: The scooter features a triple braking system with high-precision disc brakes and e-ABS with regenerative braking. Familiarize yourself with its operation before riding.
• Water Resistance: The scooter has an IPX4 water resistance rating, meaning it is protected against splashing water from any direction. Avoid submerging the scooter or riding in heavy rain.
• Pre-Ride Check: Always check the brakes, tires, and battery level before each ride.

2. Package Contents and Initial Assembly

Your Cecotec Bongo Serie Z electric scooter comes partially assembled. Please ensure all components are present and follow these steps for initial setup.

2.1. Package Contents

• 1 x Electric Scooter
• 1 x Charger
• 1 x Tool Bag
• 1 x User Manual

2.2. Assembly Steps

1. Unpack: Carefully remove all components from the packaging.
2. Attach Handlebars: Lift the steering column and securely attach the handlebars. Ensure all cables are properly connected and not pinched. Use the provided tools to tighten any screws.
3. Check Connections: Verify that all visible connections are secure and tight.
4. Initial Charge: Before first use, fully charge the scooter's battery. Refer to the 'Charging the Battery' section for details.

3. Charging the Battery

To ensure optimal performance and battery longevity, follow these charging guidelines.

• Connect Charger: Plug the charger into the scooter's charging port, then connect it to a power outlet.
• Charging Indicator: The charger will typically have an indicator light (e.g., red for charging, green for fully charged).
• Charging Time: Allow sufficient time for a full charge, especially before the first use. The scooter features a 12600 mAh battery, providing an autonomy of up to 60 km.
• Safety: Do not leave the scooter charging unattended for extended periods. Avoid charging in extreme temperatures.

4. Operating Your Scooter

This section details how to power on, ride, and utilize the features of your Cecotec Bongo Serie Z electric scooter.

4.1. Power On/Off

• Power On: Press and hold the power button on the handlebar display until the screen illuminates.
• Power Off: Press and hold the power button again until the display turns off.

4.2. LED Display Functions

The integrated LED display provides real-time information about your ride.

• Speed: Current riding speed.
• Battery Level: Remaining battery charge.
• Kilometers: Distance traveled.
• Temperature: Motor temperature.
• Voltage: Battery voltage.

4.3. Riding and Braking

• Acceleration: Use the throttle to control your speed. The scooter has a maximum power of 1300W (800W nominal) and 48V, allowing it to climb slopes up to 15%.
• Braking: Apply the brake levers smoothly. The triple braking system with e-ABS and regenerative braking provides efficient stopping power. Regenerative braking helps recharge the battery during deceleration.
• Suspension: The SX technology double-arm suspension and 10.5-inch ON Road wheels are designed to provide a smooth ride over various terrains.

5. Maintenance and Care

Regular maintenance will extend the life and performance of your electric scooter.

• Cleaning: Wipe the scooter with a damp cloth. Do not use high-pressure water jets or corrosive cleaners. Ensure the charging port cover is securely closed.
• Tire Pressure: Regularly check and maintain the correct tire pressure for the 10.5-inch ON Road wheels. Proper inflation improves ride quality and battery efficiency.
• Brake Adjustment: Periodically inspect the disc brakes for wear and ensure they are properly adjusted. If you notice reduced braking performance, consult a qualified technician.
• Storage: Store the scooter in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, ensure the battery is partially charged (around 50-70%) and recharge it every few months.
• Fasteners: Check all screws and bolts periodically to ensure they are tight.

6. Troubleshooting

If you encounter issues with your scooter, refer to this section for common solutions.

6.1. Common Issues

• Scooter Not Turning On:
  • Check battery level.
  • Ensure power button is pressed correctly.
  • Verify all connections are secure.
• Reduced Range/Power:
  • Battery may not be fully charged or is degrading.
  • Tire pressure may be too low.
  • Riding conditions (e.g., steep hills, heavy load, strong headwind) can affect range.
• Brakes Squealing/Ineffective:
  • Brake pads may be worn or require adjustment.
  • Disc brakes may be dirty.
• Display Not Working:
  • Check for loose connections to the display.
  • Ensure the scooter is powered on.

6.2. Contacting Support

If you cannot resolve an issue using the troubleshooting steps, please contact Cecotec customer support for assistance. Do not attempt complex repairs yourself, as this may void your warranty.

7. Technical Specifications

8. Warranty and Support

Cecotec products are manufactured to high-quality standards. For warranty information, please refer to the specific terms and conditions provided with your purchase or visit the official Cecotec website.

• Spare Parts Availability: Cecotec ensures the availability of spare parts for this model for 10 years.
• Customer Support: For technical assistance, warranty claims, or general inquiries, please contact Cecotec customer service. Contact details can typically be found on the official Cecotec website or in the documentation included with your scooter.