1. Introduction
Thank you for choosing the Dreo Smart Wall Heater WH719S. This manual provides essential information for the safe operation, installation, and maintenance of your new heater. Please read it thoroughly before use and retain it for future reference.
2. Important Safety Instructions
WARNING: To reduce the risk of fire, electric shock, or injury, observe the following:
- Read all instructions before using this heater.
- This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Use handles when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater and keep them away from the sides and rear.
- Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
- Always unplug the heater when not in use.
- Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped, or damaged in any manner. Discard heater or return to an authorized service facility for examination and/or repair.
- Do not use outdoors.
- This heater is not intended for use in bathrooms, laundry areas, and similar indoor locations. Never locate heater where it may fall into a bathtub or other water container.
- Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
- To disconnect heater, turn controls to OFF, then remove plug from outlet.
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
- To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
- A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable vapors or liquids are used or stored.
- Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
- Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
- Ensure the heater is mounted securely to a wall as instructed.
3. Package Contents
- Dreo Smart Wall Heater Body
- Remote Control
- Accessory Package (mounting hardware)
- Quick Start Guide
- User Manual
4. Product Overview
Familiarize yourself with the components of your Dreo Smart Wall Heater.
Image: The Dreo Smart Wall Heater, showing its main unit, included remote control, and a smartphone displaying the Dreo app interface. The heater features a digital display and a 120-degree oscillation indicator.
Image: The Dreo Smart Wall Heater mounted on a light-colored wall, emitting warm air downwards and outwards, illustrating its wall-mounted design and heat distribution.
5. Setup and Installation
The Dreo Smart Wall Heater is designed for easy wall mounting. Follow these steps for secure installation:
- Choose a Location: Select a suitable indoor wall location, ensuring it is away from curtains, furniture, and other combustible materials. Ensure there is a power outlet within reach of the heater's power cord.
- Prepare for Mounting: Use the provided drilling guide to mark the screw holes on the wall. A level is recommended to ensure straight installation.
- Drill Holes: Drill pilot holes at the marked locations. Insert wall anchors if necessary, depending on your wall material.
- Mount the Heater: Secure the mounting bracket (if separate) or the heater directly to the wall using the provided screws. Ensure it is firmly attached.
- Connect Power: Plug the heater into a standard 120V electrical outlet. The heater features a convenient cable recess for tidy power cord management.
Image: A diagram illustrating the dimensions and installation process of the Dreo wall heater, highlighting the included drilling guide and cable recess for easy setup.
6. Operating Instructions
Your Dreo Smart Wall Heater offers multiple ways to control its functions: the control panel, remote control, and the Dreo app with voice assistant compatibility.
6.1. Control Panel
The control panel is located on the front of the heater. It includes buttons for power, mode selection, temperature adjustment, oscillation, and timer settings. The digital display shows current settings and room temperature.
6.2. Remote Control
The included remote control provides convenient access to all heater functions from a distance.
6.3. Dreo App and Smart Control
Download the Dreo app to unlock advanced features and control your heater from anywhere.
- Pairing: Follow the in-app instructions to connect your heater to your home Wi-Fi network.
- Remote Access: Turn the heater on/off, adjust temperature, change modes, and set timers from your smartphone.
- Customizable Schedules: Create personalized heating schedules to match your daily routine.
- Voice Control: Integrate with Amazon Alexa or Google Home for hands-free operation.
Image: A hand holding a smartphone displaying the Dreo app, which shows controls for the heater, including temperature settings and scheduling options. The heater is visible in the background.
Image: A visual representation of the Dreo app interface, demonstrating how users can set smart schedules for the heater, including specific times and temperatures for different days.
6.4. Heating Modes and Temperature Control
- Temperature Range: Set your desired room temperature between 41°F and 95°F with 1°F accuracy.
- ECO Mode: An energy-saving mode that automatically adjusts heat output to maintain a comfortable temperature efficiently.
- Dedicated Thermal Sensor: Ensures precise temperature monitoring and control.
Image: A close-up view of the Dreo heater's digital display, showing a set temperature of 95°F and indicating the adjustable temperature range from 41°F to 95°F, along with a dedicated thermal sensor for accuracy.
6.5. Oscillation
The heater features 120° vertical oscillation to distribute warm air widely and evenly throughout the room.
Image: The Dreo Smart Wall Heater mounted on a wall, with an arrow indicating its 120-degree maximum vertical oscillation for widespread heat distribution.
6.6. Timer
Set the 24-hour timer to automatically turn the heater on or off at your preferred times.
6.7. Sleep Mode
The LED panel brightness automatically adjusts to low-light conditions, providing warmth with minimal disturbance for a good night's sleep.
7. Maintenance
Regular maintenance ensures optimal performance and longevity of your heater.
7.1. Cleaning the Exterior
- Always unplug the heater before cleaning.
- Use a soft, damp cloth to wipe the exterior surfaces. Do not use abrasive cleaners or solvents.
- Ensure no water enters the interior of the heater.
7.2. Filter Maintenance
The heater is equipped with a detachable, reusable filter for easy cleaning.
- Periodically remove the filter from the heater.
- Clean the filter with a soft brush or vacuum cleaner to remove dust and debris.
- Rinse the filter with water if necessary, ensuring it is completely dry before reinserting.
Image: A close-up diagram illustrating the detachable filter component of the Dreo wall heater, indicating its easy removal for cleaning and maintenance.
8. Troubleshooting
If you encounter issues with your heater, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. | No power, power switch off, safety feature activated. | Check power cord connection. Ensure power switch is ON. Reset by unplugging for 10 minutes. |
| No heat or insufficient heat. | Temperature setting too low, ECO mode active, blocked air intake/outlet. | Increase temperature setting. Adjust mode. Clear any obstructions. Clean filter. |
| Heater makes unusual noise. | Dust in fan, loose component. | Clean the filter and air vents. If noise persists, contact customer support. |
| App cannot connect to heater. | Wi-Fi issues, incorrect pairing process. | Ensure Wi-Fi is active and heater is within range. Re-attempt pairing process as per app instructions. |
9. Specifications
| Feature | Specification |
|---|---|
| Brand | Dreo |
| Model Number | DR-HSH009S (WH719S) |
| Heat Output | 1500 Watts |
| Voltage | 120 Volts |
| Heating Coverage | Up to 215 sq ft (primary), up to 750 sq ft (supplementary) |
| Oscillation | 120° Vertical |
| Temperature Range | 41°F to 95°F |
| Special Features | Adjustable Temperature, Digital Display, Electronic Thermostat, Remote Control, Wi-Fi Enabled (Alexa, Google Home) |
| Timer | 24-Hour |
| Product Dimensions | 4.72"D x 20.08"W x 13.39"H |
| Item Weight | 10.18 pounds |
| Mounting Type | Wall Mount |
| Fuel Type | Electric |
| Burner Type | PTC Ceramic |
| Indoor/Outdoor Usage | Indoor |
10. Warranty and Support
Dreo products come with a manufacturer's warranty. For detailed warranty information, please refer to the warranty card included in your package or visit the official Dreo website. If you have any questions, require technical assistance, or need to report an issue, please contact Dreo Customer Support.
Contact Information: Please refer to the Quick Start Guide or the official Dreo website for the most up-to-date customer support contact details.