1. Introduction
Thank you for choosing the WESA 1-Gang 1-Way Wall Switch, Model EP-01-LV. This mechanical wall switch is designed for controlling a single light or electrical circuit from one location. It features a refined aesthetic and is built with high-quality, non-conductive materials for safety and durability. This manual provides essential information for safe installation, operation, and maintenance of your new switch.

Image 1.1: The WESA 1-Gang 1-Way Wall Switch (Model EP-01-LV) in green.

Image 1.2: The versatile design of the WESA switch allows installation in various indoor environments, including bedrooms, living rooms, kitchens, and bathrooms.
2. Safety Information
Please read all safety instructions carefully before installation and use. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Professional Installation Recommended: Electrical work should ideally be performed by a qualified electrician.
- Power Disconnection: Always turn off the main power supply at the circuit breaker before installing, maintaining, or troubleshooting the switch. Verify that the power is off using a voltage tester.
- Voltage and Current: This switch is rated for 10 Amps and 250 Volts. Do not exceed these ratings.
- Non-Conductive Material: The switch is constructed from non-conductive material to enhance safety.
- Flame Retardant: The materials used are high-temperature flame retardant to prevent fire hazards.
- Multiple Protection Features: The switch incorporates anti-static, overvoltage, short circuit, and overcurrent protection to safeguard your home's electrical system.

Image 2.1: The switch is made from high-temperature flame retardant material, designed to prevent fire hazards.

Image 2.2: The switch offers multiple layers of protection, including anti-static, overvoltage, short circuit, and overcurrent safeguards, ensuring the safety of your electrical system.
3. Installation
The package includes the switch and necessary screws for installation. Follow these steps for proper installation:
- Turn Off Power: Before starting any electrical work, ensure the power supply to the circuit is completely turned off at the main circuit breaker.
- Remove Old Switch (if applicable): Carefully remove the existing switch from the wall box. Disconnect the wires, noting their connections.
- Prepare Wires: Strip approximately 10-12mm of insulation from the ends of the electrical wires.
- Connect Wiring: Connect the wiring according to the electrical diagram provided. For a 1-way switch, you will typically connect the live (phase) wire to one terminal and the switched live wire (to the light fixture) to the other terminal. Ensure all connections are secure.
- Mount the Switch: Gently push the switch into the wall box. Use the provided screws to secure the switch to the wall box.
- Attach Faceplate: Secure the decorative faceplate over the switch mechanism.
- Restore Power: Once installation is complete and all connections are secure, turn the main power supply back on at the circuit breaker.

Image 3.1: This diagram illustrates the general dimensions and internal wiring connections for a standard wall switch. Ensure proper wire stripping and secure connections.
4. Operation
The WESA 1-Gang 1-Way Wall Switch is designed for simple and reliable operation.
- Switching On/Off: Press the rocker switch to toggle the connected light or appliance on or off.
- Single Control Point: This 1-way switch controls a single circuit from one location.

Image 4.1: The switch features a smooth texture and high-quality materials for comfortable and reliable operation.
5. Maintenance
To ensure the longevity and proper functioning of your WESA wall switch, follow these simple maintenance guidelines:
- Cleaning: Wipe the surface of the switch with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the finish or internal components.
- Inspection: Periodically inspect the switch for any signs of damage, loose connections, or discoloration. If any issues are observed, turn off the power and consult a qualified electrician.
- Avoid Impact: While the switch features a firm shell and is designed for durability, avoid strong impacts or excessive force on the switch mechanism.

Image 5.1: The switch is designed with a firm shell for anti-drop and impact resistance, contributing to its overall durability.
6. Troubleshooting
If you encounter any issues with your WESA wall switch, consider the following common troubleshooting steps:
- No Power to Light:
- Check the circuit breaker to ensure it has not tripped.
- Verify that the light bulb is working and properly screwed in.
- Ensure all wiring connections at the switch and light fixture are secure (after turning off power at the breaker).
- Switch Feels Loose:
- Turn off power at the breaker.
- Carefully remove the faceplate and tighten the mounting screws that secure the switch to the wall box.
- Flickering Light:
- This could indicate a loose connection. Turn off power and check wiring.
- Ensure the light bulb is compatible with the circuit.
If these steps do not resolve the issue, please contact customer support or a qualified electrician.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | WESA |
| Model Number | EP-01-LV |
| Part Number | EP-01-LV |
| Color | Green |
| Material | Non-conductive material |
| Finish Type | Painted |
| Configuration | Single (1-Gang 1-Way) |
| Installation Type | Screw-in |
| Switch Style | Rocker |
| Power Rating | 10 Amps, 250 Volts |
| Country of Origin | China |
8. Warranty and Support
WESA is committed to providing friendly customer service and ensuring your satisfaction. If you have any questions, require assistance with installation, or experience any issues with your product, please do not hesitate to contact us. Your satisfaction is our priority.
For support, please refer to the contact information provided with your purchase or visit the official WESA website.